The Si influence on the microstructure and oxidation resistance of Ti-Al slurry coatings on Ti-48Al-2Cr-2Nb alloy
Source abstract
Abstract
Abstract In the presented study, different Ti-Al-Si coatings were deposited on Ti-48Al-2Cr-2Nb (at. %) alloy via the slurry method. Al and Si's nominal content in coatings was varied (100 at. % Al, Al-5Si, Al-12.5 Si, Al-20Si, Al-40Si, Al-60Si, Al80Si, 100 at. % Si) to find an optimal coating resistant to high-temperature oxidation. The deposited materials were analyzed because of the microstructure and phase composition. Afterwards, the obtained modified aluminide coatings were subjected to the isothermal oxidation at 900 °C for 500 h. After the oxidation experiment, the oxidized coatings were evaluated, taking into account the microstructure, chemical and phase composition of the oxidation products. The most favourable oxidation behaviour was noticed for the aluminide coatings with Si's small content (respectively 5 and 12.5 at.% Si). In these cases, on the surfaces, the protective α-alumina scale was formed. Moreover, the Ti5Si3 phase was detected for the oxidized Al-12.5Si (at. %) coating. In the case of other coatings, the formation of TiO2 oxide on the surface was observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Microstructural evolution and mechanical properties of a forged gamma titanium aluminide alloy10.1016/0956-7151(92)90411-7 ↗
2. Novel design concepts for gamma-base titanium aluminide alloys10.1016/S0966-9795(00)00036-4 ↗
3. Review of alloy and process development of TiAl alloys10.1016/j.intermet.2005.10.019 ↗
4. Gamma titanium aluminide alloys—an assessment within the competition of aerospace structural materials10.1016/S0921-5093(98)01158-7 ↗
5. Gamma titanium aluminides as prospective structural materials10.1016/S0966-9795(00)00073-X ↗
6. Tensile properties and fracture toughness of TiAl alloys with controlled microstructures10.1016/0966-9795(96)00047-7 ↗
7. Deformed microstructures during creep of TiAl alloys: role of mechanical twinning10.1016/S0966-9795(97)00002-2 ↗
8. Oxidation behavior of titanium aluminides
9. The oxidation behavior of several Ti-Al alloys at 900°C in air10.1023/A:1018839511102 ↗
10. High-temperature oxidation behavior of elemental powder metallurgy processed TiAl-Mn-Mo-C alloys with yttrium addition10.2320/matertrans.45.1272 ↗
11. Mechanism of isothermal oxidation of the intermetallic TiAI and of TiA1 alloys10.1007/BF00665663 ↗
12. Microalloying effects in the oxidation of TiAl materials10.1016/S0966-9795(99)00032-1 ↗
13. Alloying effects on properties of Al2O3 and TiO2 in connection with oxidation resistance of TiAl10.1016/j.intermet.2015.09.005 ↗
14. Oxidation behavior of TiAl-X (X = Cr, V, Si, Mo or Nb) intermetallics at elevated temperature10.1016/0956-716X(95)00327-R ↗
15. Review of the effect of alloy composition on the growth rates of scales formed during oxidation of gamma titanium aluminide alloys10.1016/S0921-5093(02)00064-3 ↗
16. Thermogravimetric investigation on oxidation kinetics of complex Ti-Al alloys10.1016/j.intermet.2017.09.020 ↗
17. Effect of Al2O3 and enamel coatings on 900°C oxidation and hot corrosion behaviors of gamma-TiAl10.1016/S0921-5093(99)00513-4 ↗
18. Improving the oxidation resistance of TiAl-alloys with fluorine10.1016/j.jallcom.2006.12.157 ↗
19. Microstructure and high-temperature wear and oxidation resistance of laser clad γ/W2C/TiC composite coatings on γ-TiAl intermetallic alloy10.1016/j.jallcom.2006.08.065 ↗
20. Oxidation behaviour of TiAl3 coatings and alloys10.1016/0010-938X(93)90340-M ↗
21. Diffusion of oxygen in the Al2O3 oxidation product of TiAl310.1007/s11661-000-0081-7 ↗
22. Gas phase aluminizing of TiAl intermetallics10.1016/j.intermet.2009.01.015 ↗
23. Si-modified aluminide coatings deposited on Ti46Al7Nb alloy by slurry method10.1016/j.intermet.2009.04.006 ↗
24. Diffusion aluminide coatings for TiAl intermetallic turbine blades10.1016/j.intermet.2010.12.015 ↗
25. Microstructural evolution and hardness of TiAl3 and TiAl2 phases on Ti–45Al–2Nb–2Mn–1B by plasma pack aluminizing10.1016/j.apsusc.2013.03.043 ↗
26. Pack deposition of coherent aluminide coatings on γ-TiAl for enhancing its high temperature oxidation resistance10.1016/S0257-8972(02)00469-3 ↗
27. Effect of pre-oxidation on the properties of aluminide coating layers formed on Ti alloys10.1016/j.jallcom.2004.07.073 ↗
28. Microstructure of diffusion aluminide coatings on Ti-base alloy IMI-834 and their cyclic oxidation behaviour at 650 °C10.1016/j.msea.2003.10.196 ↗
29. Oxidation protection of γ-TiAl-based alloys – a review10.1016/j.intermet.2014.08.002 ↗
30. High temperature oxidation behavior and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: a review10.1016/j.jallcom.2016.06.212 ↗
31. Characterization of Si-aluminide coating and oxide scale microstructure formed on γ-TiAl alloy during long-term oxidation at 950 °C10.1016/j.intermet.2017.04.015 ↗
32. Microstructure and oxidation resistance of Si modified aluminide coating on TiAl based alloys10.1179/1743294414Y.0000000411 ↗
33. Microstructure and high temperature oxidation behavior of Ti-Al-Nb-Si coatings on Ti-6Al-4V alloy10.1016/j.jallcom.2018.06.238 ↗
34. Microstructure and properties of Ti-Al coating and Ti-Al-Si system coatings on Ti-6Al-4V fabricated by laser surface alloying10.1016/j.surfcoat.2016.10.082 ↗
35. The effect of Nb and Si on the hot corrosion behaviors of TiAl coatings on aTi-6Al-4V alloy10.1016/j.corsci.2020.108578 ↗
36. Oxidation resistance of diffusion coatings formed by pack-codeposition of Al and Si on γ-TiAl10.1023/B:JMSC.0000017772.52683.80 ↗
37. Oxidation behavior of TiAl protected by Si-Nb combined ion implantation10.1016/S0966-9795(01)00024-3 ↗
38. Influence of silicon ion implantation and post-implantation annealing on the oxidation behaviour of TiAl under thermal cycle conditions10.1016/S0921-5093(99)00542-0 ↗
39. Influence of implantation of Al, Si, Cr or Mo ions on the oxidation behaviour of TiAl under thermal cycle conditions10.1016/S0921-5093(99)00042-8 ↗
40. Influence of siliconizing on the oxidation behavior of a γ-TiAl based alloy10.1016/S0966-9795(02)00193-0 ↗
41. Effect of silicon and niobium on oxidation resistance of TiAl intermetallics10.1016/0921-5093(92)90256-Z ↗
42. The influence of magnetron-sputtered SiO2 coatings on the cyclic oxidation behavior of γ-TiAl alloy10.2320/matertrans1989.41.1118 ↗
43. A design of self-generated TieAleSi gradient coatings on Ti-6Al-4V alloy based on silicon concentration gradient10.1016/j.jallcom.2020.154670 ↗
44. Oxidation behavior of Ti3AlC2 powders in flowing air10.1039/b203644d ↗
45. The influence of chromium on the oxidation of beta-NiAl at 1000 degrees C10.1002/maco.19960471105 ↗
46. The influence of ternary element addition on the oxidation behaviour of TiAl intermetallic compound in high temperature air10.1016/0010-938X(93)90313-6 ↗
47. Oxidation behavior of TiAl protected by Si+Nb combined ion implantation10.1016/S0966-9795(01)00024-3 ↗
48. High temperature oxidation of titanium-silicon alloys10.1016/S0921-5093(03)00564-1 ↗
49. Microstructure evolution and oxidation resistance of silicon-aluminizing coating on γ-TiAl alloy10.1016/j.apsusc.2015.08.204 ↗
50. Phase equilibria in the α-Ti-Al-Si region of the Ti-Si-Al system10.1007/s11669-004-0110-0 ↗
51. Intermetallic compounds in diffusion couples of Ti with Al-Si eutectic alloy10.1016/S1044-5803(02)00342-X ↗
52. Al+Y co-deposition using EB-PVD method for improvement of high-temperature oxidation resistance of TiAl10.1016/S0257-8972(98)00787-7 ↗
53. A study of aluminum cladding on Ti50Al50 intermetallics by liquid aluminizing10.1016/S0254-0584(97)01892-0 ↗
54. Liquid-phase siliconizing by Al–Si alloys at the surface of a TiAl-based alloy and improvement in oxidation resistance10.1016/j.actamat.2004.02.008 ↗
55. Role of nitrogen on the oxidative stability of Ti5Si3 based alloys at elevated temperature10.1016/j.intermet.2005.09.006 ↗
56. High temperature oxidation behavior of Ti5Si3-based intermetallics10.1016/j.intermet.2008.06.013 ↗
57. The effect of nitrogen on the oxidation of γ-TiAl10.1016/0956-716X(95)00312-J ↗
58. Studies concerning the effect of nitrogen on the oxidation behavior of TiAl-based intermetallics at 900°C10.1007/BF01051039 ↗
59. Beneficial and detrimental effects of nitrogen on the oxidation behaviour of TiAl-based intermetallics10.1002/maco.19970480106 ↗