Structure and electrical behaviors of 0.36BiScO3–0.64PbTiO3 ceramics with overdosing Bi and Pb starting materials

Abstract 0.36BiScO 3 –0.64PbTiO 3 (BS–PT) ceramics are promising materials for high temperature piezoelectric applications. However, the varied performance parameters reported indicate that careful study of the fabrication technique and its influence on the electrical behavior of the resultant BS–PT are necessary. In this paper, two samples of the BS–PT, one with a 1.0 wt% excess of both the starting raw materials Bi 2 O 3 and PbO (BS–PT-I) and the other with a 1.0 wt% excess of PbO (BS–PT-II) were synthesized to address their influence on the sintering behavior, phase evolution and electrical behaviors of the resultant ceramics. It was found that the cell volume of the dominant tetragonal phase of the BS–PT increases slightly with the increase of the sintering temperature. Excess of Bi 2 O 3 and PbO, resulted in phase separation in the resultant BS–PT ceramics. The very large dielectric tunability obtained indicates that the BS–PT has significant potential to be used as tunable capacitors in the elevated temperature range.