Achieving high-efficiency and broad bandwidth with low filler loading for hierarchical Fe3O4/Co-MOF absorbers
Source abstract
Abstract
Metal-organic frameworks (MOFs) with intrinsic porosity and high specific surface area have aroused broad interests as a promising electromagnetic (EM) absorbing material. However, the introduction of magnetic components in MOFs has remained as a formidable obstacle for subsequent development. Herein, Fe3O4/Co-MOF composites were fabricated via a facile and scalable co-precipitation process. The microstructure and morphology of the composites were characterized and the combination of hollow Fe3O4 and Co-MOFs was found to contribute towards the dissipation of incident waves due to the magnetic-dielectric synergistic effect. Impressive microwave absorption ability was obtained with a minimum reflection loss of –56.1 dB over a qualified bandwidth (7.9 GHz) at 2.0 mm. Moreover, the radar cross section simulation further confirmed the effective suppression of radar wave scattering using Fe3O4/Co-MOF composites. This study provides a versatile strategy for designing magnetic-dielectric composites based on MOFs as effective and broadband microwave absorbers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Metamaterials and Metasurfaces Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Two-dimensional SnO/SnO2 heterojunctions for electromagnetic wave absorption10.1016/j.cej.2021.128445 ↗
2. Phase manipulating toward molybdenum disulfide for optimizing electromagnetic wave absorbing in gigahertz10.1002/adfm.202011229 ↗
3. Construction of excellent electromagnetic wave absorber from multi-heterostructure materials derived from ZnCo2O4 and ZIF-67 composite10.1016/j.carbon.2021.09.049 ↗
4. Anemone-shaped ZIF-67@CNTs as effective electromagnetic absorbent covered the whole X-band10.1016/j.carbon.2020.10.055 ↗
5. Filter paper templated one-dimensional NiO/NiCo2O4 microrod with wideband electromagnetic wave absorption capacity10.1016/j.jcis.2020.01.114 ↗
6. Assembling nano-microarchitecture for electromagnetic absorbers and smart devices
7. Synthesis of lightweight N-doped graphene foams with open reticular structure for high-efficiency electromagnetic wave absorption10.1016/j.cej.2019.02.193 ↗
8. Heterostructure tailoring of carbon nanotubes grown on prismatic NiCo clusters for high-efficiency electromagnetic absorption10.1016/j.jcis.2022.12.037 ↗
9. Dielectric loss mechanism in electromagnetic wave absorbing materials10.1002/advs.202105553 ↗
10. Microwave absorption performance of 2D iron-quinoid MOF10.1016/j.cej.2020.126637 ↗
11. Controllable adjustment of cavity of core-shelled Co3O4@NiCo2O4 composites via facile etching and deposition for electromagnetic wave absorption10.1016/j.jcis.2021.03.056 ↗
12. Rational design of CNTs with encapsulated Co nanospheres as superior acid-and base-resistant microwave absorbers10.1039/C8DT02037J ↗
13. Hydrophobic, flexible, and lightweight MXene foams for high-performance electromagnetic-interference shielding10.1002/adma.201702367 ↗
14. Two-dimensional MXenes: from morphological to optical, electric, and magnetic properties and applications10.1016/j.physrep.2019.12.006 ↗
15. Recent advances in the development of Fe3O4-based microwave absorbing materials10.1016/j.ceramint.2019.09.209 ↗
16. Microwave permittivity and permeability experiments in high-loss dielectrics: caution with implicit Fabry-Pérot resonance for negative imaginary permeability10.1063/1.4825378 ↗
17. CoFe2O4/N-doped reduced graphene oxide aerogels for high-performance microwave absorption10.1016/j.cej.2020.124317 ↗
18. A hybrid comprised of porous carbon nanofibers and rGO for efficient electromagnetic wave absorption10.1016/j.carbon.2019.11.004 ↗
19. PVP-assisted transformation of ZIF-67 into cobalt layered double hydroxide/carbon fiber as electromagnetic wave absorber10.1016/j.carbon.2020.11.009 ↗
20. Wheat flour-derived nanoporous carbon@ZnFe2O4 hierarchical composite as an outstanding microwave absorber10.1016/j.carbon.2020.11.006 ↗
21. Metal–organic framework derived magnetic carbon Ni@C octahedron composite as an excellent microwave absorber10.1016/j.coco.2022.101135 ↗
22. Template-free self-assembly of MXene and CoNi-bimetal MOF into intertwined one-dimensional heterostructure and its microwave absorbing properties10.1016/j.cej.2021.130591 ↗
23. MOFs-derived hollow Co/C microspheres with enhanced microwave absorption performance10.1021/acssuschemeng.8b01270 ↗
24. Dramatically enhanced electromagnetic wave absorption of hierarchical CNT/Co/C fiber derived from cotton and metal-organic-framework10.1016/j.carbon.2020.01.073 ↗
25. MOF-derived Co/CoO particles prepared by low temperature reduction for microwave absorption10.1016/j.cej.2020.128378 ↗
26. Constructing macroporous C/Co composites with tunable interfacial polarization toward ultra-broadband microwave absorption10.1016/j.jcis.2021.01.090 ↗
27. Starfish-like C/CoNiO2 heterostructure derived from ZIF-67 with tunable microwave absorption properties10.1016/j.cej.2019.05.040 ↗
28. Laminated and two-dimensional carbon-supported microwave absorbers derived from MXenes10.1021/acsami.7b04602 ↗
29. One-pot hydrothermal synthesis of highly monodisperse water-dispersible hollow magnetic microspheres and construction of photonic crystals10.1016/j.cej.2014.08.051 ↗
30. Tailoring conductive network nanostructures of ZIF-derived cobalt-decorated N-doped graphene/carbon nanotubes for microwave absorption applications10.1016/j.jcis.2021.02.008 ↗
31. Extra-wide bandwidth via complementary exchange resonance and dielectric polarization of sandwiched FeNi@SnO2 nanosheets for electromagnetic wave absorption10.1016/j.jmst.2020.12.083 ↗
32. Photoluminescence of metal-imidazolate complexes with Cd(II), Zn(II), Co(II) and Ni(II) cation nodes and 2-methylimidazole organic linker10.1016/j.jlumin.2018.11.026 ↗
33. Lightweight NiFe2O4-reduced graphene oxideelastomer nanocomposite flexible sheet for electromagnetic interference shielding application10.1016/j.compositesb.2018.11.069 ↗
34. A versatile strategy towards magnetic/dielectric porous heterostructure with confinement effect for lightweight and broadband electromagnetic wave absorption10.1016/j.cej.2019.03.295 ↗
35. Excellent NiO-Ni nanoplate microwave absorber via pinning effect of antiferromagnetic-ferromagnetic interface10.1021/acsami.8b03610 ↗
36. ZnFe2O4 nanospheres decorated residual carbon from coal gasification fine slag as an ultra-thin microwave absorber10.1016/j.fuel.2022.125811 ↗
37. Porous-carbonbased Mo2C nanocomposites as excellent microwave absorber: a new exploration10.1039/C8NR01244J ↗
38. Magnetite hollow microspheres with a broad absorption bandwidth of 11.9 GHz: toward promising lightweight electromagnetic microwave absorption10.1039/C7CP03292G ↗
39. The effect of GO loading on electromagnetic wave absorption properties of Fe3O4/reduced graphene oxide hybrids10.1016/j.ceramint.2017.07.007 ↗
40. Flexible nanocomposites with enhanced microwave absorption properties based on Fe3O4/SiO2 nanorods and polyvinylidene fluoride10.1039/C5TA01924A ↗
41. Fabrication of Fe3O4@SiO2@RGO nanocomposites and their excellent absorption properties with low filler content10.1039/C5RA13315G ↗
42. N-doped residual carbon from coal gasification fine slag decorated with Fe3O4 nanoparticles for electromagnetic wave absorption10.1016/j.jmst.2021.06.052 ↗
43. Synthesis and characterization of Fe3O4/polypyrrole/carbon nanotube composites with tunable microwave absorption properties: role of carbon nanotube and polypyrrole content10.1016/j.cej.2015.10.031 ↗
44. Honeycomb-like Co/C composites derived from hierarchically nanoporous ZIF-67 as a lightweight and highly efficient microwave absorber10.1016/j.compositesb.2019.02.054 ↗
45. Bead-like cobalt nanoparticles coated with dielectric SiO2 and carbon shells for high-performance microwave absorber10.1016/j.jcis.2020.05.106 ↗
46. Boosting dual-interfacial polarization by decorating hydrophobic graphene with high-crystalline core-shell FeCo@Fe3O4 nanoparticle for improved microwave absorption10.1016/j.carbon.2021.10.053 ↗
47. Electromagnetic absorption enhancing mechanisms by modified biochar derived from Enteromorpha prolifera: a combined experimental and simulation study10.1039/D2NR04162F ↗
48. Optimizing impedance matching by a dual-carbon Co-regulation strategy of Co3O4@rGO/celery stalks derived carbon composites for excellent microwave absorption10.1016/j.jmst.2022.05.058 ↗
49. 3D nest-like architecture of core-shell CoFe2O4@1T/2H-MoS2 composites with tunable microwave absorption performance10.1021/acsami.9b23489 ↗
50. Ultra-small Co/CNTs nanohybrid from metal organic framework with highly efficient microwave absorption10.1016/j.compositesb.2018.08.109 ↗
51. A novel hierarchically porous magnetic carbon derived from biomass for strong lightweight microwave absorption10.1016/j.carbon.2018.10.027 ↗
52. Biomass‑derived carbon heterostructures enable environmentally adaptive wideband electromagnetic wave absorbers10.1007/s40820-021-00750-z ↗