Characterization of spark plasma sintered TiN nanoparticle strengthened titanium alloy using EBSD and TKD
Source abstract
Abstract
Abstract Spark plasma sintering is one of the best fabrication techniques for producing products with little grain growth and control of microstructures. Ti6Al4V alloy strengthened with 4 vol.% TiN was produced by spark plasma sintering method. In this study, the influence of nanoparticle ceramic addition, dispersion behaviour and interfaces reaction existence on the sintered titanium matrix composite were investigated. The microstructural characterization of the sintered composite was analyzed using scanning electron microscopy (FE-SEM) with an attachment of electron backscatter diffraction (EBSD), transmission Kikuchi diffraction (TKD) and X-ray diffraction (XRD) technique for phases identification. The results show that TiN nanoparticle was evenly dispersed in the sintered composite which resulted in the formation of grains with changes in crystallographic orientations after the addition of nanoparticle material. Moreover, the TKD attempt has been made to reveal TiN interface sub-grains structures formed at the grain boundary during the process of spark plasma sintering.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
2. Schaffer · 1999
3. Effect of powder mixture conditions on mechanical properties of sintered Al 2 O 3-SS 316L composites under vacuum atmosphere
4. Titanium-based matrix composites reinforced with particulate, microstructure, and mechanical properties using spark plasma sintering technique: a review
5. Evaluation the properties of titanium matrix composites by melting route synthesis
6. CermeTi® discontinuously reinforced Ti-matrix composites: manufacturing, properties, and applications10.1007/s11837-004-0126-2 ↗
7. Processing of titanium–titanium boride dual matrix composites10.1016/j.jmatprotec.2007.05.047 ↗
8. In situ reaction synthesis of Ti–TiB composites containing high volume fraction of TiB by spark plasma sintering process10.1016/j.jallcom.2010.04.218 ↗
9. Microstructures and mechanical properties of the in situ TiB–Ti metal–matrix composites synthesized by spark plasma sintering process10.1016/j.jallcom.2011.05.017 ↗
10. Spark plasma sintering behaviour of commercially pure titanium micro-alloyed with Ta-Ru
11. Spark plasma sintering of metals and metal matrix nanocomposites: a review10.1155/2012/983470 ↗
12. Influence of spark plasma sintering on microstructure and wear behaviour of Ti-6Al-4V reinforced with nanosized TiN10.1016/S1003-6326(18)64637-0 ↗
13. Effect of TiB2 content on the characteristics of spark plasma sintered Ti–TiBw composites10.1016/j.apt.2017.03.028 ↗
14. Nanoindentation studies on TiN nanoceramic reinforced Ti–6Al–4V matrix composite10.1016/j.ceramint.2017.12.042 ↗
15. The effect of electric field and pressure on the synthesis and consolidation of materials: a review of the spark plasma sintering method10.1007/s10853-006-6555-2 ↗
16. Electric current activated/assisted sintering (ECAS): a review of patents 1906–200810.1088/1468-6996/10/5/053001 ↗
17. Titanium’99: science and technology
18. Characterization of titanium alloy Ti-6Al-4V for chemical, marine and industrial applications10.1016/j.matchar.2003.10.006 ↗
19. The influence of glow discharge nitriding, oxynitriding and carbonitriding on surface modification of Ti–1Al–1Mn titanium alloy10.1016/S0042-207X(01)00373-6 ↗
20. Colangelo · 1987
21. The effect of microstructure on the mechanical properties of two-phase titanium alloys10.1016/S0924-0136(02)00248-0 ↗
22. A study of the microstructure and hardness of two titanium alloys: commercially pure and Ti–6Al–4V10.1016/j.jallcom.2009.06.172 ↗
23. Effect of sintering parameters on densification and microstructural evolution of nano-sized titanium nitride reinforced titanium alloys10.1016/j.jallcom.2017.11.140 ↗
24. Synthesis and consolidation of TiN/TiB2 ceramic composites via reactive spark plasma sintering10.1016/j.jallcom.2010.10.198 ↗
25. Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methods10.1016/j.surfcoat.2004.07.115 ↗
26. Optimization of process parameters for spark plasma sintering of nano structured SAF 2205 composite10.1016/j.jmrt.2017.03.004 ↗
27. Effect of TiN and TiCN additions on spark plasma sintered Ti–6Al–4V
28. Introduction and comparison of new EBSD post-processing methodologies10.1016/j.ultramic.2015.08.001 ↗
29. Densification and grain boundary nitrides in spark plasma sintered SAF 2205-TiN composite10.1016/j.ijrmhm.2019.02.021 ↗