Electrochemical surface treatment of manganese stainless steel using several types of deep eutectic solvents
Source abstract
Abstract
Abstract The use of deep eutectic solvents in the electrochemical treatment of the surfaces of manganese stainless steel has been demonstrated for the first time. The comparative characteristics of Ethaline, Glyceline and Reline, choline chloride based deep eutectic solvents, are examined in this work. It is proved that the process of anodic treatment of the manganese stainless steel in these electrolytes takes place under diffusion control and is characterized by selective dissolution of Fe. Moreover, it was shown that the anodic processing mechanism for Mn-containing stainless steel does not differ between electrolytes. At the same time, however, it was found that the process of anodic dissolution of stainless steel in Ethaline, Glyceline and Reline proceeds at noticeably different rates, due to the different physicochemical properties of these electrolytes. Special attention was paid to the surface characterization of stainless steel samples electropolished in Ethaline, Glyceline and Reline.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ionic liquids properties and applications · Electrochemical Analysis and Applications · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. A review of worldwide developments in stainless steels10.1016/0261-3069(86)90001-4 ↗
2. Stainless steels in architecture, building and construction
3. The effect of surface roughness on the adhesion of elastic plates with application to biological systems10.1063/1.1621854 ↗
4. Surface “Roughness” effect on marine immersion corrosion of mild steel10.5006/1.3287847 ↗
5. The effect of creep cavitation on the fatigue life under creep-fatigue interaction10.1016/0029-5493(95)90013-6 ↗
6. Electropolishing of AISI-304 stainless steel for protection against SRB biofilm10.1016/j.surfcoat.2011.11.046 ↗
7. Machining characteristics of the electropolishing of stainless steel (STS316L)10.1007/s001700070049 ↗
8. The effects of electropolishing (EP) process parameters on corrosion resistance of 316L stainless steel10.1016/S0924-0136(03)00785-4 ↗
9. Gabe · 1994 · vol. 11 · 39
10. Wilson · 1971 · 791
11. The effects of parametric changes in electropolishing process on surface properties of 316L stainless steel10.1016/j.apsusc.2017.03.081 ↗
12. Obtaining tailored surface characteristics by combining shot peening and electropolishing on 316L stainless steel10.1016/j.apsusc.2019.06.042 ↗
13. Effect of electropolishing on corrosion of nuclear grade 316L stainless steel in deaerated high temperature water10.1016/j.corsci.2016.09.002 ↗
14. Improving the oxidation resistance of 316L stainless steel in simulated pressurized water reactor primary water by electropolishing treatment10.1016/j.jnucmat.2015.09.029 ↗
15. Electropolishing of AISI-304 stainless steel using an oxidizing solution originally used for electrochemical coloration10.1016/j.electacta.2004.11.007 ↗
16. Electropolishing of 304 stainless steel: Surface roughness control using experimental design strategies and a summarized electropolishing model10.1016/j.electacta.2007.11.075 ↗
17. Electropolishing of 304 stainless steel: Interactive effects of glycerol content, bath temperature, and current density on surface roughness and morphology10.1016/j.surfcoat.2009.08.005 ↗
18. High-current-density electropolishing (HDEP) of AISI 316L (EN 1.4404) stainless steel
19. Impact of electrolyte concentration on surface gloss in electropolished stainless steel10.1016/j.promfg.2017.09.140 ↗
20. The electrochemical stability of ionic liquids and deep eutectic solvents10.1007/s11426-016-5566-3 ↗
21. Deep eutectic solvents: syntheses, properties and applications10.1039/c2cs35178a ↗
22. Deep eutectic solvents (DESs) and their applications10.1021/cr300162p ↗
23. Natural deep eutectic solvents - solvents for the 21st century10.1021/sc500096j ↗
24. Electrochemical synthesis of conducting polymers involving deep eutectic solvents10.2174/1573413715666190206145036 ↗
25. The influence of various factors on corrosion of mild steel in deep eutectic solvents10.1016/j.matpr.2018.10.099 ↗
26. Electrodeposition of Nanocrystalline Nickel Coatings from a Deep Eutectic Solvent with Water Addition10.1134/S2070205118010203 ↗
27. Electrodeposition of Ni–TiO2 Composite Coatings Using Electrolyte Based on a Deep Eutectic Solvent10.3103/S106837551902008X ↗
28. Application of a deep eutectic solvent to prepare nanocrystalline Ni and Ni/TiO2 coatings as electrocatalysts for the hydrogen evolution reaction10.1016/j.ijhydene.2019.07.188 ↗
29. Kinetics of Cr(III) ions discharge in solutions based on a deep eutectic solvent (ethaline): effect of water addition10.1016/j.jelechem.2020.114086 ↗
30. Electrochemical behavior and electrodeposition of Ni-Co alloy from choline chloride-ethylene glycol deep eutectic solvent10.1016/j.apsusc.2019.144889 ↗
31. Nanoscale electropolishing of high-purity silver with a deep eutectic solvent10.1016/j.colsurfa.2016.09.013 ↗
32. Electropolishing of nickel and cobalt in deep eutectic solvents10.1080/00202967.2018.1470400 ↗
33. Enhancing corrosion resistance of nickel surface by electropolishing in a deep eutectic solvent10.1016/j.matlet.2020.127719 ↗
34. Electropolishing of aluminium in a deep eutectic solvent10.1016/j.surfcoat.2019.07.018 ↗
35. The effect of electropolishing in a deep eutectic solvent (Ethaline) on the surface properties and corrosion resistance of aluminium-magnesium alloy10.32434/0321-4095-2020-131-4-66-71 ↗
36. Electropolishing of two kinds of bronze in a deep eutectic solvent (Ethaline)10.1016/j.surfcoat.2020.126060 ↗
37. Electropolishing of pure metallic titanium in a deep eutectic solvent10.1016/j.arabjc.2020.11.012 ↗
38. Electropolishing of WCu composite in a deep eutectic solvent10.1007/s11696-020-01426-5 ↗
39. Voltammetric and impedance studies of the electropolishing of type 316 stainless steel in a choline chloride based ionic liquid10.1016/j.electacta.2005.12.030 ↗
40. Electropolishing of Stainless Steels in a Choline Chloride Based Ionic Liquid: An Electrochemical Study with Surface Characterisation Using SEM and Atomic Force Microscopy
41. Electropolishing of re-melted SLM stainless steel 316L parts using deep eutectic solvents: 3×3 full factorial design10.1007/s11665-016-2140-2 ↗
42. Electrochemical Surface Treatment to Enhance Corrosion Resistance and Bioresistance of Medical-Grade Stainless Steels10.1007/s11665-020-05095-z ↗
43. Kinetics and mechanism of corrosion of mild steel in new types of ionic liquids10.1016/j.jelechem.2018.06.018 ↗
44. The influence of various factors on corrosion of mild steel in deep eutectic solvents10.1016/j.matpr.2018.10.099 ↗
45. The peculiar effect of water on ionic liquids and deep eutectic solvents10.1039/C8CS00325D ↗
46. Deep eutectic solvents: physicochemical properties and gas separation applications10.1021/ef5028873 ↗
47. Design of improved deep eutectic solvents using hole theory10.1002/cphc.200500489 ↗
48. Glycerol eutectics as sustainable solvent systems10.1039/C0GC00395F ↗
49. Anodic dissolution of metals in ionic liquids10.1016/j.pnsc.2015.11.005 ↗
50. Characterisation and application of the Fe(II)/Fe(III) redox reaction in an ionic liquid analogue10.1016/j.electacta.2013.08.013 ↗
51. Viscosity of aqueous ionic liquids analogues as a function of water content and temperature10.1016/j.cjche.2017.09.008 ↗