journal article·2018-04

Strong photoluminescence emission at low dopant amount in YAG:Ce and YAG:Eu phosphors

Mario Borlaf, Malgorzata Frankowska, Wladyslaw W. Kubiak, Thomas Graule

Publisher page

Abstract

Abstract YAG:Ce and YAG:Eu phosphors have been prepared by solid state reaction. The use of submicrometric powders allows preparing pellets with high density, enhancing the photoluminescence (PL) properties. Pellets were prepared by uniaxial pressing and the influence of the thermal treatment on the microstructural and optical properties were also studied. Pure YAG phase was obtained at 1400 °C during 1 h and high density pellets (97%) after sintering at 1600 °C for 10 h. The highest PL emission was achieved for the sintered YAG:Ce and YAG:Eu pellets doped with low dopant concentrations (0.01 mol% for Ce and 0.1 mol% for Eu). Finally, increasing the Ce and Eu concentration the PL intensity decreases and the dopants occupy different positions than the Y one in the YAG lattice.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Radiation Detection and Scintillator Technologies · Luminescence and Fluorescent Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. New developments in the field of luminescent materials for lighting and displays10.1002/(SICI)1521-3773(19981204)37:22<3084::AID-ANIE3084>3.0.CO;2-W ↗
2. Advances in transparent glass–ceramic phosphors for white light-emitting diodes—a review10.1016/j.jeurceramsoc.2014.10.002 ↗
3. Low temperature synthesis and luminescence investigations of YAG:Ce, Eu nanocomposite powder for warm white light-emitting diode10.1016/j.solidstatesciences.2013.11.007 ↗
4. Inorganic luminescent materials: 100 years of research and application10.1002/adfm.200301005 ↗
5. Solid-state reactive sintering of transparent polycrystalline Nd:YAG ceramics10.1111/j.1551-2916.2006.01051.x ↗
6. On the relationship between emission color and Ce3+ concentration in garnet phosphors10.1016/j.optmat.2006.08.010 ↗
7. Fabrication of Ce:YAG, Ce,Cr:YAG and Ce:YAG/Ce,Cr:YAG dual-layered composite phosphor ceramics for the application of white LEDs10.1016/j.ceramint.2013.12.034 ↗
8. Transparent Ce:Y3Al5O12 ceramic phosphors for white light-emitting diodes10.1063/1.4742896 ↗
9. Preparation and properties of transparent Eu:YAG fluorescent ceramics with different doping concentrations
10. Photoluminescence investigations of YAG:Eu nanocomposite powder by high-energy ball milling10.1016/j.cap.2008.12.035 ↗
11. Fabrication of far red emission phosphors Y3Al5O12:Eu(YAG:Eu) by co-precipitation method10.1007/s11664-016-4379-7 ↗
12. Sol-gel based YAG:Ce3+ powders for applications in LED devices
13. Citrate sol-gel combustion preparation and photoluminescence properties of YAG:Ce phosphors10.1016/S1002-0721(12)60040-4 ↗
14. Hydrolysis and complexation of N,N-dimethylformamide in new nanostructured titanium oxide hybrid organic-inorganic sols and gel10.1021/jp201864g ↗
15. Synthesis of YAG phosphor particles with excellent morphology by solid state reaction10.1016/j.jcrysgro.2012.12.022 ↗
16. Luminescence properties of YAG:Ce3+ nanophosphors prepared by flame spray pyrolysis10.1149/1.3211177 ↗
17. Yttrium aluminum garnet nanopowders produced by liquid-feed flame spray pyrolysis (LF-FSP) of metalloorganic precursors10.1021/cm021783l ↗
18. Synthesis and photoluminescence properties of YAG:Ce3+ phosphor using a liquid-phase precursor method10.1016/j.jlumin.2013.10.006 ↗
19. Synthesis and luminescence properties of YAG:Ce nanopowder prepared by the Pechini method10.1016/j.apt.2011.04.006 ↗
20. A protected annealing strategy to enhanced light emission and photostability of YAG:Ce nanoparticle-based films10.1039/c0nr01000f ↗
21. Deep submicrometer YAG:Ce phosphor particles with high photoluminescent quantum yield prepared by flame spray synthesis10.1111/jace.14905 ↗
22. Correlation between structure and optical properties in (Y,Lu)3Al5O12:Ce3+ solid solutions10.1088/0022-3727/49/41/415101 ↗
23. Europium–enabled luminescent single crystal and bulk YAG and YGG for optical imaging10.1016/j.optmat.2016.08.032 ↗
24. Effect of the aluminum source on the formation of yttrium aluminum garnet (YAG) powder via solid state reaction10.1016/j.jallcom.2007.01.148 ↗
25. Influence of ionic mobility on the phase transformation route in Y3Al5O12 (YAG) stoichiometry10.1016/j.jeurceramsoc.2011.04.038 ↗
26. Particle size effects on yttrium aluminum garnet (YAG) phase formation by solid-state reaction10.1557/jmr.2014.224 ↗
27. The effect of powders homogenisation conditions on the synthesis of yttrium aluminium garnet (YAG) by a solid-state reaction10.1016/j.ceramint.2016.11.142 ↗
28. Fabrication and optical properties of high-performance polycrystalline Nd:YAG ceramics for solid-state lasers10.1111/j.1151-2916.1995.tb08433.x ↗
29. Sintering kinetics of YAG ceramics10.1016/S1002-0721(14)60087-9 ↗
30. Sol–gel derived flux assisted synthesis of fine particles YAG:Ce3+ phosphor for remote phosphor converted white light emitting diodes10.1016/j.materresbull.2015.10.057 ↗
31. A flux-free method for synthesis of Ce3+-doped YAG phosphor for white LEDs, mater10.1016/j.materresbull.2015.10.046 ↗
32. Pore stability during the sintering of TiO2
33. German · 1996
34. The densification and microstructure of calcium titanate
35. Optical enhancement brought by doping Gd3+ ions into Ce:YAG ceramics for indoor white light-emitting diodes10.1364/OE.23.00A292 ↗
36. Characterization of spray granulated Nd:YAG particles for transparent ceramics10.1016/j.jallcom.2015.02.229 ↗
37. Temperature quenching of yellow Ce3+ luminescence in YAG:Ce10.1021/cm8030768 ↗
38. Effects of local structure of Ce3+ ions on luminescent properties of Y3Al5O12:Ce nanoparticles10.1038/srep22238 ↗
39. A new phosphor for flying-spot cathod-raytubes for color television: yellow-emitting Y3Al5O12-Ce3+10.1063/1.1755025 ↗
40. Investigation of some Ce3+-activated phosphors10.1063/1.1701771 ↗
41. Measurement of excited-state-absorption loss for Ce3+ in Y3Al5O12 and implications for tunable 5d→4f rare-earth lasers10.1063/1.90395 ↗
42. Interpretation of europium (III) spectra10.1016/j.ccr.2015.02.015 ↗
43. Effect of the europium doping on the structural and luminescent properties of yttrium aluminum garnet10.1016/j.mseb.2012.11.018 ↗
44. The synthesis and optical property of solid-state-prepared YAG:Ce phosphor by a spray-drying method10.1016/j.materresbull.2008.10.006 ↗
45. Long-lasting phosphorescence study on Y3Al5O12 doped with different concentrations of Ce3+10.1016/S1002-0721(10)60473-5 ↗