Hydrothermal synthesis and luminescent properties of BaTiF 6 :Mn 4+ red phosphor for LED backlighting
Source abstract
Abstract
Abstract The red-emitting phosphors BaTiF 6 :Mn 4+ (denoted as BTFM) have been synthesized from HF, H 2 TiF 6 , Ba(OH) 2 and KMnO 4 mixed solution using a hydrothermal route. Their structure, composition and morphology were investigated. The photo-luminescent (PL) properties of the obtained BTFM products have been investigated, which exhibit broad excitation band in the blue region and sharp emission in the red region. In order to obtain the optimum BTFM red phosphor, many important factors of hydrothermal synthesis have been studied. The single red LED fabricated by combining BTFM with GaN chip shows intense red emission with the appropriate CIE chromaticity coordinates ( x = 0.660, y = 0.312), and bright red light can be observed from the red LED. Therefore, this red phosphor may finds application in blue LED backlighting.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Gas Sensing Nanomaterials and Sensors · Radiation Detection and Scintillator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Wide-band excited Y6(WMo)0.5O12:Eu red phosphor for white light emitting diode: structure evolution, photoluminescence properties, and energy transfer mechanisms involved10.1021/ic401453e ↗
2. Recent Developments in the Field of Inorganic Phosphors10.1002/anie.200804005 ↗
3. Near-ultraviolet excitable orange–yellow Sr3Al2O5Cl2:Eu2+ phosphor for potential application in light-emitting diodes10.1063/1.2996278 ↗
4. White LED phosphors: the next step10.1117/12.843536 ↗
5. Yellow-ring measurement of white LED in various lighting environments10.1007/s10043-013-0042-1 ↗
6. Methods to improve the fluorescence intensity of CaS:Eu2+ red-emitting phosphor for white LED10.1016/j.mseb.2006.03.008 ↗
7. Hydrothermal preparation and persistence characteristics of nano-sized phosphor SrS:Eu2+, Dy3+10.1016/S1002-0721(08)60187-8 ↗
8. Controlled peak wavelength shift of Ca1−xSrx(SySe1-y):Eu2+ phosphor for LED application10.1016/j.jssc.2006.04.032 ↗
9. Synthesis of a multinary nitride Eu-doped CaAlSiN3 from alloy at low temperatures10.1021/cm071612m ↗
10. Temperature and wavelength dependent trap filling in M2Si5N8:Eu (M=Ca, Sr Ba) persistent phosphor10.1016/j.jlumin.2011.10.022 ↗
11. the effect of zinc acetate dihydrate on morphology and luminescence properties of CaSi2O2N2:Eu2+ phosphor10.1111/jace.12314 ↗
12. Highly efficient non-rare-earth red emitting phosphor for warm white light-emitting diodes10.1038/ncomms5312 ↗
13. Temperature-dependent photoluminescence properties of deep-red emitting Mn4+-activated magnesium fluorogermanate phosphors10.1016/j.jallcom.2012.11.078 ↗
14. Mn-activated Na2SiF6 red and yellowish-green phosphors: a comparative study10.1063/1.3639298 ↗
15. Photoluminescence and Raman scattering spectroscopies of BaSiF6:Mn4+ red phosphor10.1063/1.4803880 ↗
16. Synthesis of Na2SiF6:Mn4+ red phosphors for white LED applications by co-precipitation10.1039/C4TC02062F ↗
17. Application of red light-emitting diodes using Mg3.5Ge1.25O6:Mn4+ phosphor10.1016/j.matlet.2013.08.098 ↗
18. Synthesis of narrow-band red-emitting K2SiF6:Mn4+ phosphors for a deep red monochromatic LED and ultrahigh color quality warm-white LEDs10.1039/C4TC02042A ↗
19. Hydrothermal synthesis and photoluminescence properties of red phosphor BaSiF6:Mn4+ for LED applications10.1039/c3tc31878h ↗
20. A red phosphor BaTiF6:Mn4+: reaction mechanism, microstructures, optical properties, and applications for white LEDs10.1039/C4DT00781F ↗
21. Synthesis and Optical Properties of BaTiF6:Mn4+ Red Phosphor10.1149/2.025404jss ↗
22. Photoluminescent properties of cubic K2MnF6 particles synthesized in metal immersed HF/KMnO4 solutions10.1063/1.3516489 ↗
23. Geometry of the 4Tg Excited State in Cs2SiF6:Mn4+10.12693/APhysPolA.112.829 ↗