journal article·2024-01Open access

Effect of dopant on ion-dynamics of sodium ion-based flexible polyblend electrolyte for electrochemical device application

Vipin Cyriac, Ismayil, Y.N. Sudhakar, Kuldeep Mishra, Z.E. Rojudi, M.S. Murari, I.M. Noor

Abstract

This work examines the impact of NaNO3 salt on a NaAlg: PVA blend polymer, focusing on charge carrier properties, such as number density (n), mobility (μ), and diffusion coefficient (D). It is found that the addition of NaNO3 increased the room temperature conductivity from (6.12±0.15) × 10−8 S cm−1 (PNN0, salt-free) to (6.50±0.03) × 10−6 S cm−1 (PNN15, 15 wt. NaNO3), influenced by increasing n compared to µ. Temperature-dependent conductivity revealed a significant influence of both n and μ on electrolyte conductivity, and the ion dynamics were explored using various formalisms. XRD studies showed reduced crystallinity owing to the interaction of Na+ and NO3− with -OH groups, as confirmed by IR spectroscopy. Scanning electron microscopy confirmed salt deposits at higher concentrations. However, sufficient mechanical strength was observed for the optimally conducting sample. Obtained results showed the potential applications of the sample in electrochemical devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Conducting polymers and applications · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. Complexes of alkali metal ions with poly(ethylene oxide)10.1016/0032-3861(73)90146-8 ↗
2. Polymer electrolytes for sodium-ion batteries10.1016/j.ensm.2020.11.030 ↗
3. Impact of charge carrier transport properties on conductivity-temperature dependence of gellan gum-LiCF3SO3 biopolymer electrolyte10.1177/09540083221102743 ↗
4. Plant-based materials and transitioning to a circular economy10.1016/j.spc.2019.04.007 ↗
5. Polyionic hydrocolloids for the intestinal delivery of protein drugs: alginate and chitosan — a review10.1016/j.jconrel.2006.04.017 ↗
6. Surface modification of graphene oxide nanosheets by protamine sulfate/sodium alginate for anti-cancer drug delivery application10.1016/j.apsusc.2018.01.175 ↗
7. Substantial ion conduction in the biopolymer membrane: efficacy of NaI on sodium alginate matrix10.1016/j.matlet.2022.131652 ↗
8. Investigations on Na-ion conducting electrolyte based on sodium alginate biopolymer for all-solid-state sodium-ion batteries10.1007/s10008-021-04985-z ↗
10. N.M. Ghazali, N.F. Mazuki, A.S. Samsudin, Characterization of biopolymer Blend-based on alginate and Poly(vinyl Alcohol) as an application for polymer host in polymer electrolyte, Materials Today: Proceedings, Volume 48, Part 4, 2022, Pages 849-853, ISSN 2214-7853, 10.1016/j.matpr.2021.02.401.10.1016/j.matpr.2021.02.401 ↗
11. Tuncer Çaykara & Serkan Demirci (2006) Preparation and Characterization of Blend Films of Poly(Vinyl Alcohol) and Sodium Alginate, Journal of Macromolecular Science, Part A, 43:7, 1113-1121, DOI: 10.1080/10601320600740389.10.1080/10601320600740389 ↗
12. Preparation and characterization of poly(vinyl alcohol)/sodium alginate blended membrane for alkaline solid polymer electrolytes membrane10.1016/j.memsci.2014.01.034 ↗
13. Study of electrospinning of sodium alginate, blended solutions of sodium alginate/poly(vinyl alcohol) and sodium alginate/poly(ethylene oxide)10.1002/app.25696 ↗
14. Ionic conductivity and free volume related microstructural properties of LiClO4/PVA/NaAlg polymer composites: positron annihilation spectroscopic studies10.1016/j.jnoncrysol.2016.10.010 ↗
15. Preparation and characterization of NaClO4 doped poly(vinyl alcohol)/sodium alginate composite electrolyte10.1063/1.4791531 ↗
16. Sheela, T., et al. "Ionic conductivity studies in crystalline PVA/NaAlg polymer blend electrolyte doped with alkali salt KCl." AIP Conference Proceedings. Vol. 1591. No. 1. American Institute of Physics, 2014. 10.1063/1.4872544.10.1063/1.4872544 ↗
17. Investigations on Al2O3 dispersed PEO/PVP based Na+ ion conducting blend polymer electrolytes10.1007/s10854-021-05658-3 ↗
18. Dielectric relaxations and transport properties parameter analysis of novel blended solid polymer electrolyte for sodium-ion rechargeable batteries10.1007/s10853-019-03381-3 ↗
19. Ion-conducting polymer electrolyte based on poly (ethylene oxide) complexed with NaNO3 salt-application as an electrochemical cell10.1016/S0378-7753(99)00051-8 ↗
20. High performance of the sodium-ion conducting flexible polymer blend composite electrolytes for electrochemical double-layer supercapacitor applications10.1002/est2.345 ↗
21. Enhancement on amorphous phase in solid biopolymer electrolyte based alginate doped NH4NO310.1007/s11581-018-2667-3 ↗
22. S. Zhang, H. Dandan, D. Zongxian, W. Xin, Z. Dan, H.U. Yan, X. Xincai, Fabrication and characterization of one interpenetrating network hydrogel based on sodium alginate and polyvinyl alcohol, (n.d.).(2023) 10.1007/s11595-019-2112-0.
23. Development and modification of PVA–alginate as a suitable immobilization matrix10.1016/j.procbio.2011.08.010 ↗
24. Investigations on anomalous behavior of ionic conductivity in NaPF6 salt loaded hydroxyethyl cellulose biodegradable polymer electrolyte for energy storage applications10.1002/pat.6004 ↗
25. Modification in the microstructure of sodium carboxymethylcellulose/polyvinyl alcohol polyblend films through the incorporation of NaNO3 for energy storage applications10.1002/er.8588 ↗
26. XPS analysis during phosphate, nitrate and Cr(VI) removal by amine cross-linking biosorbent10.1016/j.jcis.2016.01.079 ↗
27. Infrared spectra of inorganic aerosols: ab initio study of (NH 4)2SO4, NH4NO3, and NaNO310.1139/cjp-2013-0367 ↗
28. Thermal decomposition of cobalt nitrato compounds: preparation of anhydrous cobalt(II)nitrate and its characterisation by Infrared and Raman spectra10.1016/j.tca.2005.04.010 ↗
29. Water absorption and states of water in semicrystalline poly(vinyl alcohol) films10.1016/0032-3861(96)81134-7 ↗
30. FITYK – peak-fitting software with support for powder patterns analysis10.1107/S010876730409511X ↗
31. Improved cellulose X-ray diffraction analysis using Fourier series modeling10.1007/s10570-020-03177-8 ↗
32. Effect of low concentrations of SiO2 nanoparticles on the physical and chemical properties of sodium alginate-based films10.1016/j.carbpol.2021.118286 ↗
33. Electrical and Optical Properties of Polyvinyl Alcohol Thin Films Doped with Metal Salts
34. Poly(vinyl alcohol)–LiBOB complexes for lithium–air cells10.1016/j.electacta.2013.04.010 ↗
35. A conceptual review on polymer electrolytes and ion transport models10.1016/j.jsamd.2018.01.002 ↗
36. Calculation of activation energy of ionic conductivity in silica glasses by classical methods10.1111/j.1151-2916.1954.tb13991.x ↗
37. Studies on ammonuim perchlorate doped polyethylene oxide polymer electrolyte10.1016/0167-2738(90)90090-E ↗
38. Proton conducting polymer electrolyte: II poly ethylene oxide + NH4l system10.1007/BF00576285 ↗
39. Observation of ionic conductivity on PUA-TBAI-I2 gel polymer electrolyte10.1038/s41598-021-03965-7 ↗
40. Dielectric behaviour and AC conductivity of LiCF3so3 doped H-chitosan polymer films10.1007/BF02382816 ↗
41. Discussion on the influence of DES content in CA-based polymer electrolytes10.1007/s10853-011-5964-z ↗
42. Ion-transport study in nanocomposite solid polymer electrolytes based on chitosan: electrical and dielectric analysis10.1002/app.41774 ↗
43. Debye and non-Debye relaxation10.1088/0022-3719/18/19/021 ↗
44. Impedance and ionic transport properties of proton-conducting electrolytes based on polyethylene oxide/methylcellulose blend polymers10.1016/j.jsamd.2020.02.001 ↗
45. A method based on impedance spectroscopy to determine transport properties of polymer electrolytes10.1039/C3CP53830C ↗
46. Preparation and characterization of GG-LiCF3SO3-DMSO gel polymer electrolyte for potential lithium-ion battery application10.15377/2409-5826.2022.09.6 ↗
47. Tuning the ionic conductivity of flexible polyvinyl alcohol/sodium bromide polymer electrolyte films by incorporating silver nanoparticles for energy storage device applications10.1002/app.52525 ↗
48. Influence of charge carrier density, mobility and diffusivity on conductivity–temperature dependence in polyethylene oxide–based gel polymer electrolytes10.1177/09540083211052841 ↗
49. Ion dynamics and relaxation behavior of NaPF6-doped polymer electrolyte systems10.1007/s10008-016-3147-1 ↗
50. AC conductivity and dielectric behavior of CoAlxFe 2-xO410.1016/j.solidstatesciences.2003.10.006 ↗
51. Dynamics of mobile ions in crystals, glasses and melts10.1016/S0167-2738(97)00465-7 ↗
52. Dielectric properties and ion transport studies from Trukhan, EIS, and Bandara-Mellander approaches for plasticized sodium ion conducting polymer blend electrolytes10.1007/s11581-023-04933-z ↗
53. Solid polymer electrolytes based on polyethylene oxide and lithium trifluoro- methane sulfonate (PEO–LiCF3SO3): ionic conductivity and dielectric relaxation10.1016/j.ssi.2008.04.034 ↗
54. Ionic conductivity enhancement of PVA: carboxymethyl cellulose poly-blend electrolyte films through the doping of NaI salt10.1007/s10570-022-04483-z ↗
55. Cellulose-based novel hybrid polymer electrolytes for green and efficient Na-ion batteries10.1016/j.electacta.2015.05.178 ↗
56. Investigation of novel alginate−magnesium aluminum silicate microcomposite films for modified-release tablets10.1016/j.jconrel.2005.07.003 ↗
57. Thermal behavior of alginic acid and its sodium salt10.26850/1678-4618eqj.v29.2.2004.p57-63 ↗
58. Effect of K+ ion doping on structural and physical properties of PVA/MAA:EA polymer blend electrolytes
59. Effects of CdCl2 concentration on the structural, thermal and ionic conductivity properties of HPMC polymer electrolyte films10.1007/s11581-014-1151-y ↗
60. Effect of lithium salt concentrations on blended 49% poly(methyl methacrylate) grafted natural rubber and poly(methyl methacrylate) based solid polymer electrolyte10.1016/j.electacta.2011.06.015 ↗
61. Porous sulfurized poly(acrylonitrile) nanofiber as a long-life and high-capacity cathode for lithium–sulfur batteries10.1016/j.jallcom.2020.158445 ↗
62. Studies on biodegradable polymer electrolyte rice starch (RS) complexed with lithium iodide10.1007/s11581-013-1031-x ↗
63. Spectroscopic and electrochemical properties of PVP based polymer electrolyte films10.1007/s00289-017-2229-2 ↗
64. Preparation and dielectric properties of PVP-based polymer electrolyte films for solid-state battery application10.1007/s00289-017-2072-5 ↗
65. Preparation and investigation of solid polymer electrolyte based on novel polyamide elastomer/metal salt10.1007/s13233-017-5094-9 ↗
66. Sodium-ion batteries: present and future10.1039/C6CS00776G ↗
67. Ionic conductivity and battery characteristic studies of a new PAN-based Na+ ion conducting gel polymer electrolyte system10.1007/s12648-015-0758-9 ↗
68. Compatible solid polymer electrolyte based on methyl cellulose for energy storage application: structural, electrical, and electrochemical properties10.3390/polym12102257 ↗
69. Pathways for practical high-energy long-cycling lithium metal batteries10.1038/s41560-019-0338-x ↗
70. Enabling room temperature sodium metal batteries10.1016/j.nanoen.2016.09.013 ↗
71. Natural, biodegradable and flexible egg shell membranes as separators for lithium-ion batteries10.1039/C4RA08491H ↗
72. Composite of a nonwoven fabric with poly(vinylidene fluoride) as a gel membrane of high safety for lithium ion battery10.1039/C2EE23564A ↗
73. A porous gel-type composite membrane reinforced by nonwoven: promising polymer electrolyte with high performance for sodium ion batteries10.1016/j.electacta.2016.12.030 ↗
74. In situ formation of polysulfonamide supported poly(ethylene glycol) divinyl ether based polymer electrolyte toward monolithic sodium ion batteries
75. Preparation and characterization of silk fibroin-polyvinyl alcohol (PVA) blend films for food packaging materials10.1016/j.matpr.2022.02.034 ↗
76. Magnesium ion conducting free-standing biopolymer blend electrolyte films for electrochemical device application10.1016/j.jnoncrysol.2022.121741 ↗