Influence of sintering conditions and CuO loss on dielectric properties of CaCu3Ti4O12 ceramics
Source abstract
Abstract
Abstract Phase structures, morphology and dielectric properties of prepared CaCu3Ti4O12 ceramics were investigated to better understand the origin of giant dielectric constant in CCTO system. It was found that the samples' dielectric properties obviously vary with sintering conditions and the corresponding dielectric constant can reach more than 5 × 104 by sintering at 1100 °C for 8˜10 h. XPS results revealed that the ratios of Cu2+/Cu+ and Ti4+/Ti3+on the surface are apparently higher than that in the interiors, showing CuO segregation and oxidation process on the surface of CCTO ceramics during sintering in air. Therefore, it is significant for CCTO to achieve giant permittivity by properly controlling sintering conditions. According to defect chemistry, the mechanisms of defect formation and recombination are proposed to explain the influence of CuO loss on electrical properties of CCTO-base materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric properties of ceramics · Ferroelectric and Piezoelectric Materials · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Base-metal electrode-multilayer ceramic capacitors: past, present and future perspectives10.1143/JJAP.42.1 ↗
2. Correlation between deep depletion and current–voltage saturation of SrTiO3 gate dielectric capacitor10.1016/j.ceramint.2003.12.020 ↗
3. Preparation and electrical properties of SrTiO3 ceramics doped with M2O3–PbO–CuO10.1016/j.sse.2004.04.009 ↗
4. A novel approach to sintering (Ba,Ca)(Ti,Zr)O3 multilayer ceramic capacitors with Ni electrodes10.1016/j.jeurceramsoc.2011.12.012 ↗
5. Structural and dielectric properties of substituted barium titanate ceramics for capacitor applications10.1016/j.ceramint.2015.07.131 ↗
6. Optical response of high-dielectric-constant perovskite-related oxide10.1126/science.1061655 ↗
7. Progress in the growth of CaCu3Ti4O12 and related functional dielectric perovskites10.1016/j.pcrysgrow.2014.04.001 ↗
8. Low-toxic gel casting of giant dielectric-constant CaCu3Ti4O12 ceramics from the molten salt powder10.1016/j.jeurceramsoc.2015.05.034 ↗
9. A novel approach to achieve high dielectric permittivity and low loss tangent in CaCu3Ti4O12 ceramics by co-doping with Sm3+ and Mg2+ ions10.1016/j.jeurceramsoc.2015.06.008 ↗
10. Dielectric properties of pure and Mn-doped CaCu3Ti4O12 ceramics over a wide temperature range10.1007/s10832-016-0024-3 ↗
11. Effect of nickel substitution on electrical and microstructural properties of CaCu3Ti4O12 ceramic10.1016/j.jallcom.2016.12.096 ↗
12. Synthesis and characterization of three dimensionally ordered macroporous of CaCu3Ti4O12 ceramics10.1016/j.matlet.2016.12.108 ↗
13. Enhanced extrinsic dielectric response of TiO2 modified CaCu3Ti4O12 ceramics10.1016/j.ceramint.2015.07.133 ↗
14. Effect of doping ions on the structural defect and the electrical behavior of CaCu3Ti4O12 ceramics10.1016/j.materresbull.2015.12.020 ↗
15. CaCu3Ti4O12: one-step internal barrier layer capacitor10.1063/1.1463211 ↗
16. Giant barrier layer capacitance effects in CaCu3Ti4O12 ceramics10.1002/1521-4095(20020916)14:18<1321::AID-ADMA1321>3.0.CO;2-P ↗
17. Electrical heterogeneity in CaCu3Ti4O12 ceramics fabricated by sol–gel method10.1016/j.ssc.2007.04.005 ↗
18. Capacitance scaling of grain boundaries with colossal permittivity of CaCu3Ti4O12-based materials10.1016/j.solidstatesciences.2015.03.004 ↗
19. Investigation of micro-and nanoscale barrier layer capacitance mechanisms of conductivity in CaCu3Ti4O12 via scanning probe microscopy technique10.1039/C7RA06385G ↗
20. Nonintrinsic origin of the colossal dielectric constants inCaCu3Ti4O12
21. Extrinsic models for the dielectric response of CaCu3Ti4O1210.1063/1.1595708 ↗
22. Raman scattering and x-ray diffraction studies of polycrystalline CaCu3Ti4O12 under high-pressure
23. Evidence for power-law frequency dependence of intrinsic dielectric response in theCaCu3Ti4O12
24. Non-stoichiometry in " CaCu3Ti4O12" (CCTO) ceramics10.1039/c3ra41319e ↗
25. Enhancement of giant dielectric response in CaCu3Ti4O12 ceramics by Zn substitution10.1111/j.1551-2916.2009.03384.x ↗
26. Effect of sintering in oxygen on electrical conduction and dielectric properties in CaCu3Ti4O1210.1016/j.materresbull.2012.10.029 ↗
27. Sol–gel synthesized pure CaCu3Ti4O12 with very low dielectric loss and high dielectric constant10.1016/j.ceramint.2015.07.140 ↗
28. Very low loss tangent and high dielectric permittivity in Pure-CaCu3Ti4O12 ceramics prepared by a modified sol-gel process10.1111/j.1551-2916.2012.05147.x ↗
29. Evidence for internal resistive barriers in a crystal of the giant dielectric constant material: CaCu3Ti4O1210.1016/j.ssc.2005.04.028 ↗
30. Dielectric relaxations and formation mechanism of giant dielectric constant step in CaCu3Ti4O12 ceramics10.1063/1.2785128 ↗
31. Preparation, characterization and dielectric properties of CaCu3Ti4O12 ceramics10.1016/j.ceramint.2011.08.052 ↗
32. Synthesis of CaCu3Ti4O12 ceramic via a sol-gel method10.1016/j.matlet.2006.07.041 ↗
33. Electronic properties of grain boundaries in SrTiO3 and BaTiO3 ceramics10.1016/0167-2738(94)00152-I ↗
34. Decrease in dielectric loss of CaCu3Ti4O12 by the addition of TeO210.1016/j.jnoncrysol.2010.07.049 ↗
35. Grain boundary effect on the dielectric properties of CaCu3Ti4O12 ceramics10.1088/0022-3727/38/11/022 ↗
36. Transformation from insulating p-type to semiconducting n-type conduction in CaCu3Ti4O12-related Na(Cu5/2Ti1/2)Ti4O12 ceramics
37. Polaron relaxation and non-ohmic behavior in CaCu3Ti4O12 ceramics with different cooling methods10.1016/j.matchemphys.2013.02.042 ↗
38. Incipient ferroelectricity and microwave dielectric resonance properties of CaCu2.85Mn0.15Ti4O12 ceramics
39. Novel high capacitance materials: BaTiO3 : La and CaCu3Ti4O1210.1016/S0955-2219(03)00510-7 ↗
40. High frequency response to the impedance complex properties of Nb-doped CaCu3Ti4O12 electroceramics10.1016/j.jallcom.2011.02.145 ↗
41. Nanostripe domains in CaCu3Ti4O12: Its origin and influences on high permittivity response10.1063/1.3457231 ↗