Effect of temperature and hydrogen concentration on the lattice parameter of beta titanium
Source abstract
Abstract
Abstract The lattice parameter of body centered cubic (bcc) beta titanium was determined as a function of temperature and hydrogen concentration using neutron diffraction. In pure titanium, the lattice parameter a = 0.331 nm at 900°C and the thermal expansion coefficient κT = 13.8×10-6 °C-1 over the temperature range 900°C to 1000°C. The solution of hydrogen in beta titanium is seen to expand the lattice but it has little effect on the thermal expansion coefficient. The dependence of the lattice parameter on atomic percent hydrogen was found to be linear over the hydrogen concentration range 0 to 30 at.%, as expressed by the hydrogen-induced expansion coefficient KH = 2.1×10-4 nm/at.%H.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Nuclear Materials and Properties · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. O.N. Senkov, M. Dubois, J.J. Jonas, Elastic moduli of titanium-hydrogen alloys in the temperature range 20°C to 1100°C, Metall. Mater. Trans. A 27A (1996) 3963–3970.10.1007/BF02595645 ↗
2. A. San-Martin, F.D. Manchester. The H-Ti (hydrogen-titanium) system, Bulletin Alloy Phase Diagrams 8 (1987) 30–42.10.1007/BF02868888 ↗
3. E.S. Fisher, C.J. Renken, Single-crystal elastic moduli and the hcp –bcc transformation in Ti, Zr, and Hf, Physical Review 135 (2A) (1964) A482–A494.10.1103/PhysRev.135.A482 ↗
4. E.S. Fisher, D. Dever, The single crystal elastic moduli of beta-titanium and titanium-chromium alloys, in: R.I. Jaffee and N.E. Promisel, (Eds.), The Science, Technology and Applications of Titanium, Pergamon, Oxford, UK, (1968) pp. 373–381.
5. O.N. Senkov, J.J. Jonas, F.H. Froes, Thermally activated flow of beta titanium and titanium-hydrogen alloys, Philosophical Magazine A 80 (2000) 2813–2825.10.1080/01418610008223896 ↗
6. V.A. Livanov, A.A. Bukhanova, B.A. Kolachev, Hydrogen in Titanium, Daniel Davey, New York, 1965.
7. N.F. Miron, V.I. Shcherbak, V.N. Bykov, V.A. Levdik, Neutron diffraction study of the structures of the metastable γ and the high-temperature β phases in the Ti-D system, Soviet Phys Crystallography 19 (1975) 468–470.
8. J. Spreadborough, J.W Christian, The measurements of the lattice expansions and Debye temperatures of titanium and silver by x-ray methods, Proc Phys Soc London 74 (1959) 609–615.10.1088/0370-1328/74/5/314 ↗
9. A.C. Larson, R.B. Von Dreele, GSAS, Generalized Structure Analysis System, Los Alamos National Laboratory, Rept 1986, LAUR 86–748, 1986.
10. O.N. Senkov, J.J. Jonas, Effect of phase composition and hydrogen level on the deformation behavior of titanium-hydrogen alloys, Metall. Mater. Trans. A 27A (1996) 1869–1876.10.1007/BF02651936 ↗
11. W.R. Kerr, P.R. Smith, M.E. Rosendlum, F.J. Gurney, Y.R. Mahajan, L.R. Bidwell, Hydrogen as an alloying element in titanium (HYDROVAC), in: H. Kimura and O. Izumi (Eds.), Titanium ’80 Science and Technology, TMS, Warrendale, PA, (1980) 2477–2486.
12. NIST Neutron Crystallography Resources, http://www.ncnr.nist.gov/programs/crystallography.