Carbide-leading texture of eutectic microstructure in As-cast high chromium cast balls
Source abstract
Abstract
Abstract An unusual texture was observed in eutectic microstructure of high chromium cast balls. Amount of eutectic carbides, different from the eutectic austenite, were almost parallel to the cast ball surface. There were low-angle boundaries in the austenite grains or the carbide grains. It is seen that carbides have an axial nucleation mode and a lateral growth mode. Neither oriented nucleation nor oriented growth can account for the austenitic behavior individually. Really, austenite grows dependently of contiguous carbides, whose orientation is affected by both the spatial limit of contiguous carbides and the solidification temperature gradient. Finally, eutectic carbides effect the orientation of eutectic microstructure during solidification including the austenite deflection orientation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. 3D quantitative analysis of graphite morphology in high strength cast iron by high-energy X-ray tomography10.1016/j.scriptamat.2015.03.017 ↗
2. Effect of titanium on the as-cast microstructure of a 16%chromium white iron10.1016/j.msea.2005.03.072 ↗
3. Maximizing wear resistance of balls for grinding of coal10.1016/j.wear.2007.02.013 ↗
4. Matrix microstructure effect on the abrasion wear resistance of high-chromium white cast iron10.1007/BF02385662 ↗
5. Solidification structure of C2.08Cr25.43Si1.19Mn0.43Fe70.87 powders fabricated by high pressure gas atomization10.1016/j.matchar.2009.11.001 ↗
6. Fe–C nanograined alloys obtained by high-pressure torsion: structure and magnetic properties10.1016/j.msea.2008.03.052 ↗
7. Effects of microstructures on the abrasive wear behaviour of spheroidal cast iron10.1016/0043-1648(94)06499-7 ↗
8. High wear resistance of white cast iron treated by novel process: principle and mechanism10.1007/s11661-015-3137-4 ↗
9. Two- and three-body abrasive wear behaviour of different heat-treated boron alloyed high chromium cast iron grinding balls10.1016/S0924-0136(00)00550-1 ↗
10. Sliding wear response of a grey cast iron: effects of some experimental parameters10.1016/j.triboint.2011.01.006 ↗
11. The effect of Si on the relationship between orientation and carbide morphology in high chromium white irons10.1023/A:1018558928916 ↗
12. Effect of boron on microstructure of directionally solidified high chromium white irons10.1179/136404611X12965641181767 ↗
13. EBSD characterization of dendrite growth directions, texture and misorientations in hot-dipped Al–Zn–Si coatings10.1016/S1359-6454(00)00322-0 ↗
14. Complete and incomplete wetting of ferrite grain boundaries by austenite in the low-alloyed ferritic steel10.1007/s11665-012-0130-6 ↗
15. Microstructure and crystallography of M7C3 carbide in chromium cast iron10.1016/j.matchemphys.2015.05.008 ↗
16. Formation of eutectic carbides in Fe–Cr–Mo–C alloy during non-equilibrium crystallization10.1016/j.matdes.2016.01.028 ↗