Dynamic strain aging in Inconel718 additively manufactured lattices
Source abstract
Abstract
The aim of this work is to investigate the manifestations of dynamic strain aging (DSA) on the mechanical behavior of Inconel718 body centered cubic (BCC) and face centered cubic (FCC) strut-based lattices manufactured via laser powder bed fusion. With that goal, both lattices were tested uniaxially in compression at temperatures ranging from 25 to 600 °C at 1x10-3 s−1 and strain rate jump tests were carried out at the same temperatures between 1x10-5 and 5x10-2 s−1 in order to detect the occurrence of serrated flow and to analyze the strain rate sensitivity. It was found that DSA manifests at the metamaterial level within a range of testing conditions that is highly dependent on the lattice topology. In particular, DSA is comparatively more pronounced in the FCC architecture. This study emphasizes the importance of analyzing the incidence of DSA in additively manufactured lattice structures targeted for structural applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Mechanical metamaterials and their engineering applications10.1002/adem.201800864 ↗
2. Architected cellular materials: a review on their mechanical properties towards fatigue-tolerant design and fabrication10.1016/j.mser.2021.100606 ↗
3. Ultralight, ultrastiff mechanical metamaterials10.1126/science.1252291 ↗
4. A review of the selective laser melting of lattice structures and their numerical models
5. SLM lattice structures: properties, performance, applications and challenges10.1016/j.matdes.2019.108137 ↗
6. Additive manufacturing of metallic lattice structures: unconstrained design, accurate fabrication, fascinated performances, and challenges10.1016/j.mser.2021.100648 ↗
7. Dynamic strain aging studied at the atomic scale10.1016/j.actamat.2014.12.028 ↗
8. Theory of the effect of dynamic strain aging on mechanical properties10.1002/pssa.2210300120 ↗
9. Dislocation theory of yielding and strain ageing of iron10.1088/0370-1298/62/1/308 ↗
10. A predictive mechanism for dynamic strain ageing in aluminium–magnesium alloys10.1038/nmat1765 ↗
11. Origin of the reversed yield asymmetry in Mg-rare earth alloys at high temperature10.1016/j.actamat.2015.03.053 ↗
12. Solute segregation and texture modificatio in an extruded magnesium alloy containing gadolinium10.1016/j.scriptamat.2011.08.012 ↗
13. Microstructural and mechanical influences on dynamic strain aging phenomena10.1179/imr.1994.39.3.113 ↗
14. Simulating the mechanisms of serrated flow in interstitial alloys with atomic resolution over diffusive timescales10.1038/s41467-020-15085-3 ↗
15. Coupled effect of microstructure and topology on the mechanical behavior of Inconel718 additively manufactured lattices10.1016/j.matdes.2022.111294 ↗
16. Foam topology bending versus stretch dominated architectures10.1016/S1359-6454(00)00379-7 ↗
17. Precipitation-induced transition in the mechanical behavior of 3D printed Inconel 718 bcc lattices10.1016/j.scriptamat.2021.114075 ↗