Post-mortem characterization of Rh/Ce0.75Zr0.25O2/Al2O3/FeCrAl wire mesh composite catalyst for diesel autothermal reforming
Source abstract
Abstract
Abstract Front and end zones of Rh/Ce0.75Zr0.25O2−δ-ƞ-Al2O3/FeCrAl wire mesh catalytic module were studied by transmission electron microscopy (TEM) and scanning electron microscopy (SEM) techniques after more than 250 h on stream under hydrocarbon fuels steam (SR) and autothermal reforming (ATR) conditions. Catalyst coking by fibrous carbon growth under diesel ATR conditions was confirmed. This process was mainly located on the surface of the catalytic coating and did not induce exfoliation and damage of coating. Coking was attributed to contamination by iron, which was confirmed by TEM and energy-dispersive X-ray spectroscopy (EDX). Despite catalyst carbonization, the composite catalyst was shown to be stable and regeneratable under hydrocarbon ATR and SR conditions, no morphology and microstructure degradation was identified in both front and end zones of the monolith.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalytic Processes in Materials Science · Catalysts for Methane Reforming · Catalysis and Hydrodesulfurization Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Mechanical behavior and dynamic failure of high-strength ultrafine grained tungsten under uniaxial compression
2. Electrochemical characterization and post-mortem analysis of aged LiMn2O4–NMC/graphite lithium ion batteries part II: calendar aging10.1016/j.jpowsour.2014.02.019 ↗
3. Promoted RhPt bimetallic catalyst supported on δ-Al2O3 and CeO2–ZrO2 during full-scale autothermal reforming for automotive applications: post-mortem characterization10.1016/j.apcata.2014.11.035 ↗
4. Post-mortem characterization of coke-induced deactivated alumina-supported Co–Ni catalysts10.1016/j.ces.2005.11.021 ↗
5. A circular bioeconomy with biobased products from CO2 sequestration10.1016/j.tibtech.2016.02.012 ↗
6. Anthropogenic chemical carbon cycle for a sustainable future10.1021/ja202642y ↗
7. Hydrogen as an energy carrier: prospects and challenges10.1016/j.rser.2012.02.028 ↗
8. Current research trends and perspectives on materials-based hydrogen storage solutions: a critical review10.1016/j.ijhydene.2016.11.195 ↗
9. The survey of key technologies in hydrogen energy storage10.1016/j.ijhydene.2016.05.293 ↗
10. Review of hydrogen storage techniques for on board vehicle applications10.1016/j.ijhydene.2013.07.058 ↗
11. Challenges in the greener production of formates/formic acid, methanol, and DME by heterogeneously catalyzed CO2 hydrogenation processes10.1021/acs.chemrev.6b00816 ↗
12. Introduction to fuel processing
13. Highly dispersed Rh/Ce0.75Zr0.25O2-δ-ƞ-Al2O3/FeCrAl wire mesh catalyst for autothermal n-hexadecane reforming10.1016/j.matlet.2017.12.017 ↗
14. Sorption-hydrolytic deposition for diesel fuel reforming to syngas10.1016/j.apcatb.2018.06.003 ↗
15. From alumina modified Rh/Ce0.75Zr0.25O2-δ catalyst towards composite Rh/Ce0.75Zr0.25O2-δ-ƞ-Al2O3/FeCrAl catalytic system for diesel conversion to syngas10.1016/j.apcatb.2018.12.037 ↗
16. Design scale-up, and operation of a Rh/Ce0.75Zr0.25O2-δ-ƞ-Al2O3/FeCrAl alloy wire mesh honeycomb catalytic module in diesel autothermal reforming10.1016/j.cej.2019.05.205 ↗
17. Composite Rh/Zr0.25Ce0.75O2-δ-ƞ-Al2O3/Fecralloy wire mesh honeycomb module for natural gas, LPG and diesel catalytic conversion to syngas10.1016/j.ijhydene.2018.12.148 ↗