Microstructure and mechanical properties of SiC whisker reinforced CoCrNi medium entropy alloys
Source abstract
Abstract
Abstract The CoCrNi/SiC whisker (SiCw) composite was developed by a combination method of coating and spark plasma sintering (SPS). SiCw could be evenly distributed on the CoCrNi gas-atomized powder after coating and an obvious grain refinement could be observed in the microstructure of composite after sintering. Meanwhile, the CoCrNi/SiCw composite with a trace of in-situ M23C6 phases showed superior mechanical properties: addition of 2 wt% SiCw led to an increase in the yield strength (YS) and hardness from 352 MPa and 159 HV to 595 MPa and 422 HV respectively, compared with the CoCrNi MEA. The improved strength is attributed to synergistic effects of Orowan strengthening, grain refinement and thermal mismatch mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
2. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
3. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
4. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
5. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
6. Microstructure and mechanical properties of equimolar FeCoCrNi high entropy alloy prepared via powder extrusion10.1016/j.intermet.2016.05.006 ↗
7. Laser–plasma driven green synthesis of size controlled silver nanoparticles in ambient liquid10.1016/j.nanoso.2018.09.006 ↗
8. Microwave-assisted solid-state synthesis of Au nanoparticles, size-selective speciation, and their self-assembly into 2D-superlattice10.1016/j.nanoso.2019.01.010 ↗
9. Tensile mechanical properties of SiC whiskers10.1007/BF01026310 ↗
10. Mechanical and microstructural characterization of powder metallurgy CoCrNi medium entropy alloy10.1016/j.msea.2017.06.086 ↗
11. Effect of SiC nano-particles on microstructure and mechanical properties of the CoCrFeMnNi high entropy alloy10.1016/j.jallcom.2017.02.274 ↗
12. Strain-rate effect upon the tensile behavior of CoCrFeNi high-entropy alloys10.1016/j.msea.2017.02.077 ↗
13. Design of a twinning-induced plasticity high entropy alloy10.1016/j.actamat.2015.04.014 ↗
14. Effect of low temperature on tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy10.1016/j.matchemphys.2017.06.023 ↗
15. Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements10.1007/s11661-005-0283-0 ↗
16. Exploring the intrinsic ductile metastable Fe-C compounds: Complex chemical bonds, anisotropic elasticity and variable thermal expansion10.1016/j.jallcom.2018.02.140 ↗