The effect of interlayer thickness on liquid state diffusion bonding behavior of dissimilar stainless steel 316/Ti-6Al-4V system
Source abstract
Abstract
Abstract The liquid state diffusion bonding mechanism of stainless steel 316 to Ti-6Al-4 V using pure Cu interlayer has been investigated at 1100 °C for 60 min bonding time. The microstructure of joint zone was analyzed in detail by scanning electron microscope and energy dispersive spectroscopy. The microhardness and shear strength tests were also applied to characterize mechanical properties of the joints. The results showed that increasing the interlayer thickness led to the extension of diffusion zone and the increase of final joint width. The maximum shear strength of 284 MPa was obtained for the bond made with 50 µm thick interlayer while with an increase in interlayer thickness, the shear strength values decreased to 145 MPa that could be attributed to formation of brittle intermetallics such as Cu2Ti and CuTi at the interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Intermetallics and Advanced Alloy Properties · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Characterization of transition joints of commercially pure titanium to 304 stainless steel10.1016/S1044-5803(02)00306-6 ↗
2. Interdiffusion studies in titanium–304 stainless steel system10.1016/S0022-3115(98)00179-2 ↗
3. Laser roll welding of dissimilar metal joint of titanium to low carbon steel10.4028/www.scientific.net/MSF.580-582.543 ↗
4. Diffusion bonded transition joints of titanium to stainless steel with improved properties10.1016/S0921-5093(03)00298-3 ↗
5. Diffusion bonding titanium to stainless steel using Nb/Cu/Ni multi-interlayer10.1016/j.matchar.2012.03.016 ↗
6. Interfacial microstructure and mechanical properties of diffusion-bonded titanium–stainless steel joints using a nickel interlayer10.1016/j.msea.2006.03.034 ↗
7. Diffusion bonding of commercially pure titanium to 304stainless steel using copper interlayer10.1016/j.msea.2005.07.010 ↗
8. Preliminary investigation on brazing performance of Ti/Ti and Ti/Steel joints using copper film deposited by PVD technique10.1007/s11665-012-0121-7 ↗
9. Overview of transient liquid phase and partial transient liquid phase bonding10.1007/s10853-011-5561-1 ↗
10. Microstructures of brazing zone between titanium alloy and stainless steel using various filler metals10.1016/S1003-6326(12)61778-6 ↗
11. Voort · 2004 · 9
12. ASTM standard D1002, Standard test method for apparent shear strength of single-lap-joint adhesively bonded metal specimens by tension loading (metal-to-metal), 1999, ASTM International.
13. Formation process of liquid in interface of Ti/Cu contact reactioncouple
14. Effect of interface microstructure on the bond strength of the diffusion welded joints between titanium and stainless steel10.1016/j.matchar.2004.12.007 ↗