Yield point elongation in fine-grained titanium
Source abstract
Abstract
Abstract Fine-grained (FG) titanium with average grain size of around 1 μm was produced by annealing nano-grained (NG) Ti at 500 °C for different time. The tensile deformation behaviors of this FG Ti were investigated. The phenomenon of yield point elongation (YPE), namely, a plateau following yielding in the stress–strain curve, is observed in FG Ti. It is found that, with increase of the grain size, the YPE in FG Ti appeared and increased to a maximum value, then decreased and, finally disappeared. Microstructures of FG Ti samples before and after the YPE were investigated. The results show that this YPE phenomenon is attributed to the dislocation behaviors and characteristics of grain size in the FG Ti.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Luders-like deformation induced by delta-ferrite-assisted martensitic transformation in a dual-phase high-manganese steel10.1016/j.scriptamat.2012.05.010 ↗
2. Work-hardening of ferrite and microstructure-based modelling of its mechanical behaviour under tension10.1016/j.actamat.2008.05.023 ↗
3. Hall · 1970
4. Sub-structure strengthening and work hardening of an ultra-fine grained aluminium–magnesium alloy10.1016/j.msea.2006.11.166 ↗
5. Modelling grain boundary strengthening in ultra-fine grained aluminum alloys10.1016/j.msea.2005.08.121 ↗
6. The effect of cold rolling and annealing on the serrated yielding phenomenon of AA5182 aluminum alloy10.1016/j.msea.2004.01.041 ↗
7. Effect of Ni content on the tensile properties and strain-induced martensite transformation for 304 stainless steel10.1016/j.msea.2010.12.022 ↗
8. Yield point elongation due to twinning in a magnesium alloy10.1016/j.actamat.2011.11.022 ↗
9. Simultaneously enhanced strength and ductility of titanium via multimodal grain structure10.1016/j.scriptamat.2010.07.010 ↗
10. Effects of annealing on microstructure and mechanical properties of nano-grained titanium produced by combination of asymmetric and symmetric rolling10.1016/j.msea.2012.08.005 ↗
11. The effect of annealing on tensile deformation behavior of nanostructured SPD titanium10.1016/S1359-6462(03)00395-6 ↗
12. Effect of initial microstructure on the microstructural evolution and mechanical properties of Ti during cold rolling10.1016/j.msea.2004.06.054 ↗
13. Dislocation theory of yielding and strain ageing of iron10.1088/0370-1298/62/1/308 ↗
14. Luders band deformation in a fine grained aluminium alloy10.1016/0001-6160(77)90170-5 ↗