Mimicking flower petals to fabricate self-cleaning and antireflective polymer surfaces

This work explored a facile way to fabricate superhydrophobic and antireflective polymer surfaces using Canna indica flower petals. A simple, inexpensive two-step soft-lithography technique was employed to replicate the surface structures of C. indica flower petals onto two different polymer surfaces namely, polydimethylsiloxane (PDMS) — a hydrophobic polymer and resorcinol–formaldehyde (RF) xerogel — a hydrophilic polymer. First, a negative replica was prepared in PDMS using the flower petal as a template. Second, the negative PDMS replica was later used as a stamp to prepare a positive replica in both PDMS and RF xerogel. These replicated structured surfaces greatly influenced the wettability properties. The contact angle of the replicated PDMS surfaces increased to the nearly superhydrophobic values of 145° (negative PDMS replica) and 144° (positive PDMS replica) compared with that of the plain surface, which is 101°. Interestingly, the contact angle of the replicated RF surface significantly increased to 151° (superhydrophobic) compared with that of the planar RF surface, which is hydrophilic (68°). Furthermore, the replicated polymer surfaces exhibited not only excellent superhydrophobic properties but also antireflective properties. These multifunctional surfaces with superhydrophobicity as well as an omnidirectional antireflective property may find a wide range of applications, such as solar energy harvesting, optical displays and marine applications.