Crack-free Fe-based amorphous coating synthesized by laser cladding
Source abstract
Abstract
Abstract Laser cladding of crack-free Fe-based amorphous coatings remains a challenge due to their intrinsic brittleness and the generation of huge thermal stress during the laser process. In this paper, we have applied a triple laser scanning strategy, which incorporates a first laser scan to heat the substrate, a second laser scan to produce amorphous coating, followed immediately by a third laser scan to in-situ release the thermal stress formed within the amorphous coating, to prevent the generation of crack during the laser cladding of an Fe37.5Cr27.5C12B13Mo10 amorphous coating. The microstructure and wear resistance of the crack-free Fe-based amorphous coating were also examined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · High Entropy Alloys Studies · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Bulk metallic glasses
2. Saturated magnetization and glass forming ability of soft magnetic Fe-based metallic glasses10.1016/j.intermet.2017.01.003 ↗
3. Fe-B-Si-Zr bulk metallic glasses with ultrahigh compressive strength and excellent soft magnetic properties10.1016/j.matlet.2016.06.052 ↗
4. A study of the nanoscale and atomic-scale wear resistance of metallic glasses10.1016/j.matlet.2016.08.035 ↗
5. Effect of Co addition on the shear viscosity of Fe-based bulk metallic glasses10.1016/j.jnoncrysol.2014.07.012 ↗
6. Specific heat capacities of Fe-Co-Cr-Mo-C-B-Y bulk metallic glasses and their correlation with glass-forming ability10.1016/j.matlet.2014.12.117 ↗
7. Enhancement of impact resistance of Fe-based amorphous coating by Al2O3 dispersion10.1016/j.matlet.2016.02.060 ↗
8. Fe-based amorphous coating for corrosion protection of magnesium alloy10.1016/j.matdes.2016.07.031 ↗
9. Fe-based bulk metallic glasses with diameter thickness larger than one centimeter10.1557/JMR.2004.0176 ↗
10. Spraying of Fe-based amorphous coating with high corrosion resistance by HVAF10.1016/j.jmapro.2016.01.009 ↗
11. High-velocity oxygen fuel thermal spray of fe-based amorphous alloy: a numerical and experimental study10.1007/s11661-009-9900-7 ↗
12. Effects of three sealing methods of aluminum phosphate sealant on corrosion resistance of the Fe-based amorphous coating10.1016/j.surfcoat.2016.12.033 ↗
13. Fabrication and characterization of Fe-based amorphous coatings prepared by high-velocity arc spraying10.1016/j.matdes.2015.04.027 ↗
14. The corrosion behaviours of plasma-sprayed Fe-based amorphous coatings
15. Fe-based metallic glass coatings produced by smart plasma spraying process10.1016/j.mseb.2007.09.035 ↗
16. Microstructure and properties of Fe-based amorphous composite coating prepared by pulse laser10.4028/www.scientific.net/MSF.849.642 ↗
17. Hot corrosion behavior of a centimeter Fe-based amorphous composite coating prepared by laser cladding in molten Na2SO4+K2SO4 salts10.1016/j.surfcoat.2015.03.022 ↗
18. Thermo-mechanical model for simulating laser cladding induced residual stresses with single and multiple clad beads10.1016/j.jmatprotec.2015.04.031 ↗
19. 3D analysis of thermal and stress evolution during laser cladding of bioactive glass coatings10.1016/j.jmbbm.2016.02.023 ↗
20. The role of a low-energy–density re-scan in fabricating crack-free Al85Ni5Y6Co2Fe2 bulk metallic glass composites via selective laser melting10.1016/j.matdes.2014.06.022 ↗
21. Residual stress and cracking behaviors of Cr13Ni5Si2 based composite coatings prepared by laser-induction hybrid cladding10.1016/j.surfcoat.2015.04.035 ↗
22. Residual stress and crack initiation in laser clad composite layer with Co-based alloy and WC+NiCr10.1016/j.apsusc.2015.03.168 ↗
23. Laser solid forming Zr-based bulk metallic glass10.1016/j.intermet.2011.10.008 ↗
24. Processing metallic glasses by selective laser melting10.1016/j.mattod.2013.01.018 ↗
25. Effect of substrate temperature on the interface bond between support and substrate during selective laser melting of Al-Ni-Y-Co-La metallic glass10.1016/j.matdes.2014.08.065 ↗
26. On the nature of density changes upon structural relaxation and crystallization of metallic glasses10.1016/j.jnoncrysol.2017.06.024 ↗