Magnetostrictive EMAT for Nuclear Spent Fuel Canisters
Source abstract
Abstract
One approach for mitigation of stainless steel (SS) spent fuel canisters (SFCs) is to coat the welds or even the entire SFC with a cold-sprayed nickel coating. The coating can serve as a magnetostrictive interface between an electromagnetic acoustic transducer (EMAT) and the SS plate material. The EMAT can send ultrasound into the canister and “listen” for reflections caused by chloride-initiated stress corrosion cracking (CISCC) or other damage mechanisms that may lead to leaks if undetected and unmitigated. This project outlines an approach for monitoring the integrity of SFCs using magnetostrictive EMAT sensors, which emit and detect discontinuity-initiated reflections indicative of pits or cracks likely arising from CISCC. Flat 13 mm SS plates with welds similar to actual canister welds were prepared, with flat-bottom holes 3 mm and 6 mm deep and 6 mm in diameter placed within the weld heat-affected zone (HAZ). The most effective sensor configurations were able to detect critical discontinuities more than 2 m away. Although a single sensor could be robotically deployed, the large volume covered by each sensor could support a small number of permanently mounted sensors, equipped with an external connector for periodic interrogation. The HAZ of a hypothetical SFC cylindrical surface could be effectively monitored with just 16 sensors.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques · Geophysical Methods and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Ali, S., B. Lopez, and F. Weinmeister. 2017. “Inspection of Hanford Double Shell Tank Bottom Using Electromagnetic Acoustic Transducer (EMAT) Techniques.” ASNT Annual Conference, 30 October–2 November, Nashville, TN.
2. Broussard, J. E., III. 2021. “Technical Basis Summary for Code Case N-860: Inspection Requirements and Evaluation Standards for Spent Nuclear Fuel Storage and Transportation Containment Systems.” ASME Pressure Vessels & Piping Virtual Conference, July 13–15. https://doi.org/10.1115/PVP2021-64176.10.1115/pvp2021-64176 ↗
3. Choi, S., H. Cho, and C. J. Lissenden. 2018. “Nondestructive inspection of spent nuclear fuel storage canisters using shear horizontal guided waves.” Nuclear Engineering and Technology 50 (6): 890–98. https://doi.org/10.1016/j.net.2018.04.011.10.1016/j.net.2018.04.011 ↗
4. Denslow, K. M., J. R. Larche, T. L. Moran, and S. W. Glass. 2018. PNNL-26924 NDE Technology Development Program for Non-Visual Volumetric Inspection Technology. Pacific Northwest National Laboratory, Richland, WA. https://doi.org/10.2172/1479463.10.2172/1479113 ↗
5. Glass, S. W., J. P. Lareau, K. S. Ross, S. Ali, F. Hernandez, and B. Lopez. 2019. “Magnetostrictive Cold Spray Sensor for Long-Term or Harsh Environment Ultrasound.” ASNT Research Symposium, 1–4 April, Garden Grove, CA. https://doi.org/10.32548/RS.2019.009.10.32548/rs.2019.009 ↗
6. Iowa State University Center for Nondestructive Evaluation. 2015. “Signal-to-Noise Ratio.” Accessed 13 March 2024. https://www.nde-ed.org/Physics/Waves/signaltonoise.xhtml.
7. Meyer, R. M., A. Qiao, A. F. Pardini, M. Larche, J. M. Cuta, A. A. Diaz, H. E. Adkins, S. R. Doctor, and A. M. Casella. 2013. PNNL-22495 NDE to Manage Atmospheric SCC in Canisters for Dry Storage of Spent Fuel: An Assessment. Pacific Northwest National Laboratory, Richland, WA. https://doi.org/10.2172/1183635.10.2172/1183635 ↗
8. Meyer, R. M., J. B. Renshaw, J. Beard, J. Tatman, M. Keene, P. Plante, N. Fales, G. Grant, U. Wolf, K. Mauskar, D. S. Dunn, and B. P. Lin. 2021. “In-Service Inspection of Extended Dry Storage of Spent Nuclear Fuel, Part I: Crawler Technology Development.” ASME Pressure Vessels & Piping Virtual Conference, July 13–15. https://doi.org/10.1115/PVP2021-62058.10.1115/pvp2021-62058 ↗
9. US Nuclear Regulatory Commission. 2012. “Spent Fuel Storage in Pools and Dry Casks – Key Points and Questions & Answers.” https://www.nrc.gov/docs/ML1209/ML120970230.pdf.
10. Renshaw, J. B., J. Beard, S. Glovsky, and A. Bryant. 2017. EPRI Report 3002010621 Inspection and Delivery System Development and Field Trials for Dry Canister Storage System Evaluation. EPRI. https://www.epri.com/research/products/000000003002010621.
11. Rose, J. L. 2011. “The Upcoming Revolution in Ultrasonic Guided Waves.” Proceedings Volume 7983 798302-1. SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 6–10 March, San Diego, CA. https://doi.org/10.1117/12.897025.10.1117/12.897025 ↗
12. Rose, J. L. 2014. Ultrasonic Guided Waves in Solid Media. Cambridge: Edited by Cambridge University Press. https://doi.org/10.1017/CBO9781107273610.10.1017/CBO9781107273610 ↗
13. Wu, J., Z. Tang, K. Yang, and F. Lv. 2019. “Signal Strength Enhancement of Magnetostrictive Patch Transducers for Guided Wave Inspection by Magnetic Circuit Optimization.” Applied Sciences (Basel, Switzerland) 9 (7): 1477. https://doi.org/10.3390/app9071477.10.3390/app9071477 ↗
14. Xie, Y. and J. Zhang. 2015. “Chloride-induced stress corrosion cracking of used nuclear fuel welded stainless steel canisters: A review.” Journal of Nuclear Materials 466:85–93. https://doi.org/10.1016/j.jnucmat.2015.07.04310.1016/j.jnucmat.2015.07.043 ↗