Study on multi-stage kinetics and main dissipation interval of magnetization reversal of nanocrystalline alloys under high-frequency excitation
Source abstract
Abstract
To quantify the time-domain concentration of hysteretic dissipation in FINEMET-type nanocrystalline alloys, a three-dimensional amorphous/nanocrystalline micromagnetic model is developed under prescribed sinusoidal magnetic-field excitation. The model is validated against measured static magnetic properties and dynamic hysteresis-loop areas in the 1–20 kHz range. The magnetization reversal half-cycle is segmented into five stages for time-domain analysis: initial stability, energy pre-accumulation and magnetization relaxation, domain nucleation and early expansion, domain-wall-dominated rapid reversal, and saturation approaching with structural adjustment. These stages correspond to established micromagnetic processes and are used to correlate magnetization, magnetization rate, domain evolution, energy terms, and damping-related dissipation. A q -dependent main dissipation interval ( q -MDI) is introduced as the shortest time interval in which a prescribed fraction q of the half-cycle dissipated energy is accumulated. The representative 60%-MDI and threshold-sensitivity results indicate that the most concentrated dissipation occurs mainly near the transition from domain nucleation to rapid domain-wall propagation. Within the present equivalent model, increasing field amplitude produces a model-dependent transition near 28 mT, while increasing frequency shifts the 60%-MDI toward earlier stages of the half-cycle and gradually stabilizes its location. These results provide guidance for material-level micromagnetic analysis and microstructure-informed design of nanocrystalline soft magnetic alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties and Applications · Magnetic properties of thin films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Thermal runaway and induced electrical failure of epoxy resin in high-frequency transformers: Insulation design reference10.1049/hve2.12424 ↗
2. Measurement sensitivity and reliability analysis of the space charge ellipsometry detection system
3. Advanced soft magnetic materials for the development of high-frequency magnetic core used in solid-state transformers
4. Deep supercooling solidification towards tuned amorphous/nanocrystalline dual phases for superior magnetic nanocrystalline alloys10.1016/j.matdes.2024.113469 ↗
5. Ultrahigh permeability at high frequencies via a magnetic-heterogeneous nanocrystallization mechanism in an iron-based amorphous alloy10.1002/adma.202304490 ↗
6. Magnetic core losses under high-frequency typical non-sinusoidal voltage magnetization
7. Electromagnetic anisotropic homogeneous model for eddy-current field in single-phase wound core10.1049/hve2.12387 ↗
8. Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation10.1109/28.936396 ↗
9. Improved core-loss calculation for magnetic components employed in power electronic systems10.1109/TPEL.2011.2162252 ↗
10. Core loss modeling and calculation for trapezoidal magnetic flux density waveform10.1109/TIE.2020.3013750 ↗
11. The composite improved generalized steinmetz equation (ciGSE): an accurate model combining the composite waveform hypothesis with classical approaches10.1109/TPEL.2023.3323577 ↗
12. General properties of power losses in soft ferromagnetic materials10.1109/20.43994 ↗
13. A core loss calculation method for DC/DC power converters based on sinusoidal losses10.1109/TPEL.2022.3199041 ↗
14. Simulation of magnetic properties of electrical steel sheets based on improved Preisach model
15. A dynamic energetic hysteresis model based on the field separation approach and statistical theory of losses
16. Core loss calculation based on finite-element method with Jiles–Atherton dynamic hysteresis model
17. Magnetic maze in steel resolved by correlative structural analysis10.1016/j.matdes.2025.115260 ↗
18. Micromagnetic analysis of external and internal impact factors on kHz level saturation magnetization for nanocrystalline alloy
19. Analysis of grain size and volume fraction of nanocrystalline alloy on high frequency magnetic loss characteristics
20. Effect of grain size on magnetic loss of nanocrystalline alloy under high-frequency non-sinusoidal excitation10.1109/TMAG.2023.3277075 ↗
21. Magnetization dynamics coarse graining through Landau-Lifshitz-Gilbert equation renormalization10.1109/TMAG.2011.2146235 ↗
22. R. Diba, M. Plumer, I. Saika-Voivod. Simulating micromagnetism. Adv. Phys.-X 2024; 9(1): 1-30. 10.1080/23746149.2024.2409070.10.1080/23746149.2024.2409070 ↗
23. Modern soft magnets: amorphous and nanocrystalline materials10.1016/j.actamat.2012.10.040 ↗
24. Influence of the external and internal factors on saturation magnetization process for nanocrystalline alloy10.1109/TMAG.2018.2854799 ↗
25. Simulation of dynamic hysteresis characteristics of high frequency transformer core under non-sinusoidal excitation
26. Optimizing heat dissipation in permalloy wire-tube nanostructures: a pathway to improved hyperthermia treatments10.1063/5.0261010 ↗