journal article·2026-06Open access

Precision design of dissolving microneedles via mechanically induced micro-vent and Capillary-Controlled Molding: From fabrication to mechanical characterization

Sangjun Pyo, Jaehyeong Kim, Hyerin Ahn, Ok Chan Jeong

Materials & Design· Volume 266

Abstract

• Rheology-guided pre-curing physically suppresses capillary failures. • Mechanically induced micro-vents enable reliable microneedle casting. • A piecewise linear model defines coupled microneedle-skin mechanics. • Tip diameters below 25 µm enabled reliable insertion in layered skin. Dissolving microneedles with controlled geometry are difficult to fabricate reproducibly because liquid polydimethylsiloxane (PDMS) molding is prone to meniscus failure and bubble entrapment. Here, we formed a PDMS master mold by directly inserting metal needles into thermally pre–cured PDMS and used rheology to identify the insertion window for stable cavity replication. A modified Young–Laplace model described the capillary-dominated failure of liquid PDMS, whereas successful meniscus suppression occurred after PDMS entered a gel-like viscoelastic regime. Under our conditions, pre–curing for 6 min on a 100 °C hotplate enabled faithful cavity replication and the fabrication of gelatin microneedle arrays with heights of 500–1500 µm. As the gelatin concentration increased from 25 to 40 % (w/v), Young’s modulus increased from 0.286 to 1.826 GPa. Compression and insertion tests using a multilayer artificial skin model identified distinct insertion phases and showed that microneedles with tip diameters of up to 25 µm reliably penetrated the model. These results provide a simple PDMS mold fabrication route and a rheology-guided basis for designing and mechanically evaluating dissolving gelatin microneedles.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Transdermal Drug Delivery · 3D Printing in Biomedical Research · Wound Healing and Treatments

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (81)

Show source-provided references
1. Advances in Oral Drug delivery10.3389/fphar.2021.618411 ↗
2. Microneedles for drug and vaccine delivery10.1016/j.addr.2012.04.005 ↗
3. Transdermal delivery of drugs with Microneedles—Potential and challenges10.3390/pharmaceutics7030090 ↗
4. Microneedle patch as a new platform to effectively deliver inactivated polio vaccine and inactivated rotavirus vaccine10.1038/s41541-022-00443-7 ↗
5. Sampling interstitial fluid from human skin using a microneedle patch10.1126/scitranslmed.aaw0285 ↗
6. Continuous monitoring of diabetes with an integrated microneedle biosensing device through 3D printing10.1038/s41378-021-00302-w ↗
7. Dissolving polymer microneedles for transdermal delivery of insulin
8. Development of low-cost rapid fabrication of sharp polymer microneedles for in vivo glucose biosensing applications10.1149/2.0141510jss ↗
9. Bulk micromachined titanium microneedles10.1109/JMEMS.2007.892909 ↗
10. Applying ceramic nanoporous microneedle arrays as a transport interface in egg plants and an ex-vivo human skin model10.1016/j.mee.2012.07.022 ↗
11. Microinfusion using hollow microneedles10.1007/s11095-005-8498-8 ↗
12. S.P. Sullivan, D.G. Koutsonanos, M. del Pilar Martin, J.W. Lee, V. Zarnitsyn, S.-O. Choi, N. Murthy, R.W. Compans, I. Skountzou, M.R. Prausnitz, Dissolving polymer microneedle patches for influenza vaccination, Nat. Med. 16 (8) (2010) 915-920. https://doi.org/10.1038/nm.2182.10.1038/nm.2182 ↗
13. Hydrogel-forming microneedle arrays allow detection of drugs and glucose in vivo: potential for use in diagnosis and therapeutic drug monitoring10.1371/journal.pone.0145644 ↗
14. Dissolving microneedles for transdermal drug delivery10.1016/j.biomaterials.2007.12.048 ↗
15. N.A.M. Kamal, T.M. Tuan Mahmood, I. Ahmad, S. Ramli, Improving rate of gelatin/carboxymethylcellulose dissolving microneedle for transdermal drug delivery, Sains Malays. 49 (9) (2020) 2269-2279. https://doi.org/10.17576/jsm-2020-4909-24.10.17576/jsm-2020-4909-24 ↗
16. Microneedles with controlled bubble sizes and drug distributions for efficient transdermal drug delivery10.1038/srep38755 ↗
17. Polymeric microneedles: an emerging paradigm for advanced biomedical applications10.3390/scipharm91020027 ↗
18. Producing hollow polymer microneedles using laser ablated molds in an injection molding process10.1115/1.4051456 ↗
19. Fabricating high-resolution and high-dimensional microneedle mold through the resolution improvement of stereolithography 3D printing10.3390/pharmaceutics14040766 ↗
20. Microfabricated needles for transdermal delivery of macromolecules and nanoparticles: fabrication methods and transport studies10.1073/pnas.2331316100 ↗
21. Monitoring the penetration process of single microneedles with varying tip diameters10.1016/j.jmbbm.2014.09.015 ↗
22. Morphology design and precision control of microneedles by PμSL 3D printing10.3390/polym17101351 ↗
23. Optimizing microneedle arrays to increase skin permeability for transdermal drug delivery10.1111/j.1749-6632.2009.04083.x ↗
24. 3D printing fabrication process for fine control of microneedle shape10.1186/s40486-022-00165-4 ↗
25. Hydrogel-forming microneedles in the management of dermal disorders through a non-invasive process: a review10.3390/gels10110719 ↗
26. A novel scalable manufacturing process for the production of hydrogel-forming microneedle arrays10.1016/j.ijpharm.2015.08.049 ↗
27. Fabrication of microporous inorganic microneedles by centrifugal casting method for transdermal extraction and delivery10.1016/j.ijpharm.2018.12.089 ↗
28. Vac-and-fill: a micromoulding technique for fabricating microneedle arrays with vacuum-activated, hands-free mould-filling10.1016/j.ijpharm.2023.123706 ↗
29. Study on the fabrication and characterization of tip-loaded dissolving microneedles for transdermal drug delivery10.1016/j.ejpb.2020.10.002 ↗
30. Ultrasonic micro-injection moulding: characterisation of interfacial friction by varying feedstock shape and high-speed thermal imaging for microneedle feature replication10.1007/s00170-024-14078-6 ↗
31. Buckling analysis of hollow microneedle in transdermal drug delivery, Proc. ASME Int
32. The effects of geometry on skin penetration and failure of polymer microneedles10.1080/01694243.2012.705101 ↗
33. Microneedle characterisation: the need for universal acceptance criteria and GMP specifications when moving towards commercialisation, Drug Deliv
34. From simulation to application: enhancing preclinical evaluation of dissolvable microarray patches through PBPK modelling, Drug Deliv
35. Material properties in unconfined compression of gelatin hydrogel for skin tissue engineering applications
36. Cell-laden microengineered gelatin methacrylate hydrogels10.1016/j.biomaterials.2010.03.064 ↗
37. Hyaluronic acid enhances the mechanical properties of tissue-engineered cartilage constructs10.1371/journal.pone.0113216 ↗
38. Dissolving and swelling hydrogel-based microneedles: an overview of their materials, fabrication, characterization methods, and challenges10.3390/gels9100806 ↗
39. Dissolving microneedles developed in association with nanosystems: a scoping review on the quality parameters of these emerging systems for drug or protein transdermal delivery10.3390/pharmaceutics13101601 ↗
40. Mechanical characterization of dissolving microneedles: Factors affecting physical strength of needles10.3390/pharmaceutics16020200 ↗
41. Determination of the mechanical properties of polymeric microneedles by micromanipulation10.1016/j.jmbbm.2021.104384 ↗
42. Insertion of microneedles into skin: measurement and prediction of insertion force and needle fracture force10.1016/j.jbiomech.2003.12.010 ↗
43. A penetration efficiency model for the optimization of solid conical microneedles' geometry10.1088/1361-6439/ad1e36 ↗
44. Insights into the mechanics of solid conical microneedle array insertion into skin using the finite element method10.1016/j.actbio.2021.08.045 ↗
45. Assessing the integrity and mechanical properties of commercial microneedles: innovation or fad?, Drug Deliv
46. Determining the factors affecting dynamic insertion of microneedles into skin10.1007/s10544-019-0449-y ↗
47. In situ microneedle insertion mechanics into an SEM-compatible artificial mechanical skin model
48. Development of artificial skin using keratin film for evaluation of puncture performance of microneedle10.20965/jrm.2020.p0351 ↗
49. Inertial rise of a meniscus on a vertical cylinder10.1017/jfm.2015.89 ↗
50. The meniscus on the outside of a circular cylinder: from microscopic to macroscopic scales10.1016/j.jcis.2018.08.081 ↗
51. The meniscus on the outside of a small circular cylinder10.1017/S0022112074002126 ↗
52. Shape and effective spring constant of liquid interfaces probed at the nanometer scale: Finite size effects10.1021/acs.langmuir.5b02607 ↗
53. What is the optimal geometry of dissolving microneedle arrays? a literature review10.3390/pharmaceutics17010124 ↗
54. Flexible and stretchable microneedle patches with integrated rigid stainless-steel microneedles for transdermal biointerfacing10.1371/journal.pone.0166330 ↗
55. Hard polymeric porous microneedles on stretchable substrate for transdermal drug delivery10.1038/s41598-022-05912-6 ↗
56. Finite element analysis for biodegradable dissolving microneedle materials on skin puncture and mechanical performance evaluation10.3390/polym13183043 ↗
57. Viscoelastic properties of polymeric microneedles determined by micromanipulation measurements and mathematical modelling10.3390/ma16051769 ↗
58. Factors affecting the surface and release properties of thin polydimethylsiloxane films10.1038/pj.2012.227 ↗
59. T.W. Sowers, R. Sarkar, S. Eswarappa Prameela, E. Izadi, J. Rajagopalan, Capillary driven flow of polydimethylsiloxane in open rectangular microchannels, Soft Matter. 12 (26) (2016) 5818-5823. https://doi.org/10.1039/C6SM00897F.10.1039/C6SM00897F ↗
60. Long-term thermal aging of modified Sylgard 184 formulations10.3390/polym13183125 ↗
61. Bioadhesive microneedle patches for tissue sealing10.1002/btm2.10578 ↗
62. W.S. Rasband, ImageJ, v1.54g [software], U.S. National Institutes of Health, Bethesda, MD, USA, 2023.
63. WebPlotDigitizer, v4.7 [software]
64. Epidermal thickness at different body sites: Relationship to age, gender, pigmentation, blood content, skin type and smoking habits10.1080/00015550310015419 ↗
65. Skin structure, physiology, and pathology in topical and transdermal drug delivery10.3390/pharmaceutics16111403 ↗
66. Mechanical properties of graded polydimethylsiloxane for flexible electronics, J10.1088/1742-6596/1150/1/012030 ↗
67. ASTM D575-91(2018), Standard Test Methods for Rubber Properties in Compression, ASTM International, West Conshohocken
68. A cost-effective laboratory device for single slow micro compression testing of soft materials in the small-strain region10.1016/j.ohx.2025.e00738 ↗
69. Polydimethylsiloxane crosslinking kinetics: a systematic study on Sylgard184 comparing rheological and thermal approaches10.1002/app.51013 ↗
70. Thermally accelerated curing of platinum-catalyzed elastomers
71. Puncture mechanics of soft elastomeric membrane with large deformation by rigid cylindrical indenter10.1016/j.jmps.2018.01.002 ↗
72. Puncture of elastomer membranes by medical needles. Part II: Mechanics10.1007/s10704-009-9325-8 ↗
73. Integrated and reusable in-plane microfluidic interconnects10.1016/j.snb.2007.11.024 ↗
74. HPMC/PVP K90 Dissolving Microneedles Fabricated from 3D-printed Master Molds: Impact on Microneedle Morphology, Mechanical Strength, and Topical Dissolving Property10.3390/polym16040452 ↗
75. Study of the fabrication of AISI 316L microneedle arrays10.1016/j.promfg.2018.07.014 ↗
76. Deformation and fracture behavior of physical gelatin gel systems10.1016/j.foodhyd.2016.04.007 ↗
77. Designing viscoelastic gelatin-PEG macroporous hybrid hydrogel with anisotropic morphology and mechanical properties for tissue engineering application10.3390/micro3020029 ↗
78. Contactless vibrational analysis of transparent hydrogel structures using laser-Doppler vibrometry10.1007/s11340-020-00626-0 ↗
79. An analysis of the relationship between microneedle spacing, needle force and skin strain during the indentation phase prior to skin penetration10.1080/10255842.2022.2136486 ↗
80. A comprehensive review of microneedles: Types, materials, processes, characterizations and applications10.3390/polym13162815 ↗
81. Engineering microneedle patches for improved penetration: Analysis, skin models and factors affecting needle insertion10.1007/s40820-021-00611-9 ↗