journal article·2026-06Open access

High-temperature mechanical properties of laser powder bed fusion 304L stainless steel with in-situ oxide inclusions

Yanlin Gu, Zhen Yan, Yuyu Guo, Enxiang Fan, Yuequn Wu, Aijun Huang, Tianju Chen, Juan Hou

Materials & Design· Volume 266

Abstract

• Compared to traditional mechanical alloying (MA), LPBF achieves more uniform oxide dispersion and enables in-situ fabrication of ODS 304L stainless steel by tailoring chamber O 2 (50–1500 ppm). • The 500-ppm sample showed superior properties at 600 °C(YS of ∼294 MPa, UTS of ∼351 MPa, EL of 26%, outperforming reported LPBFed 304L. • The 500-ppm sample shows the longest endurance life (194 h), surpassing the 50-ppm sample by ∼63 h (131 h), while the 1500-ppm one performs poorest (99 h), a 49% drop from 500 ppm. • Stable in-situ SiO 2 nano-oxides (∼22 nm at 500 ppm) key to enhancement: pin dislocations, suppress grain coarsening, synergize with ultrafine cells (∼400 nm) and twins for high-temperature stability. • The unique microstructure induced by LPBF incorporates multiple strengthening mechanisms, 500 ppm’s superior YS over 1500 ppm due to stable cells and high-density dislocations. Laser powder bed fusion (LPBF) provides an innovative strategy for in-situ generation of nanoscale oxide dispersoids, benefiting matrix compatibility and mechanical performance. This study systematically investigates the microstructure and high-temperature mechanical behavior of LPBFed 304L stainless steel (SS) by tailoring chamber oxygen content (50, 500, 1500 ppm), observing that the 500-ppm sample exhibited superior properties at 600 °C, with a yield strength (YS) of ∼294 MPa, an ultimate tensile strength (UTS) of ∼351 MPa, an elongation (EL) of 26%, and a durability of 194 h (600 °C, 225 MPa). These improvements are attributed to the stable oxide particles that effectively pin dislocations and suppress grain coarsening during deformation. Compared to traditional mechanical alloying (MA), LPBF achieves uniform oxide dispersion, outperforming methods in both mechanical strength and microstructural stability. This work demonstrated that LPBF as a robust technique for fabricating high-reliability ODS alloys, offering promising applications in nuclear core structural components.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Nuclear Materials and Properties · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Enhanced oxidation resistance of nanocrystalline ODS ferritic alloy in high-temperature steam through addition of a small amount of Si10.1016/j.corsci.2025.112906 ↗
2. A comparison study of change in hardness and microstructures of a Zr-added FeCrAl ODS steel irradiated with heavy ions10.1016/j.msea.2022.143050 ↗
3. Cyclic stress-strain response of the ODS nickel-base, superalloy PM 1000 under variable amplitude loading at high temperatures10.1016/S0921-5093(99)00739-X ↗
4. N.K. Angermann H H, Aono Y, et al.,Evolution of oxides on Ni-base ODS superalloys, Oxid. Met. 48(1997)1-39.10.1007/BF01675260 ↗
5. Selective laser melting of nano-TiB decorated AlSi10Mg alloy with high fracture strength and ductility10.1016/j.actamat.2017.02.062 ↗
6. Microstructure characteristics and its formation mechanism of selective laser melting SiC reinforced Al-based composites10.1016/j.vacuum.2018.11.022 ↗
7. A heat treatable TiB/Al-3.5Cu-1.5Mg-1Si composite fabricated by selective laser melting: microstructure, heat treatment and mechanical properties10.1016/j.compositesb.2018.04.026 ↗
8. Additive manufacturing of oxide-dispersion strengthened alloys: materials, synthesis and manufacturing10.1016/j.pmatsci.2022.101049 ↗
9. Recent developments in irradiation-resistant steels10.1146/annurev.matsci.38.060407.130315 ↗
10. S. Ukai, S. Ohtsuka, T. Kaito, Y. de Carlan, J. Ribis, J. Malaplate, Oxide dispersion-strengthened/ferrite-martensite steels as core materials for Generation IV nuclear reactors, Struct. Mater. Gen. IV. Nucl. React. (2017),357-414.10.1016/B978-0-08-100906-2.00010-0 ↗
11. On the nanoscale oxide dispersion via in-situ atmospheric oxidation during laser powder bed fusion10.1016/j.jmatprotec.2023.118191 ↗
12. Effect of heat treatment on the microstructure, mechanical properties and corrosion resistance of selective laser melted 304L stainless steel10.1007/s40195-022-01430-6 ↗
13. Microstructure, tensile properties and mechanical anisotropy of selective laser melted 304L stainless steel10.1016/j.jmst.2020.01.011 ↗
14. Thermal stability of additively manufactured austenitic 304L ODS alloy10.1016/j.jmst.2020.12.033 ↗
15. Tensile behaviour of 316LN stainless steel at elevated temperatures10.1179/1878641314Y.0000000014 ↗
16. Microstructure development in mechanically alloyed yttria dispersed austenitic steels10.1016/j.actamat.2008.12.026 ↗
17. Effect of microalloying on precipitate evolution in ferritic welds and implications for toughness10.1016/j.actamat.2009.09.056 ↗
18. Alternative fabrication routes toward oxide-dispersion-strengthened steels and model alloys10.1007/s11661-016-3616-2 ↗
19. Effect of recrystallization on ion-irradiation hardening and microstructural changes in 15Cr-ODS steel10.1016/j.nimb.2015.07.076 ↗
20. Effects of aluminum on microstructure and mechanical behavior of 14Cr-ODS steels10.1016/j.jnucmat.2014.12.079 ↗
21. Insights into the effects of oxygen content regulation on the microstructure and mechanical properties of in situ ODS 304 L stainless steel processed by laser powder bed fusion10.1007/s41365-025-01677-5 ↗
22. Creep and creep damage behavior of stainless steel 316L manufactured by laser powder bed fusion
23. Tensile and creep testing of sanicro 25 using miniature specimens10.3390/ma11010142 ↗
24. R.B. Ávila Calderón L.A., Schriever S, Creep and creep damage behavior of stainless steel 316L manufactured by laser powder bed fusion, Mater. Sci. Eng. A.,830 (2022).10.1016/j.msea.2021.142223 ↗
25. Abdulrahman. J, Ebhota.S. W, Tabakov.Y. P, Experimental and Numerical Calibration of Mechanical Properties for Banana Fiber‐Reinforced Polymer Composites, Polym. Compos, 46(2025)16794-16807.10.1002/pc.70072 ↗
26. ARZT. E, Size effects in materials due to microstructural and dimensional constraints:A comparative review, Acta. Mater. 46(1998)5611-5626.10.1016/S1359-6454(98)00231-6 ↗
27. Investifation of microstructure evolution and its effect mechanism on high temperature tensile properties of 304L stainless steel processed by laser powder bed fusion
28. The tensile behaviors of vanadium-containing 25Cr-20Ni austenitic stainless steel at temperature between 200 °C and 900 °C10.1016/j.msea.2017.11.066 ↗
29. The effect of M23C6 on the high-temperature tensile strength of two austenitic heat-resistant steels: 22Cr-25Ni-Mo-Nb-N and 25Cr-20Ni-Nb-N10.1016/j.msea.2011.01.079 ↗
30. Microstructure evolution and tensile property of high entropy alloy particle reinforced 316L stainless steel matrix composites fabricated by laser powder bed fusion10.1016/j.jallcom.2023.171430 ↗
31. Selective laser melting of austenitic oxide dispersion strengthened steel: processing, microstructural evolution and strengthening mechanisms10.1016/j.msea.2020.139532 ↗
32. Microstructure and corrosion performance of laser powder bed fusion produced duplex stainless steel using Ni over-alloyed mixed powder10.1016/j.corsci.2025.113025 ↗
33. Fracture behavior of heterogeneous nanostructured 316L austenitic stainless steel with nanotwin bundles10.1016/j.actamat.2018.02.065 ↗
34. Role of thermally-stable deformation twins on the high-temperature mechanical response of an austenitic stainless steel10.1016/j.msea.2022.143199 ↗
35. On the thermal coarsening and transformation of nanoscale oxide inclusions in 316L stainless steel manufactured by laser powder bed fusion and its influence on impact toughness10.1016/j.msea.2022.142690 ↗
36. Influence of processing temperature on the microstructures and tensile properties of 304L stainless steel by ECAP10.1016/j.msea.2007.08.067 ↗
37. Z. Zhu, W. Li, Q. B. Nguyen, X. An, W. Lu, Z. Li, F. Ng, S. M. L. Nai, J. Wei. Enhanced strength–ductility synergy and transformation-induced plasticity of the selective laser melting fabricated 304L stainless steel[J].Addit. Manuf. 35(2020)101300.10.1016/j.addma.2020.101300 ↗
38. Mechanical performance and deformation mechanisms at cryogenic temperatures of 316L stainless steel processed by laser powder bed fusion: in situ neutron diffraction10.1016/j.scriptamat.2022.114806 ↗
39. Effect of acicular ferrite on mechanical properties of hot-rolled ultra-fine grain microalloyed steels
40. ANSYS Mechanical APDL Theory Reference. Theory statistics retrieved from, (2021).
41. Use of the Gibbs-Thompson relation to obtain the interfacial energy of δ′ precipitates in Al-Li alloys10.1016/S0921-5093(99)00034-9 ↗
42. Ostwald ripening in nanoalloys: when thermodynamics drives a size-dependent particle composition10.1103/PhysRevLett.105.255901 ↗
43. Ostwald ripening mechanism and its development in binary alloys10.12677/MP.2022.122003 ↗
44. Dislocation-climbing bypass over dispersoids with different lattice misfit in creep deformation of FeCrAl oxide dispersion-strengthened alloys10.1016/j.jmrt.2021.11.123 ↗
45. Oxide particle refinement in Ni-based ODS alloy10.1016/j.msea.2015.09.094 ↗
46. Z.Y. Fu X, Li J, et al. ,Uncertainty and statistics of dislocation-oxide interactions on strength and creep failure of oxide dispersion strengthened steels, Eng. Fract. Mech. 293 (2023)109679.10.1016/j.engfracmech.2023.109679 ↗
47. Correlation between chemical composition and size of very small oxide particles in the MA957 ODS ferritic alloy10.1016/j.jnucmat.2008.11.001 ↗
48. Dymáček P ,Jarý M ,Dobeš F , et al.Tensile and Creep Testing of Sanicro 25 Using Miniature Specimens[J].Materials,2018,11(1):142-142.DOI:10.3390/ma11010142.10.3390/ma11010142 ↗
49. Strain-hardening in nano-structured single phase steels: mechanisms and control10.1166/jnn.2012.6474 ↗
50. Experimental characterization and strengthening mechanism of process-structure-property of selective laser melted 316 L10.1016/j.matchar.2023.112753 ↗
51. High temperature properties of an austenitic stainless steel10.1088/1742-6596/240/1/012071 ↗
52. Microstructures and tensile properties of an austenitic ODS heat resistance steel10.1016/j.msea.2019.138419 ↗
53. Austenitic stainless steel strengthened by the in situ formation of oxide nanoinclusions10.1039/C4RA16721J ↗
54. Fabrication and characterization of oxide dispersion strengthened (ODS) 14Cr steels consolidated by means of hot isostatic pressing, hot extrusion and spark plasma sintering10.1016/j.jnucmat.2015.09.036 ↗
55. Structure and mechanical properties of Fe-Ni-Zr oxide-dispersion-strengthened (ODS) alloys10.1016/j.jnucmat.2015.09.011 ↗
56. Effect of annealing treatment on microstructure evolution and deformation behavior of 304 L stainless steel made by laser powder bed fusion10.1016/j.ijplas.2022.103335 ↗
57. Exploring the correlation between the austenite yield strength and the bainite lath thickness10.1016/j.msea.2018.06.041 ↗
58. Revealing the strain-hardening behavior of twinning-induced plasticity steels: theory, simulations10.1016/j.actamat.2012.09.064 ↗
59. Optimizing the microstructural and mechanical isotropy for the twin-wire directed energy deposition-arc fabricated Ti-48Al-2Cr-2Nb alloy via interpass remelting
60. Devising strain hardening models using kocks–mecking plots—a comparison of model development for titanium aluminides and case hardening steel10.3390/met6090204 ↗
61. An overview of high yield strength twinning-induced plasticity steels10.3390/met11010124 ↗