journal article·2026-05Open access

Mechanical properties and hot forming potential of micro-perforated titanium sheets for laminar flow control structures

Nikolai Kashaev, Volker Ventzke, Falk Dorn, Benjamin Klusemann, Noomane Ben Khalifa, Werner Beck, Sabine Wagner, Rubén Escribano García, Pedro Álvarez Moro

Materials & Design· Volume 265

Abstract

This study investigates the tensile behavior and microstructural evolution along manufacturing stages of commercially pure titanium grade 2 sheets with laser-induced micro-perforations, developed for application in hybrid laminar flow control (HLFC) aerospace structures. Micro-perforated specimens with two different pitch configurations were tested in multiple directions relative to the rolling direction to evaluate the influence of hole density and crystallographic texture on mechanical properties. Microstructural analysis via EBSD revealed a typical recrystallized α-phase structure with marked crystallographic texture leading to orientation-dependent deformation behavior. The presence of micro-perforations results in a moderate decrease in ductility, with strength largely retained across directions, particularly for micro-perforation pattern with 1.0 mm pitch. Fractographic analysis confirmed ductile transcrystalline fracture mechanisms, with dimple structures evident in ligament regions between hole lines. Additionally, the hot forming of micro-perforated sheets into a complex HLFC demonstrator geometry at 715 °C caused noticeable grain coarsening and changes in micro-texture. Mechanical testing post-forming revealed a reduction in both strength and fracture strain, attributed to thermal oxidation and microstructural evolution. Nevertheless, the mechanical properties after hot forming could be approximated using proportional reductions from room temperature data, with deviations within 5%. These findings demonstrate that micro-perforated titanium grade 2 retains favorable mechanical properties under HLFC-relevant manufacturing conditions, supporting its use in next-generation aircraft structures
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Additive Manufacturing Materials and Processes · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. F. Collier, An overview of recent subsonic laminar flow control flight experiments, in: 23rd Fluid Dynamics, Plasmadynamics, and Lasers Conference, Orlando, 1993. doi:10.2514/6.1993-2987.10.2514/6.1993-2987 ↗
2. Cruz Palacios, Performance and economic assessment of a wing-integrated hybrid laminar flow control system10.1017/aer.2025.26 ↗
3. A novel technique to join electron beam perforated metallic sheets to core structures in the design of hybrid laminar flow control suction panels
4. Design, manufacturing and experimental validation of an integrated wing ice protection system in a hybrid laminar flow control leading edge demonstrator10.3390/app16031347 ↗
5. Investigation of hybrid laminar flow control (HLFC) surfaces10.1016/S1369-8869(01)00010-6 ↗
6. Status and perspectives of laminar flow10.1017/S000192400000097X ↗
7. D. Daandels, S. Riekehr, N. Kashaev, et al., A modeling approach for the fatigue behavior of laser drilled micro perforated structural panels, in: A. Niepokolczycki, J. Komorowski (Eds), ICAF 2019 – Structural Integrity in the Age of Additive Manufacturing. ICAF 2019. Lecture Notes in Mechanical Engineering. Springer, Cham, 2020. doi:10.1007/978-3-030-21503-3_6.10.1007/978-3-030-21503-3_6 ↗
8. High speed laser micro drilling for aerospace applications10.1016/j.procir.2014.08.002 ↗
9. Fiber laser based single pulse drilling for production of perforated titanium sheets for HLFC structures
10. Application and features of titanium for the aerospace industry, Nippon Steel Simitomo Metal
11. Assessment of alternative joining techniques for Ti–6Al–4V/CFRP hybrid joints regarding tensile and fatigue strength10.1016/j.matdes.2015.04.051 ↗
12. Erosion corrosion of commercially pure titanium and Ti-6Al-4V alloy in sodium chloride solutions with and without suspended solids10.61927/igmin284 ↗
13. Tolerance driven lightweight design and interface robustness of multi-material aircraft horizontal tail structures10.1038/s41598-026-35265-3 ↗
14. Finite element modeling of quasi-static failure of aluminum joints with titanium bolts and liquid shim10.1016/j.engfailanal.2024.108083 ↗
15. Lütjering · 2007
16. Chapter 9: Titanium alloys for aerospace structures and engines
17. Boyer · 1994
18. Schijve · 2009
19. An overview of fatigue in aircraft structures10.1111/ffe.12631 ↗
20. R. Escibano, S. Wagner, W. Beck, A. Nagendra, D3.1: Small-scale demonstrators, in: EU Project: Forming of Microperforated Outer Skin of HLFC Wings Assisted by FEM Simulation/MICROFORM, Topic/Call: JTI-CS2-2019-CFP10-LPA-01-83, Grant Agreement No.: 886409, (2023), https://cordis.europa.eu/project/id/886409/results, accessed on 27.01.2025.
21. Commercially Pure. Annealed 40.0 ksi (276 MPa) Yield Strength
22. Texture analysis in hexagonal materials10.1016/S0254-0584(03)00168-8 ↗
23. Effect of crystallographic texture on ratcheting response of commercially pure titanium10.1016/j.matdes.2016.11.052 ↗
24. Anisotropic deformation behavior under various strain paths in commercially pure titanium Grade 1 and Grade 2 sheets10.1016/j.msea.2015.12.081 ↗
25. Deformation anisotropy and associated mechanisms in rolling textured high purity titanium10.1016/j.jallcom.2015.08.075 ↗
26. Influence of crystallographic texture on the microstructure, tensile properties and residual stress state of laser-welded titanium joints10.1016/j.matdes.2016.03.148 ↗
27. G. Lütjering, J.C. Williams, A. Gysler. Chapter 1: Microstructure and mechanical properties of titanium alloys, in: J.C.M. Li (Ed.), Microstructure and Properties of Materials, Volume 2, World Scientific Publishing Co Pte Ltd., Singapore, 2000, pp. 1-77. doi:10.1142/9789812793959_0001.10.1142/9789812793959_0001 ↗
28. Crystal plasticity modeling of deformation and creep in polycrystalline Ti-6242, Metal10.1007/s11661-006-0082-2 ↗
29. Gottstein · 2007
30. The Appearance of Cracks and Fractures in Metallic Materials, second ed., Verlag Stahleisen mbH, Düsseldorf, 1996.
31. DIN EN ISO 10113. Metallic materials – Sheet and strip – Determination of plastic strain ratio (ISO 10113:2020, Corrected version 2020-11); German version EN ISO 10113:2020. International Organization for Standardization, Geneva, 2020.
32. Work hardening of dispersion-hardened crystals10.1080/14786436608224282 ↗
33. Material saving and cost reduction with hot forming of U-shaped titanium part10.1002/mawe.201400292 ↗
34. Microstructure and strength of titanium after heat treatment at different temperatures in the range of 680-1000°C