A multiphysics–multiscale model of Portland cement hydration predicting temporal evolution of microstructure and strength-relevant properties
Source abstract
Abstract
Portland cement strength is governed by hydration properties including heat flow, hydration degree, porosity, pore size distribution, portlandite content, ratio of calcium to silicon, and mean chain length. However, no existing model theoretically predicts all these parameters by considering the hydration time. In this study, a multiphysics–multiscale model was developed to quantify their temporal evolution by integrating dissolution–precipitation kinetics among minerals, hydrated products, and mobile ions while coupling chemical, electric, and thermal fields via Poisson–Nernst–Planck equations and heat conduction theory. The relationships between the hydration properties and phase composition were elucidated. The model was validated against experimental data and published literature, quantifying early-stage hydration dynamics and revealing dependencies on the water-to-cement ratio and gypsum content. This model enables the development of a cement strength model through fundamental hydration process control.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete Properties and Behavior · Concrete and Cement Materials Research · Composite Material Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (78)
Show source-provided references
1. Optimization of fiber aspect ratio for 90MPa strain-hardening geopolymer composites (SHGC) with a tensile strain capacity over 7.5%
2. From physics to chemistry of fresh blended cements
3. Effect of Strain rates on the Stress–Strain Behavior of FRP-Confined Pre-Damaged Concrete10.3390/ma13051078 ↗
4. FRP-confined rubber concrete with effect of strain rate: Tests and analysis-oriented stress–strain model
5. Geometrically Nonlinear Analysis of Long Span Composite Girder Cable-Stayed Bridge with three Towers under Live load10.4028/www.scientific.net/AMM.34-35.371 ↗
6. Moment redistribution in two-span prestressed NSC and HSC beams10.1617/s11527-017-1116-5 ↗
7. Nonlinear Stability Analysis of a Composite Girder Cable-Stayed Bridge with three Pylons during Construction
8. Risk Assessment Method for Cable System Construction of Long-Span Suspension Bridge based on Cloud Model
9. Effect of the hydration temperature on the pore structure of cement paste: Experimental investigation and micromechanical modelling10.1016/j.cemconres.2018.06.014 ↗
10. Early hydration of SCM-blended Portland cements: a pore solution and isothermal calorimetry study10.1016/j.cemconres.2016.11.013 ↗
11. Hydration of C3S and Al-doped C3S in the presence of gypsum
12. Study on hydration reaction and structure evolution of cemented paste backfill in early-age based on resistivity and hydration heat
13. Electromagnetic radiation response from cement paste: a tool to monitor hydration and extent of deformation10.1080/21650373.2018.1506369 ↗
14. Inverse modeling deduction of pore distribution in cement materials from capillary absorption features
15. Microstructure and microanalysis of portland cement pastes with high w/c ratios
16. Microstructure of cement paste incorporating high volume of low-grade metakaolin
17. Densification of C-S-H is mainly driven by available precipitation space, as quantified through an analytical cement hydration model based on NMR data10.1016/j.cemconres.2016.04.006 ↗
18. A New Approach to Modeling the Nucleation and Growth Kinetics of Tricalcium Silicate Hydration10.1111/j.1551-2916.2007.01858.x ↗
19. µic: a new platform for modelling the hydration of cements10.1016/j.cemconres.2008.12.002 ↗
20. K.v. Breugel, Numerical simulation of hydration and microstructural development in hardening cement-based materials (I) theory, Cement and Concrete Research 25(2) (1995) 319-331.10.1016/0008-8846(95)00017-8 ↗
21. K.v. Breugel, Numerical simulation of hydration and microstructural development in hardening cement-based materials: (II) applications, Cement and Concrete Research 25(3) (1995) 522-530.10.1016/0008-8846(95)00041-A ↗
22. An Advanced Single Particle Model for C3S and Alite Hydration10.1111/j.1551-2916.2010.04352.x ↗
23. A three-dimensional microstructural model of reactions and transport in aqueous mineral systems10.1088/0965-0393/15/7/002 ↗
24. A Multi-Ionic Continuum-based Model for C3S Hydration10.1111/jace.13703 ↗
25. Hydration of slag-blended cements10.1016/j.cemconcomp.2012.05.007 ↗
26. Role of ionic diffusion in heat flow and chemical shrinkage of tricalcium aluminate hydration subjected to thermo-chemo-electrical coupled fields10.1016/j.jmrt.2023.02.125 ↗
27. Hydration kinetics of Portland cement shifting from silicate to aluminate dominance based on multi-mineral reactions and interactions
28. A multiphysics-multiscale-multidrive theoretical model for C3S hydration10.1016/j.ceramint.2022.09.071 ↗
29. Resistance of carbonation-cured belite-rich cement mortar to adverse environments: Magnesium sulfate and sulfuric acid exposure
30. The microstructural change of C-S-H at elevated temperature in Portland cement/GGBFS blended system
31. Hydration of ternary Portland cement blends containing metakaolin and sodium bentonite
32. Hydration kinetics, pore structure, 3D network calcium silicate hydrate, and mechanical behavior of graphene oxide reinforced cement composites10.1016/j.conbuildmat.2018.09.105 ↗
33. Influence and mechanism of micro/nano-mineral admixtures on the abrasion resistance of concrete10.1016/j.conbuildmat.2018.11.224 ↗
34. Experimental study and mechanism analysis of functional nanocrystalline cellulose to improve the electromagnetic transmission performance of ordinary Portland cement
35. Heat of Hydration Models for Cementitious Materials
36. A model for a long-term diffusion of multispecies in concrete based on ion–cement-hydrate interaction10.1007/s10853-013-7239-3 ↗
37. Thermodynamic equilibrium calculations in cementitious systems10.1617/s11527-010-9592-x ↗
38. Modelling early age hydration kinetics of alite10.1016/j.cemconres.2012.03.003 ↗
39. External sulfate attack of cementitious materials: New insights gained through numerical modeling including dissolution/precipitation kinetics and surface complexation10.1016/j.cemconcomp.2017.07.024 ↗
40. Numerical solution of the Extended Nernst–Planck Model10.1006/jcis.1999.6145 ↗
41. Bridging the gap between NMR measured mean silicate chain length and nano-scale silicate polymorphism of calcium silicate hydrates
42. Calcium silicate hydrates: Solid and liquid phase composition10.1016/j.cemconres.2015.03.019 ↗
43. H.F.W.Taylor, Cement chemistry, Thomas Telford Services Ltd, New York, 1990.
44. Deeper Insights into a Bioactive Glass Nanoparticle Synthesis Protocol to Control its Morphology10.1021/acsomega.8b03598 ↗
45. An electrochemical model to characterize the chloride ion ingress in multi-phase concrete with the effect of ionic solution
46. A new model for investigating the formation of interfacial transition zone in cement-based materials
47. Importance of adsorption compared with complexation for retarding C3S hydration via adding sodium gluconate
48. A COMSOL-PHREEQC interface for modeling the multi-species transport of saturated cement-based materials10.1016/j.conbuildmat.2018.07.242 ↗
49. A diffusion-reaction model for sulfate ion corrosion in multi-phase concrete immersed in ionic solution10.1016/j.ceramint.2022.12.288 ↗
50. On the first principle theory of nanogenerators from Maxwell's equations
51. A multiphysics-multiscale-multidrive theoretical model for C3S hydration10.1016/j.ceramint.2022.09.071 ↗
52. Micro- and meso-mechanical modeling of effect of freezing on modulus of elasticity of concrete10.1016/j.engfracmech.2018.08.013 ↗
53. A Theoretical Packing Density Model (TPDM) for ordered and disordered packings10.1016/j.powtec.2018.12.033 ↗
54. Hydration of fly ash cement10.1016/j.cemconres.2004.09.008 ↗
55. Model structures for C-(a)-S-H(I)10.1107/S2052520614021982 ↗
56. Microstructural Evolution Mechanism of C-(a)-S-H Gel in Portland Cement Pastes Affected by Sulfate Ions, Journal of Wuhan University of Technology-Mater
57. A suite of second-order composite sub-step explicit algorithms with controllable numerical dissipation and maximal stability bounds10.1016/j.apm.2022.10.012 ↗
58. Advances in understanding cement hydration mechanisms
59. C. Atzeni, L. Massidda, U. Sanna, Effect of pore size distribution on strength of hardened cement pastes, Proceedings of the First International RILEM Congress on Pore Structure and Material Properties, Paris, 1987, pp. 195–202.
60. Understanding hydrogen bonding in calcium silicate hydrate combining solid-state NMR and first principle calculations
61. Hydration of Portland cements in solutions containing high concentration of borate ions: Effects of LiOH10.1016/j.cemconcomp.2019.04.010 ↗
62. Investigating the role of reactive silica in the hydration mechanisms of high-calcium fly ash/cement systems10.1016/j.cemconcomp.2004.02.004 ↗
63. Effect of alkali hydroxide on calcium silicate hydrate (C-S-H)
64. Porosity, pore size distribution and in situ strength of concrete10.1016/S0008-8846(02)00942-0 ↗
65. Effect and characterization of the nucleation C-S-H seed on the reactivity of granulated blast furnace slag powder
66. The nature of C-S-H in hardened cements10.1016/S0008-8846(99)00168-4 ↗
67. Hydration of polyphase Ca3SiO5‐Ca3Al2O6 in the presence of gypsum and Na2SO410.1111/jace.17321 ↗
68. The impact of carbonation at different CO2 concentrations on the microstructure of phosphogypsum-based supersulfated cement paste10.1016/j.conbuildmat.2022.127823 ↗
69. Advances in hydration and thermodynamics of cementitious systems
70. Modelisation of chloride reactive transport in concrete including thermodynamic equilibrium, kinetic control and surface complexation10.1016/j.cemconres.2018.05.007 ↗
71. Chemical model for cement-based materials: Temperature dependence of thermodynamic functions for nanocrystalline and crystalline C–S–H phases10.1016/j.cemconres.2009.12.004 ↗
72. Solubility and characterization of synthesized 11Å Al-tobermorite
73. Phase stabilities and thermodynamic properties of crystalline phases in CaO–SiO2–H2O above 100°C
74. Numerical simulation and experimental corroboration of galvanic corrosion of mild steel in synthetic concrete pore solution10.1016/j.cemconcomp.2019.04.027 ↗
75. Long term assessment of the geochemical integrity of offshore wellbore cement– results from numerical modeling
76. Z. Meng, Q.f. Liu, J. Xia, Y. Cai, X. Zhu, Y. Zhou, L. Pel, Mechanical–transport–chemical modeling of electrochemical repair methods for corrosion-induced cracking in marine concrete, Computer-Aided Civil and Infrastructure Engineering 37(14) (2022) 1854-1874.10.1111/mice.12827 ↗
77. Carbonation and self-healing in concrete: Kinetic Monte Carlo simulations of mineralization
78. Microanalysis and optimization-based estimation of C–S–H contents of cementitious systems containing fly ash and silica fume10.1016/j.cemconcomp.2011.09.008 ↗