Influence of die-shift-distance of overhang dies on residual thermal shear stress in 5-chip SiP after EMC curing
Source abstract
Abstract
Abstract This paper investigates the effects of the die-shift-distance (DSD) of overhang dies on residual thermal shear stress and warpage in a 5-chip stacked-die system-in-packaging (SDSiP) implementation. The proposed 5-chip SDSiP includes a single microprocessor (chip 1) and four pieces of dynamic random access memory (chips 2 to 5) with chip 4 stacked atop chip 2 and chip 5 stacked atop chip 3. Computer software based on finite element method (ANSYS) in conjunction with the measured material properties made it possible to obtain the shear stress, shear strain, warpage, and shear strain energy density (U0) within the chips in the 5-chip SDSiP. We also conducted experiments to obtain the interfacial shear stress as well as U0 between the EMC and die, which was compared with the numerical U0. When the DSD exceeded 0.4 mm, the position of maximum shear stress at EMC/die interface in the 5-chip SDSiP changed from chip 4 to chip 1 due to a decrease in the rigidity of the stacked dies. Maximum warpage in the 5-chip SDSiP appeared in the top-left corner with movement in a downward direction. This effect can be attributed to mismatch in the CTE among the various materials in the 5-chip SDSiP.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: 3D IC and TSV technologies · Electronic Packaging and Soldering Technologies · Electromagnetic Compatibility and Noise Suppression
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Board level solder joint reliability analysis of stacked die mixed flip-chip and wirebond BGA10.1016/j.microrel.2006.01.010 ↗
2. Analysis of encapsulation process in 3D stacked chips with different microbump array10.1016/j.icheatmasstransfer.2012.10.007 ↗
3. Development of a novel stack package to fabricate high density memory modules for high-end application10.1016/j.microrel.2010.04.025 ↗
4. An investigation into warpages, stresses and keep-out zone in 3D through-silicon-via DRAM packages10.1016/j.microrel.2014.08.017 ↗
5. An approach of numerical multi-objective optimization in stacked packaging10.1016/j.microrel.2008.04.010 ↗
6. Effects of TSVs (through-silicon vias) on thermal performances of 3D IC integration system-in-package (SiP)10.1016/j.microrel.2012.04.002 ↗
7. Reliability challenges in 3D IC packaging technology10.1016/j.microrel.2010.09.031 ↗
8. Effect of laminated wafer toward dicing process and alternative double pass sawing method to reduce chipping10.1109/TEPM.2005.862625 ↗
9. Reliability evaluation of BOAC and normal pad stacked-chip packaging using low-K wafers10.1016/j.microrel.2007.07.013 ↗
10. A novel robust and low cost stack chips package and its thermal performance10.1109/6040.846644 ↗
11. Proceeding of the 2013 IEEE 15th Electronics Packaging Technology Conference (EPTC 2013)
12. Proceeding of the 2013 IEEE 15th Electronics Packaging Technology Conference (EPTC 2013)
13. Proceeding of the 2013 IEEE 15th Electronics Packaging Technology Conference (EPTC 2013)
14. Investigation of the characteristics of overhang bonding for 3-D stacked dies in microelectronics packaging10.1016/j.microrel.2011.06.005 ↗
15. Impact of the number of chips on the reliability of the solder balls for wire-bonded stacked-chip ball grid array packages10.1016/j.microrel.2005.06.011 ↗
16. Investigation of moisture-induced failures of stacked-die package10.1016/j.microrel.2007.07.014 ↗
17. Fracture analysis on die attach adhesives for stacked packages based on in-situ testing and cohesive zone model10.1016/j.microrel.2013.04.001 ↗
18. Study of thinned Si wafer warpage in 3D stacked wafers10.1016/j.microrel.2010.05.006 ↗
19. A novel approach for generating boundary conditions independent compact dynamic thermal networks of packages10.1109/TCAPT.2005.859742 ↗
20. Analytical solution for steady-state and transient temperature fields in vertically stacked 3-D integrated circuits10.1109/TCPMT.2012.2213820 ↗
21. Fast convolution based thermal model for 3D-ICs: methodology, accuracy analysis and package impact10.1016/j.mejo.2014.04.044 ↗
22. A novel simulation methodology for full chip-package thermo-mechanical reliability investigations10.1016/j.mejo.2013.12.009 ↗
23. Plastic ratcheting induced cracks in thin film structures10.1016/S0022-5096(01)00113-2 ↗
24. Study of inter-laminar shear stress of composite structures
25. Sperling · 2006
26. High-temperature reliability of flip chip assemblies10.1016/j.microrel.2005.06.004 ↗
27. Proceeding of the 2013 IEEE 15th Electronics Packaging Technology Conference (EPTC 2013)
28. A low-viscosity, highly thermally conductive epoxy molding compound (EMC)
29. Comparison of experimental methods for the extraction of the elastic modulus of molding compounds used in IC packaging10.1016/j.microrel.2012.06.024 ↗
30. The roles of DNP (distance to neutral point) on solder joint reliability of area array assemblies10.1108/09540919710800674 ↗
31. Non-destructive laboratory-based X-ray diffraction mapping of warpage in Si die embedded in IC packages10.1016/j.mee.2013.12.020 ↗