Research on ballistic performance of green shear thickening functionalized fabric based on solid waste modification
Source abstract
Abstract
Based on the solid waste-based modification, green shear-thickening functionalized ballistic composites were prepared. Silica aerosols were obtained from solid waste diatomaceous earth through sol–gel preparation, gel aging, and supercritical drying. The modified silica aerosols acted as the dispersed phase, regulating the green shear-thickening liquid. A comparison was made between the performance of the modified shear-thickening liquid (SG@STF) and traditional shear-thickening liquids. By modifying solid waste based shear thickener (SG@STF) Combined with aramid fabric (AF) to test Ballistic performance. Characterization tests revealed that the rheological properties of SG@STF were significantly enhanced by increasing the volume fraction of the dispersed phase in STF from 50 % to 60 %. This enhancement was attributed to the addition of reactive functional groups on the surface of the silica sol. Yarn pull-out tests demonstrated that SG@STF/AF improved the tensile strength by 120 % compared to AF fabric, thanks to its superior friction properties. Ballistic tests showed that SG@STF increased the ballistic ultimate velocity of AF fabric by 105 %, elevating AF’s ballistic limiting velocity from 51 m/s to 105 m/s. Consequently, SG@STF/AF exhibited superior ballistic properties compared to AF fabric. The doping of SG enhanced the friction between yarns and increased the load-bearing area of the fabrics, thereby improving the ballistic properties of SG@STF/AF and achieving the desired modulation of their ballistic properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Textile materials and evaluations · Natural Fiber Reinforced Composites · Dyeing and Modifying Textile Fibers
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Effect of Surface Modification of Silica Nanoparticles with Thiol group on the Shear Thickening Behaviors of the Suspensions of Silica Nanoparticles in polyethylene glycol (PEG)10.1088/1757-899X/1225/1/012053 ↗
2. Effects of UV sensitivity and accelerated photo-aging on stab resistance of ρ-aramid fabrics impregnated with shear thickening fluids (STFs)
3. Enhanced sandwich structure composite with shear thickening fluid and thermoplastic polyurethanes for High-performance stab resistance10.1016/j.compstruct.2021.114930 ↗
4. Direct microencapsulation of Ionic-Liquid-Based shear thickening fluid via rheological behavior transition for functional applications10.1016/j.cej.2022.140819 ↗
5. Modification of polyester fabrics with Zn2SnO4 nanorods for superior self-cleaning, UV-protection and antibacterial performance10.1080/00405000.2022.2105119 ↗
6. Ballistic performance and protection mechanism of aramid fabric modified with polyethylene and graphene10.1016/j.ijmecsci.2022.107772 ↗
7. Designing of hybrid soft body armour using high-performance unidirectional and woven fabrics impregnated with shear thickening fluid10.1016/j.compstruct.2020.112776 ↗
8. Effect of carbon nanotubes modification on bending fatigue properties of carbon fiber reinforced polyimide composites10.1016/j.ijfatigue.2023.107814 ↗
9. Effects of ZnO nanowire and silica coatings on the inter-yarn friction and ballistic properties of Kevlar fabrics
10. Intelligent body armor: Advanced Kevlar based integrated energy devices for personal safeguarding10.1016/j.compositesa.2022.107083 ↗
11. Temperature induced gelation transition of a fumed silica/PEG shear thickening fluid10.1039/C4RA16261G ↗
12. Discontinuous shear thickening in the presence of polymers adsorbed on the surface of calcium carbonate particles10.1007/s00397-017-1005-4 ↗
13. Effects of nano-fumed silica and carbonyl iron powder of different particle sizes on the rheological properties of shear thickening fluids10.1007/s00396-023-05087-0 ↗
14. Influence of carrier fluid on the electrokinetic and rheological properties of shear thickening fluids10.1016/j.ceramint.2017.06.092 ↗
15. Shear-thickening behavior of modified silica nanoparticles in polyethylene glycol10.1007/s11051-012-0747-2 ↗
16. Modification of hedgehog-like structured carbon nanohorns to promote flame retardant synergistic effect in assembled coatings for protective cotton fabrics10.1016/j.polymdegradstab.2023.110408 ↗
17. Heydari · 2023 · 401
18. Flexible and lightweight Kevlar composites towards flame retardant and impact resistance with excellent thermal stability10.1016/j.cej.2022.139565 ↗
19. Evaluation of ballistic performance of STF impregnated fabrics under high velocity impact10.1016/j.compstruct.2019.111208 ↗
20. Impact characteristics of soft composites using shear thickening fluid and natural rubber–A review of current status10.1016/j.compstruct.2021.114092 ↗
21. Effect of particle size of fumed silica on the puncture resistance of fabrics impregnated with shear thickening fluid
22. High Frictional Coated Multi-Layer Ballistic Fabrics for High Velocity and Hypervelocity Impact Protection10.1016/j.ijimpeng.2023.104652 ↗
23. Design of the ballistic performance of shear thickening fluid (STF) impregnated Kevlar fabric via numerical simulation10.1016/j.matdes.2023.111599 ↗
24. Energy analysis of fabric impregnated by shear thickening fluid in yarn pullout test
25. Impact Resistant Flax Fiber Fabrics Using Shear Thickening Fluid
26. Rheometry of novel shear thickening fluid and its application for improving the impact energy absorption of p-aramid fabric10.1016/j.tws.2020.106954 ↗
27. Dynamic compressive response of 3D GFRP composites with shear thickening fluid (STF) matrix as cushioning materials10.1177/0021998320984247 ↗
28. High-impact resistant hybrid sandwich panel filled with shear thickening fluid10.1016/j.compstruct.2022.115208 ↗
29. Rheological response and quasi-static stab resistance of STF/MWCNTs-impregnated aramid fabrics with different textures10.1177/1528083719830144 ↗
30. Mapping the recent advancements in bast fiber reinforced biocomposites: A review on fiber modifications, mechanical properties, and their applications10.1016/j.rinma.2023.100448 ↗
31. Yu W hao, Li W ping, Shangguan Y fan, Ji X yang, Ma T, Wu G qing. Relationships between distribution characteristics of ceramic fragments and anti-penetration performance of ceramic composite bulletproof insert plates. Defence Technology 2023;19:103–10.10.1016/j.dt.2021.10.003 ↗
32. Preparation and properties of shear thickening fluid (STF) capsule filled graded buffer composites10.1016/j.jmrt.2020.07.106 ↗
33. Numerical modeling of fabrics treated with multi-phase shear thickening fluids under high velocity impacts10.1016/j.tws.2019.106573 ↗
34. Influences of clamping methods and weaving architectures on the ballistic performance of 3D orthogonal woven fabrics10.1016/j.compstruct.2023.117088 ↗
35. Effects of ZnO nanowire and silica coatings on the inter-yarn friction and ballistic properties of Kevlar fabrics10.1016/j.ijimpeng.2023.104637 ↗
36. Zhou Y, Li H, Zhang Z, Li G, Xiong Z, Wang M. Ballistic response of stitched woven fabrics with superior energy absorption capacity: Experimental and numerical investigation. Compos Struct 2021;261.10.1016/j.compstruct.2020.113328 ↗
37. Effect of dispersing media and temperature on inter-yarn frictional properties of Kevlar fabrics impregnated with shear thickening fluid10.1016/j.compstruct.2020.112557 ↗
38. Study the effects of PEG modification methods on the resistance of 3D E-glass woven-STF composites at quasi-static and low-velocity impact loads10.1016/j.molliq.2022.119781 ↗
39. An exposition of shear thickening fluid treated double and 3D woven fabrics with a new integrity factor for enhanced impact resistance10.1016/j.compstruct.2021.114086 ↗
40. Enhancement of the ballistic performance of aramid fabric with polyurethane and shear thickening fluid10.1016/j.matdes.2020.109015 ↗
41. Conductive shear thickening gel/Kevlar wearable fabrics: A flexible body armor with mechano-electric coupling ballistic performance
42. Parametric optimisation of shear thickening fluid treatment for ultra-high molecular weight polyethylene woven fabric10.1177/15280837221126740 ↗
43. High strain-rate characterization of shear thickening fluid reinforced with MWCNT nanoparticles using SHPB10.1016/j.matlet.2022.133426 ↗