journal article·2019-03Open access

Towards behavior by design: A case study on corrugated architectures

E. Plancher, L. Héraud, P. Lhuissier, R. Dendievel, D. Fabrègue, J.-J. Blandin, G. Martin

Materials & Design· Volume 166

Abstract

A design strategy, referred to as behavior by design, was introduced to develop novel architectured materials starting from their expected stress-strain response. Target behaviors in this strategy have unusual shapes that provide new functions to the material. Here, a numerical toolbox was employed to predict the geometry of metal tensile samples with a corrugated gauge section, given the expected characteristics of their stress-strain response. A multiscale approach, based on a finite element model, was used to construct characteristic points and indices on the macroscopic stress-strain curves to select the relevant input geometrical parameters. Additive manufacturing (electron beam melting) was employed to build several predicted geometries in Ti-6Al-4V titanium alloy. Mechanical testing revealed a good agreement between the experimental and predicted behaviors with limited difference in strain (0.8%) and stress (50 MPa). Shape variations such as local thickness fluctuations were identified using X-ray tomography as a source of mismatch between simulations and experiments. The ability to control the whole shape of unusual stress-strain curves is expected to bring new exciting functionalities to architectured materials.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Architectured materials: expanding materials space10.1016/j.scriptamat.2012.07.038 ↗
2. Smaller is less stable: size effects on twinning vs. transformation of reverted austenite in TRIP-maraging steels10.1016/j.actamat.2014.07.020 ↗
3. Quenching and partitioning steel heat treatment10.1007/s13632-013-0082-8 ↗
4. Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects10.1016/j.actamat.2013.07.019 ↗
5. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
6. Designing architectured materials10.1016/j.scriptamat.2012.04.033 ↗
7. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
8. Mechanical metamaterials associated with stiffness, rigidity and compressibility: a brief review10.1016/j.pmatsci.2017.12.003 ↗
9. Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loading10.1016/j.actamat.2016.05.054 ↗
10. Geometrically induced strain hardening10.1016/j.scriptamat.2012.08.008 ↗
11. Analytical model of the unbending behavior of corrugated reinforcements10.1002/adem.201300525 ↗
12. Fraser · 2017
13. Anisotropic Ti-6Al-4V gyroid scaffolds manufactured by electron beam melting (EBM) for bone implant applications10.1016/j.matdes.2017.10.040 ↗
14. The effect of defects on the mechanical response of Ti-6Al-4V cubic lattice structures fabricated by electron beam melting10.1016/j.actamat.2016.02.029 ↗
15. Properties of Ti-6Al-4V non-stochastic lattice structures fabricated via electron beam melting10.1016/j.msea.2008.04.002 ↗
16. Characterization of Ti-6Al-4V open cellular foams fabricated by additive manufacturing using electron beam melting10.1016/j.msea.2009.11.015 ↗
17. Direct metal fabrication of titanium implants with tailored materials and mechanical properties using electron beam melting technology10.1016/j.msec.2007.04.022 ↗
18. Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti-6Al-4V) fabricated using electron beam melting (EBM), part 2: energy input, orientation, and location10.1016/j.msea.2013.02.065 ↗
19. Electron beam melted Ti-6Al-4V: microstructure, texture and mechanical behavior of the as-built and heat-treated material10.1016/j.msea.2015.11.052 ↗
20. Comparison of the microstructures and mechanical properties of Ti-6Al-4V fabricated by selective laser melting and electron beam melting10.1016/j.matdes.2015.12.135 ↗
21. Effect of build orientation on the fatigue properties of as-built electron beam melted Ti-6Al-4V alloy10.1016/j.ijfatigue.2018.08.006 ↗
22. The effectiveness of hot isostatic pressing for closing porosity in titanium parts manufactured by selective electron beam melting10.1007/s11661-016-3429-3 ↗
23. Porosity regrowth during heat treatment of hot isostatically pressed additively manufactured titanium components10.1016/j.scriptamat.2016.05.002 ↗
24. Mechanical equivalent diameter of single struts for the stiffness prediction of lattice structures produced by electron beam melting
25. Geometrical control of lattice structures produced by EBM through chemical etching: investigations at the scale of individual struts10.1016/j.matdes.2016.08.029 ↗
26. Improving the mechanical efficiency of electron beam melted titanium lattice structures by chemical etching
27. Enhancing the tensile properties of EBM as-built thin parts: effect of HIP and chemical etching