Thio-olivine Mn2SiS4 thin films by reactive magnetron sputtering: Structural and optical properties with insights from first principles calculations
Source abstract
Abstract
Abstract Thio-olivines such as (Fe,Mn)2(Si,Ge)S4 have been proposed as candidate earth-abundant materials for single and multi-junction solar cells. In this work we present the first investigation of Mn2SiS4thin films prepared by reactive magnetron sputtering deposition, using a composition grading approach. Precursor instability in ambient conditions is observed, revealing the oxidation/hydrolysis of Si S bonds from the as-deposited film as a blocking mechanism for the ternary compound formation. Structural, morphological and optical properties of the annealed Mn2SiS4 films are reported for the first time. Resulting Mn2SiS4 films have orthorhombic Pnma structure and are polycrystalline. Raman active modes at 325 nm excitation are observed at 262, 320, 400 and 464 cm−1. From room temperature photoluminescence at 532 nm excitation the band gap is estimated to be about 1.9 eV, but a high optical absorption coefficient of >104 cm−1 was only obtained at E > 2.8 eV. First principles calculations are used for better understanding of opto-electronic properties. From the calculations, Mn2SiS4 is suggested to have a band gap of about 1.73–1.86 eV depending on the magnetic configuration of Mn and slight indirect nature. The slow absorption onset is interpreted by strong anisotropy due to one of the components of the dielectric function.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. A review of thin film solar cell technologies and challenges10.1016/j.rser.2016.12.028 ↗
2. Optimum band gap combinations to make best use of new photovoltaic materials10.1016/j.solener.2016.06.042 ↗
3. High-efficiency crystalline silicon solar cells: status and perspectives10.1039/C5EE03380B ↗
4. High efficiency silicon solar cells10.1016/j.egypro.2013.05.033 ↗
5. Review of progress toward 20% efficiency flexible CIGS solar cells and manufacturing issues of solar modules10.1109/JPHOTOV.2012.2226869 ↗
6. Progress in thin film CIGS photovoltaics – research and development, manufacturing, and applications10.1002/pip.2811 ↗
7. Thin film solar cells: research in an industrial perspective10.1007/s13280-012-0265-6 ↗
8. Thin film CdTe solar cells-a review
9. CdTe thin film solar cells: device and technology issues10.1016/j.solener.2004.05.023 ↗
10. Past, present and future of the thin film CdTe/CdS solar cells10.1016/j.solener.2018.01.018 ↗
11. Iron chalcogenide photovoltaic absorbers10.1002/aenm.201100351 ↗
12. Polyhedral deformations in olivine-type compounds and the crystal structure of Fe2SiS4 and Fe2GeS410.1107/S056774087600633X ↗
13. Neutron powder diffraction study of the crystal and magnetic structures of Fe2SiS410.1016/S0304-8853(98)01152-4 ↗
14. Solution synthesis and reactivity of colloidal Fe2GeS4: a potential candidate for earth abundant, nanostructured photovoltaics10.1021/ja408333y ↗
15. Highly crystalline Fe2GeS4 nanocrystals: green synthesis and their structural and optical characterization10.1039/C4TA05850J ↗
16. Specific-heat, magnetic-properties and critical-behavior of Mn2sis4 and Fe2ges410.1016/0304-8853(94)01665-8 ↗
17. Spin-flop multicritical phenomena in Mn2AS4(A = Si and Ge)10.1016/j.jmmm.2006.10.443 ↗
18. Magnetic phase diagrams of the multicritical olivine Mn2SiS4 and Mn2GeS410.1016/j.jmmm.2009.11.013 ↗
19. Church · 1994
20. Structure of Mn2SiS410.1107/S0108270189007390 ↗
21. Extraction of extinction coefficient of weak absorbing thin films from special absorption10.1088/0022-3727/22/9/024 ↗
22. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
23. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
24. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
25. Restoring the density-gradient expansion for exchange in solids and surfaces10.1103/PhysRevLett.100.136406 ↗
26. Band theory and Mott insulators: Hubbard U instead of stoner I10.1103/PhysRevB.44.943 ↗
27. Resistive switching in iron-oxide-filled carbon nanotubes
28. Electronic and optical properties of Cu2XSnS4 (X = Be, Mg, Ca, Mn, Fe, and Ni) and the impact of native defect pairs10.1063/1.4984115 ↗
29. High-throughput combinatorial database of electronic band structures for inorganic scintillator materials10.1021/co200012w ↗
30. In situ identification of kinetic factors that expedite inorganic crystal formation and discovery10.1039/C6TC04931A ↗
31. Theoretical study of silicon–oxygen–sulfur oligomers (SiOS)n (n = 1 − 6)10.1016/j.cplett.2005.01.082 ↗
32. Enthalpies of formation of solid silicon dichalcogenides10.1063/1.555960 ↗
33. Interference effects in photoluminescence spectra of Cu2ZnSnS4 and Cu(In,Ga)Se2 thin films10.1063/1.4926857 ↗
34. Tuning the morphology of metastable MnS films by simple chemical bath deposition technique10.1016/j.apsusc.2015.06.154 ↗
35. Preparation and characterization of polycrystalline MnS thin films by the RF-sputtering technique above room temperature10.1016/S0022-0248(03)01315-0 ↗
36. Predicted thermoelectric properties of olivine-type Fe 2 GeCh 4 (Ch=S, Se and Te)
37. High absorption coefficients of the CuSb(Se,Te)2 and CuBi(S,Se)2 alloys enable high-efficient 100 nm thin-film photovoltaics10.1051/epjpv/2017005 ↗
38. Dielectric function and double absorption onset of monoclinic Cu2SnS3: origin of experimental features explained by first-principles calculations10.1016/j.solmat.2016.04.028 ↗
39. Thermodynamic aspects of the synthesis of thin-film materials for solar cells10.1002/cphc.201200067 ↗
40. Platt · 2010
41. Solution synthesis of single-crystalline Fe2GeS4 nanosheets10.1016/j.matlet.2016.07.072 ↗