Preparation and characterization of PAN/TiO2 composite membranes for grey water treatment using Rotary jet spinning
Source abstract
Abstract
• Rotary jet spinning enabled fast nanofiber production membranes. • Titanium dioxide addition greatly enhanced membrane surface wettability. • Reduced fiber size boosted porosity and enhanced greywater purification. • Optimized membranes achieved over 62% chemical oxygen demand removal. With industrial expansion and increasing water demand, pollution caused by untreated wastewater has become a major environmental concern. This work focused on creating a membrane made from polyacrylonitrile and titanium dioxide (PAN/TiO 2 ) through the spinning jet method. The characterization of the composited membrane was carried out by using XRD, FTIR, SEM, and FESEM techniques. The effectiveness of the fabricated composite membrane in treating grey water and its performance were experimented with on a laboratory scale. The Taguchi method was employed to design the performance experiments and optimize the effective parameters. The results indicated that decreasing PAN concentration and increasing rotation speed resulted in smaller nanofiber diameters, while adding TiO 2 enhanced membrane hydrophilicity. The smallest achieved nanofiber diameter was 439 nm. The tests showed a maximum porosity of 71% and a minimum pore size of 0.511 µm. The laboratory results were analyzed using Minitab Software, which identified that the optimal conditions for the process were 13 wt% PAN concentration, 5500 rpm rotation speed, 5 wt% TiO 2 concentration, and 2 bar pressure. In this case, the membrane efficiency in greywater treatment was 62.3%, based on COD rejection. PAN/TiO 2 membranes show promise for grey water treatment.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Membrane Separation Technologies · Membrane-based Ion Separation Techniques · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Copper supported Dowex50WX8 resin utilized for the elimination of ammonia and its sustainable application for the degradation of dyes in wastewater10.1038/s41598-024-69839-w ↗
2. Optimizing heavy metal remediation of synthetic wastewater using Chlorella vulgaris and Sargassum angustifolium: a comparative analysis of biosorption and bioaccumulation techniques10.1016/j.scitotenv.2025.179938 ↗
3. Agricultural water demand is taxing regional water supplies10.1038/s44221-024-00215-8 ↗
4. Removal of heavy metal ions from wastewaters: a review10.1016/j.jenvman.2010.11.011 ↗
5. Low-cost photocatalytic membrane modified with green heterojunction TiO2/ZnO nanoparticles prepared from waste10.1038/s41598-023-49516-0 ↗
6. Research progress on metal ion recovery based on membrane technology and adsorption synergy10.3390/ma17143562 ↗
7. Fouling behavior of BTEX in petrochemical wastewater treated by nanofiltration (NF)10.1016/j.jhazmat.2024.135185 ↗
8. Electrospun polystyrene nanofiber membrane with superhydrophobicity and superoleophilicity for selective separation of water and low viscous oil10.1021/am404156k ↗
9. Fabrication of multifunctional wool textile using the synthesis of silver-modified N-doped ZnO/TiO2 photocatalysts10.1016/j.heliyon.2024.e36522 ↗
10. Grafe, T. H., and K. M. Graham. “Nanofiber Webs from Electrospinning in Nonwovens in Filtration—Fifth International Conference.”Stuttgart, Germany, March(2003)..
11. Fabrication and modification of nanofiltration membranes by solution electrospinning technique: a review of influential factors and applications in water treatment10.1016/j.desal.2023.116638 ↗
12. Recent advances in nanofibrous membranes: production and applications in water treatment and desalination10.1016/j.desal.2019.114178 ↗
13. H. Jiang Centrifugally-Spun Nanofibers and Their Energy Storage Applications 2014.
14. Parameter study and characterization for polyacrylonitrile nanofibers fabricated via centrifugal spinning process10.1016/j.eurpolymj.2013.09.017 ↗
15. Rotary jet spinning (RJS): a key process to produce biopolymeric wound dressings10.3390/pharmaceutics14112500 ↗
16. Electrospun PAN nanofibers membrane: functionalization and environmental applications
17. Preparation of amidoxime polyacrylonitrile chelating nanofibers and their application for adsorption of metal ions10.3390/ma6030969 ↗
18. Electrospun carbon nanofibers/TiO2-PAN hybrid membranes for effective removal of metal ions and cationic dye
19. Enhancement of heavy metal ion adsorption using electrospun polyacrylonitrile nanofibers loaded with ZnO nanoparticles10.1002/app.47209 ↗
20. Novel electrospun ZIF/PcH nanofibrous membranes for enhanced performance of membrane distillation for salty and dyeing wastewater treatment10.1016/j.desal.2022.115563 ↗
21. Fabrication of novel hydrophobic electrospun nanofiber membrane using polybenzoxazine for membrane distillation application10.1016/j.desal.2022.116203 ↗
22. Polyamidoxime nanoparticles/polyvinyl alcohol composite chelating nanofibers prepared by centrifugal spinning for uranium extraction10.1016/j.reactfunctpolym.2021.104812 ↗
23. SiO2/polyacrylonitrile membranes via centrifugal spinning as a separator for Li-ion batteries10.1016/j.jpowsour.2014.10.015 ↗
24. Centrifugally-spun tin-containing carbon nanofibers as anode material for lithium-ion batteries10.1007/s10853-014-8666-5 ↗
25. Forcespinning: a new method for the mass production of Sn/C composite nanofiber anodes for lithium ion batteries10.1016/j.ssi.2015.12.020 ↗
26. Alcoutlabi, Mataz, et al. “SnO2/NiO/Carbon Composite Nanofibers Produced By Forcespinning of Poly Acrylonitrile/SnO2 Precursor As Anodes for Lithium Ion Batteries.”Electrochemical Society Meeting Abstracts 229. No. 1. The Electrochemical Society, Inc., 2016..10.1149/MA2016-01/1/47 ↗
27. Durable photocatalytic membrane of PAN/TiO2/CNT for methylene blue removal through a cross-flow membrane reactor10.1080/01496395.2022.2145221 ↗
28. Photocatalytic membrane of TiO2/CNT decorated PAN nanofibers with enhanced performance under LED visible-light irradiation10.1177/0958305X221108494 ↗
29. Titania and zirconia ceramic nanofiltration membrane fabrication by coating method on mullite and mullite-alumina microfiltration supports for industrial wastewater treatment10.1016/j.arabjc.2024.105973 ↗
30. Tavakolmoghadam, Maryam, et al. “Poly (vinylidene fluride) membrane preparation and characterization: Effects of mixed solvents and PEG molecular weight.” (2016): 11-21..
31. Application of Taguchi techniques to study dry sliding wear behaviour of metal matrix composites10.1016/j.matdes.2006.01.006 ↗
32. Optimization of process parameters for machining of AISI-1045 steel using Taguchi design and ANOVA10.1016/j.simpat.2015.08.004 ↗
33. Removal of pigment from textile wastewater by electrospun nanofibre membrane
34. Empowering TiO2–coated PVDF membranes stability with polyaniline and polydopamine for synergistic separation and photocatalytic enhancement in dye wastewater purification10.1038/s41598-024-66996-w ↗
35. Self-standing CdS/TiO2 Janus nanofiberous membrane: COD removal, antibacterial activity and photocatalytic degradation of organic pollutants10.1016/j.jece.2024.112521 ↗
36. “Electrospun keratin-polysulfone blend membranes for treatment of tannery effluents”10.1007/s11270-020-04682-z ↗