journal article·2026-04Open access

The effects of recrystallisation on the fatigue and corrosion properties of LB-PBF stainless steel 316L

Charlie Bevan, Thomas Jones, Amar Malla, James Sullivan, David Penney, Robert Lancaster

Materials & Design· Volume 264

Abstract

• In LB-PBF SS316L, recrystallisation begins at ≥ 1150 °C, fully achieved at 1200 °C. • High temperature treatments reduce but do not remove mechanical anisotropy. • Full recrystallisation improves pitting resistance in 3.5 % NaCl. • Heat treatment balances strength, ductility, fatigue and corrosion properties. This study investigates the influence of post-build heat treatments (HTs) on the microstructural evolution, mechanical performance, and corrosion resistance of laser beam powder bed fusion (LB-PBF) stainless steel 316 L. Samples built in vertical and horizontal orientations were subjected to three HT conditions (1050, 1150, and 1200 °C), enabling analysis of recrystallisation behaviour, grain morphology, and the mitigation of anisotropy. Tensile, low-cycle fatigue (LCF), and fatigue crack growth (FCG) testing revealed that full recrystallisation occurred at ≥ 1150 °C, reducing orientation-dependent discrepancies in strength and ductility. Despite improved isotropy, LCF testing demonstrated residual anisotropy, with samples built in the vertical orientation consistently outperforming those built in the horizontal orientation. Samples heat treated at 1050 °C retained a fine, columnar grain structure, resulting in superior resistance to crack growth due to increased yield strength and grain boundary density. In contrast, samples heat treated at 1150 and 1200 °C exhibited coarser, equiaxed grains with diminished fatigue crack resistance. Cyclic polarisation testing showed recrystallisation at the higher temperatures induced positive changes in corrosion performance, substantially increasing pitting potential compared to un-recrystallised microstructures, as found at 1050 °C. The findings highlight the trade-offs between strength, ductility, and fatigue resistance as a function of microstructure, offering insight into optimising HT protocols for LB-PBF SS316L components in fatigue-critical applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Mechanical Failure Analysis and Simulation · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. On the current research progress of metallic materials fabricated by laser powder bed fusion process: a review10.1016/j.jmrt.2022.07.085 ↗
2. Melt pool temperature and cooling rates in laser powder bed fusion
3. A.J. Godfrey; Simpson, J.; Leonard, D.; Sisco, K.; Dehoff, R.R.; and Babu, S.S.; , ‘Heterogeneity and Solidification Pathways in Additively Manufactured 316L Stainless Steels’, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., vol. 53, no. 9, pp. 3321–3340, Sep. 2022, doi: 10.1007/s11661-022-06747-6.10.1007/s11661-022-06747-6 ↗
4. Anisotropy of mechanical properties and residual stress in additively manufactured 316l specimens10.3390/ma14237176 ↗
5. Additive manufacturing of heat exchangers in aerospace applications: a review10.1016/j.applthermaleng.2023.121387 ↗
6. Microstructure, strain-rate sensitivity, work hardening, and fracture behavior of laser additive manufactured austenitic and martensitic stainless steel structures10.1016/j.msea.2019.04.065 ↗
7. Revilla · Corros. Sci. · 2024 · 22810.1016/j.corsci.2023.111814 ↗
8. Evolution of 316L stainless steel feedstock due to laser powder bed fusion process
9. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
10. R.F. Davis, ‘Hot Isostatic Pressing’, Concise Encyclopedia of Advanced Ceramic Materials, pp. 210–215, Jan. 1991, doi: 10.1016/B978-0-08-034720-2.50061-7.10.1016/B978-0-08-034720-2.50061-7 ↗
11. Investigation of porosity changes in cast ti6al4v rods after hot isostatic pressing10.1007/s11665-015-1580-4 ↗
12. The optimisation of hot isostatic pressing treatments for enhanced mechanical and corrosion performance of stainless steel 316L produced by laser powder bed fusion
13. 1994
14. A.J. Sedriks, Corrosion of Stainless Steels, 2nd ed. New York, USA, 1996.
15. Effect of heat treatment on the recrystallisation of thin-walled stainless steel 316L fabricated by laser beam powder bed fusion10.1016/j.matdes.2025.114592 ↗
16. Effect of heat treatment on microstructural evolution in additively manufactured 316L stainless steel10.3390/met13061062 ↗
17. Microstructure, porosity, and bending fatigue behaviour of PBF-LB/M SS316L for Biomedical applications10.3390/met15060650 ↗
18. Microstructure, mechanical properties, and deformation behaviour of LPBF 316L via post-heat treatment10.1080/17452759.2024.2405623 ↗
19. Revealing relationships between microstructure and hardening nature of additively manufactured 316L stainless steel10.1016/j.matdes.2020.109385 ↗
20. A. Ayad, N. Allain-Bonasso, N. Rouag, F. Wagner, Grain orientation spread values in if steels after plastic deformation and recrystallization’, in Materials Science Forum, Trans Tech Publications Ltd, 2012, pp. 269–272. doi: 10.4028/www.scientific.net/MSF.702-703.269.10.4028/www.scientific.net/MSF.702-703.269 ↗
21. BS EN ISO 6892-1:2019: Metallic materials. Tensile testing - Method of test at room temperature’. British Standards Institution, London, 2020.
22. ISE/101/6. BS 7270:2006 Metallic materials. Constant amplitude strain controlled axial fatigue. Method of test. BSI, 2006.
23. Crack propagation mechanisms for creep fatigue: a consolidated explanation of fundamental behaviours from initiation to failure10.3390/met8080623 ↗
24. Microstructures and mechanical properties of crack-free 316L stainless steel and Inconel 625 joint by using Laser Engineered Net Shaping10.1016/j.optlastec.2022.108357 ↗
25. S. Ren-ho, X. Jian-ying, H. Dong-po, Characteristics of Mechanical Properties and Microstructure for 316L Austenitic Stainless Steel’, 2011. [Online]. Available: www.sciencedirect.com.
26. Investigation of the strengthening mechanism in 316L stainless steel produced with laser powder bed fusion10.1016/j.msea.2021.141699 ↗
27. W. Li; Meng, L.; Niu, X.; and Zhou, W.; , ‘Microstructure, mechanical properties, and deformation behaviour of LPBF 316L via post-heat treatment’, Virtual Phys. Prototyp., vol. 19, no. 1, 2024, doi: 10.1080/17452759.2024.2405623.10.1080/17452759.2024.2405623 ↗
28. P. Krakhmalev; Fredriksson, G.; Svensson, K.; Yadroitsev, I.; Yadroitsava, I.; Thuvander, M.; and Peng, R.; , ‘Microstructure, solidification texture, and thermal stability of 316 L stainless steel manufactured by laser powder bed fusion’, Metals, vol. 8, no. 8. MDPI AG, Aug. 15, 2018. doi: 10.3390/met8080643.10.3390/met8080643 ↗
29. Strain rate-dependent tensile response and deformation mechanism of laser powder bed fusion 316L stainless steel10.1016/j.msea.2024.146124 ↗
30. Simultaneously improved strength and ductility yet strain-hardenable 316L stainless steel by sigma phase and hetero-structuring10.1016/j.matdes.2024.113058 ↗
31. Pitting corrosion of metals: a review of the critical factors10.1149/1.1838615 ↗
32. F.C. Pinto; Aota, L.S.; Souza Filho, I.R.; Raabe, D.; and Sandim, H.R.Z.; , ‘Recrystallization in non-conventional microstructures of 316L stainless steel produced via laser powder-bed fusion: effect of particle coarsening kinetics’, J. Mater. Sci., vol. 57, no. 21, pp. 9576–9598, Jun. 2022, doi: 10.1007/s10853-021-06859-1.10.1007/s10853-021-06859-1 ↗
33. New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion10.1016/j.actamat.2020.11.018 ↗
34. Dependency of recrystallization kinetics on the solidification microstructure of 316L stainless steel processed by laser powder bed fusion (LPBF)10.1016/j.matchar.2022.112370 ↗
35. Strain induced grain growth behavior in laser powder bed fusion fabricated austenitic stainless steel 316L investigated by quasi–in–situ EBSD10.1016/j.matlet.2024.137327 ↗
36. C. Zhang; Ahmed, S.; Nadimpalli, V.K.; Yu, T.; and Juul Jensen, D.; , ‘Recrystallization kinetics in 3D printed 316L stainless steel’, IOP Conf. Ser. Mater. Sci. Eng., vol. 1310, no. 1, p. 012042, Aug. 2024, doi: 10.1088/1757-899X/1310/1/012042.10.1088/1757-899X/1310/1/012042 ↗
37. Dynamic recrystallization behavior of selective laser melted 316L stainless steel10.1016/j.jmrt.2023.11.120 ↗
38. Ostwald ripening in multicomponent alloys10.1016/j.actamat.2013.03.049 ↗
39. Strengthening mechanisms in selective laser melted 316L stainless steel10.1016/j.msea.2021.142434 ↗
40. On the thermal coarsening and transformation of nanoscale oxide inclusions in 316L stainless steel manufactured by laser powder bed fusion and its influence on impact toughness10.1016/j.msea.2022.142690 ↗
41. L.S. Aota; Bajaj, P.; Zilnyk, K.D.; Ponge, D.; and Sandim, H.R.Z.; , ‘The origin of abnormal grain growth upon thermomechanical processing of laser powder-bed fusion alloys’, Materialia (Oxf)., vol. 20, p. 101243, Dec. 2021, doi: 10.1016/J.MTLA.2021.101243.10.1016/j.mtla.2021.101243 ↗
42. E. Nieto-Valeiras; Haouala, S.; and LLorca, J.; , ‘On the effect of slip transfer at grain boundaries on the strength of FCC polycrystals’, European Journal of Mechanics - A/Solids, vol. 91, p. 104427, Jan. 2022, doi: 10.1016/J.EUROMECHSOL.2021.104427.10.1016/j.euromechsol.2021.104427 ↗
43. On grain boundary engineering for a 316L austenitic stainless steel10.3390/met12122185 ↗
44. M. Shamsujjoha; Agnew, S.R.; Fitz-Gerald, J.M.; Moore, W.R.; and Newman, T.A.; , ‘High Strength and Ductility of Additively Manufactured 316L Stainless Steel Explained’, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., vol. 49, no. 7, pp. 3011–3027, Jul. 2018, doi: 10.1007/s11661-018-4607-2.10.1007/s11661-018-4607-2 ↗
45. The influence of energy density on the low cycle fatigue behaviour of laser powder bed fused stainless steel 316L10.1016/j.ijfatigue.2023.108123 ↗
46. Pitting corrosion of austenitic and duplex stainless steels in dilute acids at elevated temperature: effect of electrolyte chemistry and material microstructure10.1016/j.corsci.2025.112769 ↗
47. Effect of grain ultra-refinement on corrosion behavior of ultra-high strength high nitrogen stainless steel10.1016/j.corsci.2020.108847 ↗
48. Process-microstructure-corrosion of additively manufactured steels: a review10.1080/10408436.2023.2255616 ↗
49. Mechanisms of inclusion-induced pitting of stainless steels: a review10.1016/j.jmst.2023.06.008 ↗