Pore-microstructure evolution and quantification of strengthening mechanisms contribution in laser powder bed fusion of AlMgScZr alloy
Source abstract
Abstract
The intrinsic mechanisms linking process parameters, microstructure, and performance for laser powder bed melting (LPBF) formed AlMgScZr alloys remain to be elucidated. A multi-scale linkage framework is established, encompassing the full process chain from volume energy density (VED), to pore defect and microstructure regulation through heat flux parameters, and ultimately to macroscopic performance. The specific contributions of each strengthening mechanism are quantified, validating the effectiveness of the framework. The results show that within VED of 60–80 J/mm3, an optimal balance between pore nucleation, growth, and degassing achieves a relative density of 99%. The nucleation of spherical pore remains unavoidable, affected by heterogeneous catalysis of Al3(Sc,Zr). Grains evolution is synergistically regulated by thermodynamic parameters of solidification, catalytic nucleation of nanoparticles and intense shear stress. Coarse grains refine to 2.10 µm at VED of 97.2 J/mm3, due to fluid-induced strong shear stress and shifting solidification mode toward fine grains. Refinement promotes dislocation recovery, weakening texture intensity. Microhardness peaks within VED of 60–80 J/mm3, owing to the defect suppression, grain regulation, and Al3(Sc,Zr) formation. The theoretically calculated strength agrees well with experiment (501 MPa), with a 3.3% error. These results provide theoretical guidance for high-quality LPBF fabrication of AlMgScZr alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Cellular and Composite Structures · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Evolution of texture and residual stresses in 2205 duplex stainless steel during laser powder bed fusion10.1016/j.matdes.2025.113658 ↗
2. Metallurgy, mechanistic models and machine learning in metal printing10.1038/s41578-020-00236-1 ↗
3. Additive manufacturing of a high strength Al-5Mg2Si-2Mg alloy: microstructure and mechanical properties10.1016/j.jmst.2021.02.048 ↗
4. Review on the correlation between microstructure and mechanical performance for laser powder bed fusion AlSi10Mg
5. Facile and cost-effective approach to additively manufacture crack-free 7075 aluminum alloy by laser powder bed fusion10.1016/j.jallcom.2022.167097 ↗
6. Manipulating the microstructure and tensile properties of selective laser melted Al-Mg-Sc-Zr alloy through heat treatment10.1016/j.jallcom.2020.154773 ↗
7. Effect of laser process parameters on thermal behavior and residual stress of high-strength aluminum alloy processed by laser powder bed fusion10.1016/j.jmrt.2024.10.074 ↗
8. Achieving high strength-ductility combination of Al–Mn–Mg-Sc-Zr alloy subjected by laser powder bed fusion and suitable post heat treatment10.1016/j.msea.2024.146536 ↗
9. Effect of aging treatment on the microstructure and mechanical properties of Al-3.02Mg-0.2Sc-0.1Zr alloy printed by selective laser melting10.1016/j.matdes.2019.107668 ↗
10. Selective laser melting of rare earth element Sc modified aluminum alloy: thermodynamics of precipitation behavior and its influence on mechanical properties
11. Selective laser melting of a novel Sc and Zr modified Al-6.2 Mg alloy: Processing, microstructure, and properties10.1016/j.powtec.2017.06.050 ↗
12. Tang H, Geng Y, Bian S, Xu JH, Zhang ZJ. An ultra-high strength over 700MPa in Al-Mn-Mg-Sc-Zr alloy fabricated by selective laser melting. Acta Metall. Sin. (Engl. Lett.) 2022, 35:46674. https://doi: 10.1007/s40195-021-01286-2.10.1007/s40195-021-01286-2 ↗
13. Influence mechanism of process parameters on relative density, microstructure, and mechanical properties of low Sc-content Al-Mg-Sc-Zr alloy fabricated by selective laser melting
14. Effect of heat treatment on microstructure and mechanical anisotropy of selective laser melted Al-Mn-Sc alloy10.1016/j.msea.2023.145743 ↗
15. A new AlSi7Mg-xSc alloy with high strength and high strain Manufactured by Selective Laser Melting10.1016/j.jmrt.2024.04.123 ↗
16. The effect of cooling rate on the morphology of primary Al3Sc intermetallic particles in Al-Sc alloys10.1016/S1359-6454(01)00050-7 ↗
17. Effects of solute atoms re-dissolution on precipitation behavior and mechanical properties of selective laser melted Al-Mg-Sc-Zr alloys10.1016/j.msea.2022.143870 ↗
18. A study on Sc-and Zr-modified Al-Mg alloys processed by selective laser melting10.1016/j.msea.2021.142516 ↗
19. Laser printing path and its influence on molten pool configuration, microstructure and mechanical properties of laser powder bed fusion processed rare earth element modified Al-Mg alloy10.1080/17452759.2022.2036530 ↗
20. Influence of hatch distance on processing, microstructure and mechanical properties of AlMgScZr alloy fabricated by laser powder bed fusion10.1016/j.jmapro.2022.06.036 ↗
21. Porosity formation mechanisms, microstructure evolution and mechanical performance of AlMgScZr alloy fabricated by laser powder bed fusion: effect of hatch distance10.1016/j.jmapro.2023.03.047 ↗
22. Influence of SLM scan-speed on microstructure, precipitation of Al3Sc particles and mechanical properties in Sc- and Zr-modified Al-mg alloys10.1016/j.matdes.2017.11.053 ↗
23. Heat transfer and melt flow of keyhole, transition and conduction modes in laser beam oscillating welding10.1016/j.ijheatmasstransfer.2022.123821 ↗
24. Numerical simulation and experimental investigation of the molten pool evolution and defects formation mechanism of Selective laser melted CuSn20/Diamond composites10.1016/j.matdes.2024.113082 ↗
25. Numerical investigation of balling defects in laser-based powder bed fusion of metals with Inconel 718
26. Thermo-mechanical approach to study the residual stress evolution in part-scale component during laser additive manufacturing of alloy 71810.1016/j.matdes.2022.111048 ↗
27. Finite element analysis of temperature and stress fields during selective laser melting process of Al-Mg-Sc-Zr Alloy10.1016/S1003-6326(21)65703-5 ↗
28. Simulation of temperature distribution in single metallic powder layer for laser micro-sintering10.1016/j.commatsci.2011.09.012 ↗
29. Selective laser sintering of an amorphous polymer—simulations and experiments10.1243/0954405991516822 ↗
30. An anisotropic enhanced thermal conductivity approach for modelling laser melt pools for Ni-base super alloys10.1016/j.apm.2012.03.028 ↗
31. finite element analysis of temperature and stress fields during the selective laser melting process of thermoelectric SnTe10.1016/j.jmatprotec.2018.06.001 ↗
32. Microstructure and wear behavior of insitu synthesized TiC-reinforced CoCrFeNi high entropy alloy prepared by laser cladding10.1016/j.apsusc.2024.160720 ↗
33. Microstructural features of Sc-and Zr-modified Al-Mg alloys processed by selective laser melting10.1016/j.matdes.2016.11.040 ↗
34. Superior strength of laser-arc hybrid additive manufactured Al-Zn-Mg-Cu alloy enabled by a tunable microstructure
35. Investigations of the processing-structure-performance relationships of an additively manufactured AlSi10Mg alloy via directed energy deposition10.1016/j.jallcom.2023.169050 ↗
36. Equiaxed grain formation by intrinsic heterogeneous nucleation via rapid heating and cooling in additive manufacturing of aluminum-silicon hypoeutectic alloy10.1016/j.jallcom.2022.165812 ↗
37. Solutes effect on grain structure and mechanical property evolution of Sc/Zr modified Al alloys fabricated by laser powder bed fusion10.1016/j.jallcom.2025.178444 ↗
38. Additive manufacturing of metals: microstructure evolution and multistage control10.1016/j.jmst.2021.06.011 ↗
39. Effects of shear flows on columnar dendritic microstructure during rapid solidification of IN718 alloy: a cellular automaton-lattice Boltzmann modeling study10.1016/j.jcrysgro.2022.126583 ↗
40. Material-structure-performance integrated laser-metal additive manufacturing10.1126/science.abg1487 ↗
41. Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: crack-inhibiting and multiple strengthening mechanisms10.1016/j.actamat.2020.03.060 ↗