Microstructure and compression behavior of powder-metallurgy processed fine-grained TWIP steel
Source abstract
Abstract
To enhance the strength of twinning-induced plasticity (TWIP) steels and promote their engineering application, powder metallurgy (PM) was employed in this study to directly produce fine-grained TWIP steels with average grain sizes of 2.93–11.93 μm, bypassing complex conventional processes involving induction melting, plastic deformation, and heat treatment. The quasi-static and dynamic compression properties of these samples exhibited a typical grain size dependence. Compared to the quasi-statically compressed samples, the dynamically compressed samples demonstrated enhanced work hardening, characterized by a higher flow stress and an increased work-hardening rate, along with a notable positive strain rate sensitivity. High-speed impact activated significant dislocation glide, leading to rapid dislocation multiplication, extensive twin nucleation, and particle deformation that generated high-energy distortion zones. This process also produced a high density of low-angle boundaries (LABs). Grain boundaries (GBs) and precipitation strengthening were the main drivers of work hardening. These mechanisms involved dislocation interactions with single Mn-rich particles, GB-associated particles, and those linked to twins. In contrast, twinning strengthening played a minor role due to the poor twin structure resulting from the suppressed twinning.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Influence of thermomechanical processing parameters on critical temperatures to develop an Advanced High-Strength Steel microstructure10.1007/s10853-021-06444-6 ↗
2. Twinning-induced plasticity (TWIP) steels10.1016/j.actamat.2017.06.046 ↗
3. Design considerations for hydrogen embrittlement resistance: the influence of dislocation density and substructures on hydrogen-assisted cracking in high-Mn TWIP steel10.1016/j.matdes.2025.114298 ↗
4. Effect of Cr content in temperature-dependent mechanicaproperties and strain hardening of a twinning-induced plasticity steel10.1016/j.msea.2023.145865 ↗
5. Microstructural and mechanical characterization of Ti-containing twinning-induced plasticity steel welded joint produced by gas tungsten arc welding process10.1002/srin.202000129 ↗
6. Aluminum coating of twinning-induced plasticity plates via plasma-enhanced magnetron sputtering as a potential industrial technique
7. The influence of dynamic deformation on the mechanisms in TWIP steel10.1016/j.matdes.2025.113943 ↗
8. Suppression and reactivation of transformation and twinning induced plasticity in laser powder bed fusion additively manufactured Ti-10V-2Fe-3Al
9. Compressive deformation-induced hierarchical microstructure in a TWIP β Ti-alloy10.1016/j.jmst.2021.09.048 ↗
10. Twinning-induced plasticity (TWIP) effect in multi-phase metastable beta Zr-Nb alloys10.1016/j.jmst.2022.07.062 ↗
11. TWIP-assisted Zr alloys for medical applications: design strategy, mechanical properties and first biocompatibility assessment10.1016/j.jmst.2023.09.051 ↗
12. Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate10.1016/j.actamat.2010.05.049 ↗
13. Microstructure and mechanical behavior of a novel Fe-Mn-C-Cr-Si high-manganese steel10.1007/s10853-023-08467-7 ↗
14. A novel ultrafine-grained Fe 22Mn 0.6C TWIP steel with superior strength and ductility10.1016/j.matchar.2016.12.026 ↗
15. Improved tensile properties of partially recrystallized submicron grained TWIP steel10.1016/j.matlet.2009.09.057 ↗
16. Effect of Cr content in temperature-dependent mechanical properties and strain hardening of a twinning-induced plasticity steel10.1016/j.msea.2023.145865 ↗
17. Deformation twinning in Nb-microalloyed Fe-Mn-C-Al twinning-induced plasticity steel10.1007/s11665-017-2898-x ↗
18. Influence of Nb as Microalloying element on the recovery and recrystallization of Fe-25Mn-12Cr-C-N twinning‐induced plasticity steels10.1002/srin.202000417 ↗
19. Hardening behaviour, mechanical properties and wear evaluation of TRIP/TWIP manganese steels: a comprehensive review10.1016/j.matpr.2023.04.012 ↗
20. Evading the strength-ductility trade-off dilemma in steel through gradient hierarchical nanotwins
21. Superior strength and multiple strengthening mechanisms in nanocrystalline TWIP steel10.1038/s41598-018-29632-y ↗
22. Strain-hardening resilience via the cooperation of geometrically necessary dislocations and deformation twins in a strong and ductile lightweight high-entropy steel10.1016/j.matdes.2024.113212 ↗
23. Tensile properties and twinning behavior of high manganese austenitic steel with finegrained structure10.1016/j.scriptamat.2008.06.050 ↗
24. Tensile deformation behavior of high manganese austenitic steel: the role of grain size10.1016/j.matdes.2010.01.049 ↗
25. Modeling plastic deformation of TWIP steel using cohesive zone and crystal plasticity finite element10.1016/j.matdes.2025.113785 ↗
26. A new approach to sintering and boriding of steels “Boro-sintering”: formation, microstructure and wear behaviors10.1016/j.surfcoat.2020.125482 ↗
27. Characterization of a 2205 duplex steel modified with boron obtained via powder metallurgy10.1002/srin.202300229 ↗
28. Effect of Cr addition on properties and tribological behavior at elevated temperature of boride layers grown on borosintered powder metallurgy alloys10.1007/s12540-022-01251-3 ↗
29. Role of molybdenum in ferrous powder metallurgy alloys: a systematic review
30. Mechanical behavior of ultrafine-grained high-Mn steels containing nanoscale oxides produced by powder technology10.1016/j.matdes.2015.12.028 ↗
31. Effect of relative density on microstructure and mechanical properties of Fe-12Mn-0.2C alloy fabricated by powder metallurgy10.1016/j.powtec.2016.05.026 ↗
32. Ultrafine-grained twinning-induced plasticity steel prepared by mechanical alloying and spark plasma sintering10.1016/j.msea.2021.142302 ↗
33. Strain rate effects on tensile deformation behaviors for Fe-22Mn-0.6C-(1.5Al) twinning-induced plasticity steel10.1016/j.msea.2014.04.043 ↗
34. Strain rate sensitivity and evolution of dislocations and twins in a twinning-induced plasticity steel10.1016/j.actamat.2015.01.013 ↗
35. Study of dislocation Ssubstructures in high-Mn steels after dynamic deformation tests10.12693/APhysPolA.130.942 ↗
36. Microstructure evolution ofultra‑high‑strength twinning‑induced plasticity (TWIP) steel underdynamic loading10.1007/s42243-020-00457-2 ↗
37. Microstructural aspects of energy absorption of high manganese steels10.1016/j.promfg.2018.12.049 ↗
38. Effect of ball milling time on the microstructure and compressive properties of the Fe-Mn-Al porous steel10.1007/s12613-022-2568-3 ↗
39. In situ synthesis of a porous high-Mn and high-Al steel by a novel two-step pore-forming technique in vacuum sintering10.1016/j.jmst.2019.09.008 ↗
40. Deformation behaviour of TWIP steels: constitutive modelling informed by local and integral experimental methods used in concert10.1016/j.matchar.2021.111667 ↗
41. Interaction between recovery, recrystallization, and NbC strain-induced precipitation in high-Mn steels10.1007/s11661-015-3066-2 ↗
42. Influence of microalloying additions (Nb, Ti, Ti/B, V and Mo) on the microstructure of TWIP steels10.1007/s13632-022-00871-w ↗
43. Effect of Nb-V microalloying on low-cycle fatigue property of Fe-Mn-Al-C austenitic steel10.1016/j.jmrt.2023.02.020 ↗
44. High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
45. Deformation behavior and tensile properties of an austenitic Fe-24Mn-4Cr-0.5C high-manganese steel: effect of grain size10.1016/j.msea.2018.10.107 ↗
46. Grain size effect on strain hardening in twinning-induced plasticity steels10.1016/j.scriptamat.2012.01.037 ↗
47. Microstructural factors dictating the initial plastic deformation behavior of an ultrafine-grained Fe-22Mn-0.6C TWIP steel10.1016/j.msea.2022.144506 ↗
48. Tensile stress-strain analysis of single-structure steels10.1007/s11661-006-0249-x ↗
49. Ductility and formability of three high-Mn TWIP steels in quasi-static and high-speed tensile and Erichsen tests10.1016/j.msea.2017.11.111 ↗
50. S.C. Shen, C.L. Wu, P. Xie, Y.R. Liu, Positive Strain Rate Sensitivity and Deformation Behavior of a Fe-29Mn-3Al-3Si TWIP Steel, Acta Metall. Sin. (Engl. Lett.) 35 (2022) 1825-1836.10.1007/s40195-022-01416-4 ↗
51. Comparison of work hardening and deformation twinning evolution in Fe-22Mn-0.6C-(1.5Al) twinning-induced plasticity steels10.1016/j.scriptamat.2013.02.060 ↗
52. The effect of grain size and grain orientation on deformation twinning in a Fe-22wt.%Mn-0.6wt.%C TWIP steel10.1016/j.msea.2010.02.041 ↗
53. Deformation characteristics of nanocrystalline TWIP steel under uniaxial tension and compression10.1016/j.mechmat.2019.103147 ↗
54. Dependence of deformation twinning on grain orientation in compressed high manganese steels10.1016/j.scriptamat.2007.02.028 ↗
55. Effect of grain boundary misorientation, deformation temperature and AlFeMnSi-phase on fatigue life of 6082 Al alloy10.1016/j.matchar.2017.01.002 ↗
56. An alternative model for the strain hardening of FCC alloys that twin, validated for twinning-induced plasticity steel10.1016/j.scriptamat.2008.10.035 ↗
57. Study of internal stresses in a TWIP steel analyzing transient and permanent softening during reverse shear tests10.1007/s10853-010-4750-7 ↗
58. The effect of grain size on the twin initiation stress in a TWIP steel10.1016/j.actamat.2015.02.008 ↗
59. The effects of grain size on yielding, strain hardening, and mechanical twinning in Fe-18Mn-0.6C-1.5Al twinning-induced plasticity steel10.1016/j.msea.2015.11.096 ↗
60. Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe-Mn-C steel10.1016/j.msea.2006.12.170 ↗
61. Effect of WC nanoparticles on the thermal stability and mechanical performance of dispersion-reinforced Cu composites10.1016/j.scriptamat.2022.115030 ↗
62. Microstructure and mechanical properties of bulk nanostructured Cu-Ta alloys consolidated by equal channel angular extrusion10.1016/j.actamat.2014.04.074 ↗
63. Tailoring planar slip to achieve pure metal-like ductility in body-centred-cubic multiprincipal element alloys10.1038/s41563-023-01517-0 ↗
64. Effects of Ti content on the tensile ductility, lattice distortion and mechanical properties of VNbTaTi refractory high-entropy alloys10.1016/j.jmrt.2024.04.091 ↗
65. Precipitation hardening of a FeMnC TWIP steel by vanadium carbides, pro ceedings of the 15th international conference on strength of materials (ICSMA-15)
66. Role of vanadium additions on tensile and cryogenic-temperature charpy impact properties in hot-rolled high-Mn austenitic steels10.1016/j.msea.2021.141063 ↗
67. Role of nanoscale ordering transformation in the design of a strong quadruplex lightweight steel10.1016/j.scriptamat.2025.116600 ↗
68. Interactions between deformation-induced defects and carbides in a vanadium-containing TWIP steel10.1016/j.scriptamat.2012.02.002 ↗
69. The structure of carbides in alloy steels
70. Multiple morphologies and twin structure generated by a definite growth behavior of grain boundary M23C6 in tempered Fe-15Mn-3Al-0.7C steel10.1016/j.jmrt.2023.12.009 ↗
71. The observation of the structure of M23C6/γ coherent interface in the 100Mn13 high carbon high manganese steel10.1007/s11661-017-4462-6 ↗
72. Characterization of M23C6 carbides precipitating at grain boundaries in 100Mn13 steel10.1007/s11661-016-3656-7 ↗