Strain visualization of DED 316 steel via Digital image correlation and Fourier Transform analysis: effects of hydrogen and heat treatment
Source abstract
Abstract
• Hydrogen embrittlement (HE) sensitivity was reduced for AM-DED 316 by heat treatment. • Heat treatment induced microstructural changes and reduced 2 types of dislocation and density via 3 comparative methods. • Dynamic strain evolution was analyzed by DIC, and 2D Fourier Transform was performed to study the Strain-frequency ratio. This study investigates the influence of heat treatment at different temperatures (600, 800, and 1200 °C) on the microstructure, dislocation stability, and element segregation of 316L stainless steel fabricated by direct energy deposition. To understand how these changes affect hydrogen embrittlement resistance and the mechanical properties of the samples, tensile testing and digital image correlation (DIC) were employed to examine the strain/instability evolution under combined conditions after heat treatment and hydrogen charging. Results show that dislocation densities decreased after heat treatment, which in turn increased the hydrogen embrittlement resistance of samples with emergence of recrystallization and twin grains. DIC revealed that heat-treated samples exhibited more strain hotspots, which initiated and developed more extensively compared to as-received (AR) samples. In comparison, AR samples showed fewer sites of strain accumulation, leading to wider crack propagation and earlier failure. Hydrogen-charged specimens exhibited narrower strain ranges and more localized strain distributions, indicating a shift toward brittle fracture behavior. In contrast, hydrogen-free samples exhibited higher mean magnitude values and spatial variation across the range of spatial frequencies, as confirmed by two-dimensional Fourier Transform analysis. The methods and analyses in this paper provide a new perspective on evaluating hydrogen embrittlement via demystifying strain/instability evolution.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Structural integrity and mechanical properties of the functionally graded material based on 316L/IN718 processed by DED technology10.1016/j.msea.2021.141038 ↗
2. P.J. Maziasz, J.T. Busby, 2.09 - Properties of Austenitic Steels for Nuclear Reactor Applications, in Comprehensive Nuclear Materials, R.J.M. Konings, Editor. 2012, Elsevier: Oxford. p. 267-283.10.1016/B978-0-08-056033-5.00019-7 ↗
3. Metal additive manufacturing in the commercial aviation industry: a review10.1016/j.jmsy.2019.08.005 ↗
4. Influence of hydrogen uptake on additively manufactured and conventional austenitic stainless steels 316L
5. Thermal stability of dislocation structure and its effect on creep property in austenitic 316L stainless steel manufactured by directed energy deposition10.1016/j.msea.2023.144981 ↗
6. Parametric study of development of Inconel-steel functionally graded materials by laser direct metal deposition10.1016/j.matdes.2013.08.079 ↗
7. Understanding and detection of process instabilities in wire arc directed energy deposition additive manufacturing using meltpool imaging and machine learning10.1016/j.matdes.2025.114598 ↗
8. Effect of heat treatments on 316 stainless steel parts fabricated by wire and arc additive manufacturing : Microstructure and synchrotron X-ray diffraction analysis
9. An investigation on the effect of deposition pattern on the microstructure, mechanical properties and residual stress of 316L produced by Directed Energy Deposition10.1016/j.msea.2020.139179 ↗
10. Enhanced hydrogen embrittlement resistance of directed energy deposition 316 L by post-manufacturing heat treatment10.1038/s41529-025-00590-x ↗
11. Hydrogen embrittlement of 3-D printing manufactured austenitic stainless steel part for hydrogen service10.1016/j.scriptamat.2016.11.020 ↗
12. Investigation of hydrogen embrittlement properties of Ni-based alloy 718 fabricated via laser powder bed fusion10.1016/j.ijhydene.2022.04.045 ↗
13. Defect tolerance and hydrogen susceptibility of the fatigue limit of an additively manufactured Ni-based superalloy 71810.1016/j.ijfatigue.2020.105740 ↗
14. New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion10.1016/j.actamat.2020.11.018 ↗
15. Effect of additive manufacturing and subsequent heat and/or surface treatment on the hydrogen embrittlement sensitivity of 316L austenitic stainless steel10.1016/j.ijhydene.2023.05.215 ↗
16. Y.M. Wang, et al., Additively Manufactured Hierarchical Stainless Steels with High Strength and Ductility, 17, 1, 2018, 63–71.10.1038/nmat5021 ↗
17. L. Margulies, G. Winther, H.F. Poulsen, In Situ Measurement of Grain Rotation During Deformation of Polycrystals. 2001. 291(5512): p. 2392–2394.10.1126/science.1057956 ↗
18. Hydrogen embrittlement susceptibility of additively manufactured 316L stainless steel: Influence of post-processing, printing direction, temperature and pre-straining
19. Role of printing density in internal defect evolution and hydrogen embrittlement of PBF-LB 316L stainless steel fabricated from recycled powder10.1016/j.matdes.2025.114506 ↗
20. Experimental measurement of dislocation density in metallic materials: a quantitative comparison between measurements techniques (XRD, R-ECCI, HR-EBSD, TEM)10.1016/j.matchar.2023.112842 ↗
21. Viewpoint: experimental recovery of geometrically necessary dislocation density in polycrystals10.1016/S1359-6462(02)00340-8 ↗
22. Resolving the geometrically necessary dislocation content by conventional electron backscattering diffraction10.1016/j.scriptamat.2008.01.050 ↗
23. J. Wheeler, et al., The weighted Burgers vector: a new quantity for constraining dislocation densities and types using electron backscatter diffraction on 2D sections through crystalline materials. 2009. 233(3): p. 482-494.10.1111/j.1365-2818.2009.03136.x ↗
24. Determination of elastic strain fields and geometrically necessary dislocation distributions near nanoindents using electron back scatter diffraction10.1080/14786430903304145 ↗
25. C. Ernould, et al., Chapter Five - Applications of the method, in Advances in Imaging and Electron Physics, M. Hÿtch and P.W. Hawkes, Editors. 2022, Elsevier. p. 155-215.10.1016/bs.aiep.2022.07.005 ↗
26. Mechanism-based strain gradient plasticity— I. Theory10.1016/S0022-5096(98)00103-3 ↗
27. Enabling quantitative analysis of in situ TEM experiments: a high-throughput, deep learning-based approach tailored to the dynamics of dislocations10.1016/j.actamat.2024.120455 ↗
28. Ncorr: Open-Source 2D Digital image Correlation Matlab Software10.1007/s11340-015-0009-1 ↗
29. Microstructural development in DED stainless steels: applying welding models to elucidate the impact of processing and alloy composition10.1007/s10853-020-05232-y ↗
30. Strengthening mechanism of a Ni-based superalloy prepared by laser powder bed fusion: the role of cellular structure10.1016/j.matdes.2023.112396 ↗
31. Flow behavior and microstructure evolution during dynamic deformation of 316L stainless steel fabricated by wire and arc additive manufacturing10.1016/j.matdes.2020.109325 ↗
32. Assessment of geometrically necessary dislocation levels derived by 3D EBSD10.1016/j.actamat.2015.06.051 ↗
33. In-situ neutron diffraction revealing microstructure changes during laser powder bed fusion and in-situ laser heat treatments of 316L and 316L-Al110.1016/j.matdes.2025.113727 ↗
34. Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting10.1016/j.msea.2019.01.110 ↗
35. High strength and ductility of additively manufactured 316L stainless steel explained10.1007/s11661-018-4607-2 ↗
36. Dislocation network in additive manufactured steel breaks strength–ductility trade-off10.1016/j.mattod.2017.11.004 ↗
37. Transformation of austenite to duplex austenite-ferrite assembly in annealed stainless steel 316L consolidated by laser melting10.1016/j.jallcom.2015.01.249 ↗
38. Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L10.1016/j.actamat.2020.07.063 ↗
39. Atomic-scale investigation of deep hydrogen trapping in NbC/α-Fe semi-coherent interfaces10.1016/j.actamat.2020.09.031 ↗
40. On the thermal stability of dislocation cellular structures in additively manufactured austenitic stainless steels: roles of heavy element segregation and stacking fault energy10.1007/s11837-020-04427-7 ↗
41. Building rate effect on microstructure and high temperature mechanical properties of Austenitic 316L stainless steel manufactured by laser directed energy deposition10.1016/j.optlastec.2023.110535 ↗
42. On the evaluation of the Bauschinger effect in an austenitic stainless steel—The role of multi-scale residual stresses10.1016/j.ijplas.2016.05.009 ↗
43. Theoretical model for hydrogen environment embrittlement in metastable austenitic stainless steel10.1016/j.matdes.2025.114268 ↗
44. A. Barnoush, H.J.A.M. Vehoff, Recent developments in the study of hydrogen embrittlement: Hydrogen effect on dislocation nucleation. 2010. 58(16): p. 5274-5285.10.1016/j.actamat.2010.05.057 ↗
45. Stacking fault energy decrease in austenitic stainless steels induced by hydrogen pairs formation10.1016/S1359-6462(98)00285-1 ↗
46. Molecular dynamics simulation of Surface-Adsorbed-Hydrogen-Induced Dislocation Motion in a thin film10.1016/j.commatsci.2019.109240 ↗
47. First-principles study of hydrogen trapping and diffusion at grain boundaries in γ-Fe10.1016/j.ijhydene.2020.11.238 ↗
48. The effect of hydrogen concentration on the fracture surface of medium Mn steels10.1016/j.engfailanal.2019.104263 ↗
49. Hydrogen embrittlement and hydrogen diffusion behavior in interstitial nitrogen-alloyed austenitic steel10.1016/j.ijhydene.2021.07.084 ↗
50. Hydrogen embrittlement and hydrogen-induced crack initiation in additively manufactured metals: a critical review on mechanical and cyclic loading10.1016/j.ijhydene.2024.01.232 ↗
51. Hydrogen embrittlement as a conspicuous material challenge–comprehensive review and future directions10.1021/acs.chemrev.3c00624 ↗
52. Influence of hydrogen-enhanced plasticity and decohesion mechanisms of hydrogen embrittlement on the fracture resistance of steel10.1016/j.engfailanal.2021.105312 ↗
53. Hydrogen embrittlement of additively manufactured austenitic stainless steel 316L10.1016/j.corsci.2021.109790 ↗