Strengthened forced convection – A novel method for improving the pitting corrosion resistance of friction-surfaced stainless steel coating
Source abstract
Abstract
During friction surfacing (FS), argon is commonly used as shielding gas for avoiding oxidation, and the resistance of FSed 316L coatings to pitting corrosion is normally improved by the fragmentation of MnS inclusions. In the present study, it is demonstrated that the resistance of the FSed coating to pitting corrosion could be further improved using strengthened forced convection (SFC) with argon shielding. Restoration and further growth of dynamically recrystallized grains under SFC relieve the elastic strain in {111} grains, decrease the dislocation density, and hence reduce the metastable pit initiation probability effectively and suppress the stable pit transition susceptibility slightly.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Mechanical stress and fatigue analysis · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. Davis · 2010
2. Characterization of friction surfaced coatings of AISI 316 tool over high-speed-steel substrate10.21278/TOF.41206 ↗
3. Microstructure and mechanical properties of friction stir processed AISI316L stainless steel10.1016/j.matdes.2014.10.082 ↗
4. Corrosion performance of AISI 316L friction surfaced coatings10.1016/j.corsci.2012.04.050 ↗
5. Corrosion resistance of friction surfaced AISI 304 stainless steel coatings10.1007/s11665-012-0270-8 ↗
6. Microstructural evolution and mechanical properties of the stir zone in friction stir processed AISI201 stainless steel10.1016/j.matdes.2016.05.106 ↗
7. Grain structure development during friction stir welding of single-crystal austenitic stainless steel10.1007/s11661-013-1692-0 ↗
8. Dynamic recrystallization in friction surfaced austenitic stainless steel coatings10.1016/j.matchar.2012.09.001 ↗
9. Rapid formation of the sigma phase in 304 stainless steel during friction stir welding10.1016/j.scriptamat.2003.08.022 ↗
10. The roles of macrosegregation and of dendritic array spacings on the electrochemical behavior of an Al–4.5 wt.% Cu alloy10.1016/j.electacta.2006.10.004 ↗
11. The correlation between electrochemical corrosion resistance and mechanical strength of As-cast Al-Cu and Al-Si alloys10.1016/S1452-3981(23)19680-5 ↗
12. Crystallographic effects in corrosion of austenitic stainless steel 316L10.1002/maco.201408002 ↗
13. Fabrication of stainless steel 316L/TiB2 composite coating via friction surfacing10.1016/j.surfcoat.2018.03.065 ↗
14. Spindle speed in friction surfacing of 316L stainless steel – how it affects the microstructure, hardness and pitting corrosion resistance10.1016/j.surfcoat.2019.01.055 ↗
15. Metastable pitting corrosion of stainless steel and the transition to stability
16. Effect of grain size on pitting corrosion of 304L austenitic stainless steel10.1016/j.corsci.2015.02.024 ↗
17. Effects of sensitization on the metastable pitting corrosion of 304 stainless steel10.20964/2018.07.74 ↗
18. Pitting corrosion of cold rolled solution treated 17-4 PH stainless steel10.1016/j.corsci.2013.11.039 ↗
19. Microstructure and mechanical properties of hybrid laser-friction stir welding between AA6061-T6 Al alloy and AZ31 Mg alloy10.1016/S1005-0302(11)60049-2 ↗
20. Analysis and comparison of friction stir welding and laser assisted friction stir welding of aluminum alloy10.3390/ma6125923 ↗
21. Influence of external cooling configuration on friction surfacing of AA6082 T6 over AA2024 T35110.1016/j.mfglet.2015.04.004 ↗
22. Underwater friction surfacing10.1179/026708400322911483 ↗
23. Hardfacing by low-pressure friction surfacing
24. The effect of metal type and multi-layering on friction surfacing10.1016/0924-0136(95)02057-8 ↗
25. Study of the interfacial phenomena during friction surfacing of mild steel with tool steel and Inconel10.1023/A:1004338210262 ↗
26. Cengel · 2010
27. The role of process temperature and rotational speed in the microstructure evolution of Ti-6Al-4V friction surfacing coatings10.1016/j.matdes.2016.07.132 ↗
28. ASTM Standard G61-86 · 2014
29. Introduction to Stainless Steels
30. Performance analysis of friction surfacing10.1016/j.jmatprotec.2012.03.013 ↗
31. Differences between secondary and primary flash formation on coating of HSS with AISI 316 using friction surfacing10.1007/s40194-014-0148-5 ↗
32. Friction surfaced tool steel (H13) coatings on low carbon steel: a study on the effects of process parameters on coating characteristics and integrity10.1016/j.surfcoat.2010.06.052 ↗
33. Influence of rotational speed on process characteristics in friction surfacing of Ti-6Al-4V10.1080/10426914.2016.1257799 ↗
34. Transferring mechanism of the coating rod in friction surfacing10.1016/j.surfcoat.2007.08.024 ↗
35. Experiments on heat generated during plastic deformation and stored energy for TRIP steels10.1016/j.matdes.2008.04.048 ↗
36. On the strain and strain rate dependence of the fraction of plastic work converted to heat: an experimental study using high speed infrared detectors and the Kolsky bar10.1016/0167-6636(94)90054-X ↗
37. Determination of temperature rise during high strain rate deformation10.1016/S0167-6636(97)00036-7 ↗
38. Mechanical properties of Austenitic Stainless Steel 304L and 316L at elevated temperatures10.1016/j.jmrt.2015.04.001 ↗
39. Heat transfer on a radially rotating heated cylinder10.1016/j.icheatmasstransfer.2008.08.002 ↗
40. Investigation on the air flow and heat transfer from a horizontal rotating cylinder10.1016/j.ijthermalsci.2015.03.017 ↗
41. Viscosity and thermal conductivity equations for nitrogen, oxygen, argon and air10.1023/B:IJOT.0000022327.04529.f3 ↗
42. Cushman-Roisin · 2014
43. Pope · 2012
44. Dependence of Zener parameter on the nanograins formed during friction stir processing of interstitial free steels10.1016/j.msea.2011.02.069 ↗
45. Friction stir welding and processing10.1016/j.mser.2005.07.001 ↗
46. Dynamic recovery and dynamic recrystallization competition on a Nb- and N-bearing austenitic stainless steel biomaterial: influence of strain rate and temperature10.1016/j.msea.2013.06.037 ↗
47. Revisiting stacking fault energy of steels10.1007/s11661-015-3266-9 ↗
48. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
49. Microstructural study on dynamic recrystallization and texture formation in pure nickel10.2320/matertrans.43.1183 ↗
50. A review of strain analysis using electron backscatter diffraction10.1017/S1431927611000055 ↗
51. Kocsisova · 2014 · 22
52. Effect of friction stir welding parameters on micr\ostructural characteristics and mechanical properties of 2219-T6 aluminum alloy joints10.1007/s12289-011-1048-5 ↗
53. The initiation of pitting corrosion at MnS inclusions10.1016/0010-938X(93)90279-P ↗
54. A comparison of the general and localized corrosion resistance of conventional and rapidly solidified AISI 303 stainless steel10.5006/1.3584897 ↗
55. The initiation of pitting corrosion on austenitic stainless steel: on the role and importance of sulphide inclusions10.1016/0010-938X(92)90074-D ↗
56. Initiation of corrosion pits at inclusions on 304 stainless steel10.1149/1.2048462 ↗
57. Effects of corrosion and cracking of sulfide inclusions on pit initiation in stainless steel10.1149/2.0831410jes ↗
58. Transformation of delta-ferrite during the postweld heat treatment of type 316L stainless steel weld metal
59. The deformation of low-stacking-fault-energy austenitic steels10.1007/BF02700983 ↗
60. The orientation and strain dependence of dislocation structure evolution in monotonically deformed polycrystalline copper10.1016/j.ijplas.2015.02.005 ↗
61. Evolution of intragranular stresses and dislocation densities during cyclic deformation of polycrystalline copper10.1016/j.actamat.2015.04.031 ↗
62. Measurement of residual elastic strain and lattice rotations with high resolution electron backscatter diffraction10.1016/j.ultramic.2011.05.007 ↗
63. A mechanical–electrochemical approach for the determination of precursor sites for pitting corrosion at the microscale10.1149/1.2218762 ↗
64. Influence of the grain orientation spread on the pitting corrosion resistance of duplex stainless steels using electron backscatter diffraction and critical pitting temperature test at the microscale10.1016/j.corsci.2012.11.013 ↗
65. Effect of residual stress on the corrosion behavior of austenitic stainless steel10.4236/aces.2015.51007 ↗
66. Critical conditions for pit initiation and growth of austenitic stainless steels10.1016/j.corsci.2014.12.006 ↗
67. Passivity breakdown of 316L stainless steel during potentiodynamic polarization in NaCl solution10.1016/j.corsci.2016.06.011 ↗
68. Stochastic studies of passivity breakdown10.1016/0010-938X(90)90140-Z ↗
69. Initiation of pitting at sulfide inclusions in stainless steel10.1149/1.2401840 ↗
70. Explanation for initiation of pitting corrosion of stainless steels at sulfide inclusions10.1149/1.1393431 ↗
71. Metastable pitting corrosion of 304 stainless steel in 3.5% NaCl solution10.1016/j.corsci.2014.04.033 ↗
72. Real time pit initiation studies on stainless steels: the effect of sulphide inclusions10.1016/j.corsci.2006.10.025 ↗
73. Diffusion of chromium in nanocrystalline iron produced by means of surface mechanical attrition treatment10.1016/S1359-6454(03)00260-X ↗
74. Grain size distribution effects on the corrosion behaviour of materials10.1016/j.corsci.2012.04.040 ↗
75. Effect of grain size on corrosion: a review10.5006/1.3462912 ↗
76. Effect of temperature and chloride ion concentration on corrosion of passive films on nano/ultrafine grained stainless steels10.1007/s11665-013-0818-2 ↗
77. The effect of residual stress on the electrochemical corrosion behavior of Fe-based amorphous coatings in chloride-containing solutions10.1016/j.surfcoat.2016.05.034 ↗
78. Passivity breakdown, pit initiation and propagation of pits in metallic materials – review10.1016/j.corsci.2014.10.006 ↗
79. Corrosion behavior of nanocrystalline copper foil in sodium hydroxide solution10.1016/j.scriptamat.2006.11.007 ↗