journal article·2025-12Open access

Stereocomplexed polylactic acid porous fibres for high-temperature filtration

Renzhi Li, Yangyang Feng, Song Zhang, Xuzhao Liu, Jun Song, Zixin Wang, Constantinos Soutis, Hugh Gong, Jiashen Li

Materials & Design· Volume 260

Abstract

• SC-PLA has been proven to remain stable in 150 °C high-temperature filtration. • A strategy was proposed by manipulating the molecular weight of PLA to form porous fibres. • The porous structure improved the PM 0.3 filtration efficiency of fibrous membranes to over 97%. • The toughness of porous fibrous membranes was increased by 79%. The growing demand for sustainable air filtration media has sparked interest in replacing traditional non-biodegradable filters with biodegradable materials. In this paper, a strategy was developed to regulate the fibre morphology of poly(L-lactic acid) (PLLA)/ poly(D-lactic acid) (PDLA) electrospun membranes by manipulating the molecular weights of the fibres. The strategy involved plasticisation of short PDLA chains and selective solvent-polymer interactions, which induced swelling and recrystallisation of the polymer chains to introduce a porous structure into the fibres and increase the tensile toughness of the fibrous membranes by 79 %. The porous fibres enlarged the specific surface area of the membranes and increased the PM 0.3 (particulate matter with a diameter of less than 0.3 μm) removal with a filtration efficiency (η) from around 86 % to over 97 %. In addition, the exclusive stereocomplex-crystallites in the porous fibre membranes enabled the fibres to maintain high filtration efficiencies during continuous filtration at a relatively high temperature of 150 °C. Enhanced toughness, excellent fine particle capture, and outstanding thermal stability make porous PLLA/PDLA fibrous membranes a biodegradable alternative to currently high temperature air filtration materials.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Membrane Separation Technologies · Polymer Foaming and Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Cardiovascular disease burden from ambient air pollution in Europe reassessed using novel hazard ratio functions10.1093/eurheartj/ehz135 ↗
2. Multi-component nanofiber composite membrane enabled high PM0. 3 removal efficiency and oil/water separation performance in complex environment10.1016/j.jhazmat.2021.126835 ↗
3. Electrospinning of nanofibrous membrane and its applications in air filtration: a review10.3390/nano11061501 ↗
4. Yu Z, Fan T, Liu Y, Li L, Liu J, Yang B, Ramakrishna S, Long Y-Z (2024) Efficient air filtration through advanced electrospinning techniques in nanofibrous Materials: A review. Separation and Purification Technology:127773.10.1016/j.seppur.2024.127773 ↗
5. Nanoporous PLA/(chitosan nanoparticle) composite fibrous membranes with excellent air filtration and antibacterial performance10.3390/polym10101085 ↗
6. High-performance filter membrane composed of oxidized Poly (arylene sulfide sulfone) nanofibers for the high-efficiency air filtration10.1016/j.jhazmat.2021.126033 ↗
7. Lotus leaf-inspired poly (lactic acid) nanofibrous membranes with enhanced humidity resistance for superefficient PM filtration and high-sensitivity passive monitoring10.1016/j.jhazmat.2025.137516 ↗
8. Electroactive and breathable protective membranes by surface engineering of dielectric nanohybrids at poly (lactic acid) nanofibers with excellent self-sterilization and photothermal properties10.1016/j.seppur.2024.126708 ↗
9. Stereocomplexation-enhanced electroactivity of poly (lactic acid) nanofibrous membranes for long-term PM capturing and remote respiratory monitoring10.1021/acssuschemeng.3c06327 ↗
10. Hierarchical porous poly (l-lactic acid) nanofibrous membrane for ultrafine particulate aerosol filtration10.1021/acsami.9b18083 ↗
11. Preparation of hierarchical structured nano-sized/porous poly (lactic acid) composite fibrous membranes for air filtration10.1016/j.apsusc.2015.08.211 ↗
12. Stereocomplex formation between enantiomeric poly (lactides)10.1021/ma00170a034 ↗
13. A biodegradable stereo-complexed poly (Lactic Acid) drinking straw of high heat resistance and performance10.3390/ma16062438 ↗
14. Extreme orientation of stereocomplexed poly (lactic acid) induced ultrafine electroactive nanofibers for respiratory healthcare and intelligent diagnosis
15. Bicomponent PLA nanofiber nonwovens as highly efficient filtration media for particulate pollutants and pathogens10.3390/membranes11110819 ↗
16. Self-crystal electret poly (lactic acid) nanofibers for high-flow air purification and AI-assisted respiratory diagnosis10.1016/j.jhazmat.2024.136932 ↗
17. Li R, Feng Y, Zhang S, Soutis C, Gong RH (2024) Controllable porous structure polylactide self-reinforced composites with a large processing temperature window. Composites Part B: Engineering:111996.10.2139/ssrn.4995581 ↗
18. One-step fabrication of polylactic acid (PLA) nanofibrous membranes with spider-web-like structure for high-efficiency PM0. 3 capture10.1016/j.jhazmat.2023.133232 ↗
19. The effect of thick fibers and large pores of electrospun poly (ε-caprolactone) vascular grafts on macrophage polarization and arterial regeneration10.1016/j.biomaterials.2014.03.078 ↗
20. Electroactive and antibacterial wound dressings based on Ti3C2T x MXene/poly (ε-caprolactone)/gelatin coaxial electrospun nanofibrous membranes10.1007/s12274-023-5527-z ↗
21. Tuning structural-response of PLA/PCL based electrospun nanofibrous mats: Role of dielectric-constant and electrical-conductivity of the solvent system10.1080/09205063.2022.2073427 ↗
22. Electrospun poly lactic acid (PLA) fibres: effect of different solvent systems on fibre morphology and diameter10.1016/j.polymer.2014.06.032 ↗
23. Sharma D, Satapathy BK (2022) Optimization and physical performance evaluation of electrospun nanofibrous mats of PLA, PCL and their blends. Journal of Industrial Textiles 51 (4_suppl):6640S-6665S.10.1177/1528083720944502 ↗
24. Glöckner G (2000) Gradient polymer chromatography: liquid chromatography.10.1016/B0-12-226770-2/01851-2 ↗
25. Marcilla A, Beltrán M (2023) 5 - MECHANISMS OF PLASTICIZERS ACTION. In: Wypych G (ed) Handbook of Plasticizers (Fourth Edition). ChemTec Publishing, pp 139-158. doi:https://doi.org/10.1016/B978-1-77467-022-4.50008-7.10.1016/B978-1-77467-022-4.50008-7 ↗
26. Fracture toughness of hybrid carbon fibre/epoxy enhanced by graphene and carbon nanotubes10.1007/s10443-021-09906-x ↗
27. Clavilier · 2025
28. Manipulating poly (lactic acid) surface morphology by solvent-induced crystallization10.1016/j.apsusc.2012.08.050 ↗
29. The morphology and spherulite growth of PLA stereocomplex in linear and branched PLLA/PDLA blends: effects of molecular weight and structure10.1039/C5CE02017D ↗
30. Palak H, Güler E, Nofar M, Karagüzel Kayaoğlu B (2022) Effects of D-lactide content and molecular weight on the morphological, thermal, and mechanical properties of electrospun nanofiber polylactide mats. Journal of Industrial Textiles 51 (2_suppl):3030S-3056S.10.1177/15280837221090260 ↗
31. Role of chain entanglements on fiber formation during electrospinning of polymer solutions: good solvent, non-specific polymer–polymer interaction limit10.1016/j.polymer.2005.03.011 ↗
32. Deciphering the code of poly (l‐lactic acid) Monofilament achieving orientation limit10.1002/smll.202504025 ↗
33. Nonsolvent-induced morphological changes and nanoporosity in poly (l-lactide) films10.1039/C8SM00041G ↗
34. Solvent-induced crystallization behaviors of PLLA ultrathin films investigated by RAIR spectroscopy and AFM measurements10.1021/jp506840e ↗
35. Hierarchical polymeric textures via solvent-induced phase transformation: a single-step production of large-area superhydrophobic surfaces10.1016/j.colsurfa.2011.11.014 ↗
36. Gránásy L, Pusztai T, Tegze G, Warren JA, Douglas JF (2005) Growth and form of spherulites. Physical Review E—Statistical, Nonlinear, and Soft Matter Physics 72 (1):011605.10.1103/PhysRevE.72.011605 ↗
37. Stereocomplex-and homo-crystallization behavior, polymorphism, and thermal properties of enantiomeric random copolymers of L-and D-lactic acids from the melt10.1016/j.polymer.2021.123954 ↗
38. Development of highly oil-absorbent polylactic-acid microfibers with a nanoporous structure via simple one-step centrifugal spinning10.1016/j.seppur.2021.120156 ↗
39. The crystallization behavior of poly (L-lactic acid)/poly (D-lactic acid) electrospun fibers: effect of distance of isomeric polymers10.1021/acs.iecr.0c00625 ↗
40. Piezoelectric poly (lactide) stereocomplexes with a cholinium organic ionic plastic crystal10.1039/C7TC03484A ↗
41. Polylactic acid/multi-wall carbon nanotubes composite fibrous membrane and their applications in oil-water separation
42. Stereocomplexation of solvent‐cast poly (lactic acid) by addition of non‐solvents10.1002/pi.3190 ↗
43. Influence of particle size on the low-temperature nitrogen adsorption of deep shale in southern Sichuan, China10.3390/min12030302 ↗
44. High surface area and interconnected nanoporosity of clay-rich astromaterials10.1038/s41598-024-61114-2 ↗
45. Aerosol filtration efficiency of common fabrics used in respiratory cloth masks10.1021/acsnano.0c03252 ↗
46. Impact of washing cycles on the performances of face masks10.1016/j.jaerosci.2021.105914 ↗
47. Modeling pressure drop values across ultra-thin nanofiber filters with various ranges of filtration parameters under an aerodynamic slip effect10.1038/s41598-023-32765-4 ↗
48. Polylactic acid-based composite filter with multi-gradient structure developed for high-efficiency particulate matter filtration and NH3 purification10.1016/j.seppur.2024.129354 ↗
49. Air filtration and antimicrobial capabilities of electrospun PLA/PHB containing ionic liquid10.1016/j.seppur.2015.09.037 ↗
50. Characterization and filtration efficiency of sustainable PLA fibers obtained via a hybrid 3D-printed/electrospinning technique10.3390/ma14226766 ↗
51. Electroactive, antibacterial, and biodegradable poly (lactic acid) nanofibrous air filters for healthcare10.1021/acsami.3c05834 ↗
52. Review of filters for air sampling and chemical analysis in mining workplaces10.3390/min12101314 ↗
53. Development of eco-efficient micro-porous membranes via electrospinning and annealing of poly (lactic acid)10.1016/j.memsci.2013.02.037 ↗