Thermo-elastic topology optimization and experimental characterization for multiphase structure with high thermal stiffness invariability
Source abstract
Abstract
• The concept for engineering structures with high thermal stiffness invariability is summarized and raised, and a new topology optimisation framework for design of multiphase structure with high thermal stiffness invariability (HTSI) is developed, • 2D numerical cases show that the thermal induced stiffness fluctuations of 2D multiphase structures acquired by the HTSI design were reduced by 5.13 % and 20.3 % in the 2D cantilever and MBB beam, respectively, when compared to those produced via the general thermo-elastic (GTE) design, • 3D numerical case with experiments shows that the 3D multiphase structure using the HTSI design can reduce thermal induced stiffness fluctuation by 24.4% when compared to the GTE design. Engineering structures are expected to steadily sustain a load with minimal deformation when subjected to thermal variation. In this study, we propose a multiphase structure with high thermal stiffness invariability (HTSI) and develop a method to topologically design such a structure using discrete material optimization (DMO). First, a series of quasi-static characterization tests under different temperatures was performed to assess the thermo-elastic properties of the multiphase material candidates. Second, an HTSI design method was proposed based on the multiphase material properties and DMO for acquiring both 2D and 3D multiphase structures. Last, a 3D multiphase structure was manufactured using additive manufacturing and corresponding experiments were performed to validate the effectiveness of the proposed method in the design of multiphase structures with HTSI. The results for 2D multiphase structures show that the HTSI design can ameliorate the fluctuation of structural compliance or stiffness when the temperature changes from 30 ℃ to 70 ℃. The fluctuations were reduced by 5.13 % and 20.3 % in the 2D cantilever and MBB beam, respectively, when compared to those produced via the general thermo-elastic (GTE) design. These results for designing 3D multiphase structures demonstrate that using the HTSI design can reduce thermally induced stiffness fluctuation by 24.4% when compared to the GTE design by experiments. The numerical accuracy was also validated with an error of only 7.7%.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Topology Optimization in Engineering · Composite Structure Analysis and Optimization · Composite Material Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Zhu · 2019
2. Mahieux · 1999
3. Numerical simulation of temperature induced structural static responses for long-span suspension bridge10.1016/j.proeng.2017.11.073 ↗
4. Thermal-structural design and optimization of engine exhaust-washed structures, 52nd AIAA/ASME/ASCE/AHS/ASC Structures
5. A review of print heads for fused filament fabrication of continuous carbon fiber-reinforced composites10.3390/mi15040432 ↗
6. 3D printing of continuous carbon fibre reinforced powder-based epoxy composites10.1016/j.coco.2022.101239 ↗
7. Lightweight 3D carbon fibre reinforced composite lattice structures of high thermal-dimensional stability10.1016/j.compstruct.2022.116471 ↗
8. 3D printed carbon-fibre reinforced composite lattice structures with good thermal-dimensional stability10.1016/j.compscitech.2022.109599 ↗
9. A review of topology optimization for additive manufacturing: status and challenges10.1016/j.cja.2020.09.020 ↗
10. Multi-material topology optimization for maximizing structural stability under thermo-mechanical loading10.1016/j.cma.2023.115938 ↗
11. Topology optimization of compliant mechanisms with desired structural stiffness10.1016/j.engstruct.2014.08.008 ↗
12. Multiscale topology optimisation for porous composite structures with stress-constraint and clustered microstructures10.1016/j.cma.2023.116329 ↗
13. Strength-based topology optimization for anisotropic parts
14. Robust topology optimization accounting for spatially varying manufacturing errors10.1016/j.cma.2011.08.006 ↗
15. Material interpolation schemes in topology optimization10.1007/s004190050248 ↗
16. A simple evolutionary procedure for structural optimization10.1016/0045-7949(93)90035-C ↗
17. Computational efficiency and validation of bi-directional evolutionary structural optimisation10.1016/S0045-7825(99)00309-6 ↗
18. Fronts propagating with curvature-dependent speed: Algorithms based on Hamilton-Jacobi formulations10.1016/0021-9991(88)90002-2 ↗
19. Doing topology optimization explicitly and geometrically—a new moving morphable components based framework10.1115/1.4027609 ↗
20. Topology optimal design of thermoelastic structures using a homogenization method
21. Displacement minimization of thermoelastic structures by evolutionary thickness design10.1016/S0045-7825(99)00047-X ↗
22. Topology optimization of thermoelastic structures using level set method10.1007/s00466-008-0287-x ↗
23. Topology optimization involving thermo-elastic stress loads10.1007/s00158-010-0527-5 ↗
24. Stress-based and robust topology optimization for thermoelastic multi-material periodic microstructures10.1016/j.cma.2021.113749 ↗
25. Robust topology optimization for structures under thermo-mechanical loadings considering hybrid uncertainties10.1007/s00158-021-03121-9 ↗
26. Topology optimization of thermo-elastic structures with multiple materials under mass constraint10.1016/j.compstruc.2016.06.002 ↗
27. Topology optimization of thermoelastic structures using MMV method10.1016/j.apm.2021.11.008 ↗
28. Reliability based topology optimization of thermoelastic structures using bi-directional evolutionary structural optimization method10.1007/s10999-023-09641-0 ↗
29. A multi-material topology optimization with temperature-dependent thermoelastic properties10.1080/0305215X.2021.1977291 ↗
30. Topology optimization of thermo‐elastic structures with temperature‐dependent material properties under large temperature gradient10.1002/nme.7304 ↗
31. Multi-functional thermal-mechanical anisotropic metasurface with shape memory alloy actuators10.1016/j.matdes.2022.110569 ↗
32. Compliance-based topology optimization of structural components subjected to thermo-mechanical loading10.1007/s00158-023-03563-3 ↗
33. Logan · 2002
34. Multi-material topology optimization using ordered SIMP interpolation10.1007/s00158-016-1513-3 ↗
35. PolyMat: an efficient Matlab code for multi-material topology optimization10.1007/s00158-018-2094-0 ↗
36. Discrete material optimization of general composite shell structures10.1002/nme.1259 ↗
37. Optimal shape design as a material distribution problem10.1007/BF01650949 ↗
38. Multi-material continuum topology optimization with arbitrary volume and mass constraints10.1016/j.cma.2018.01.032 ↗
39. Multi-material topology optimization with multiple volume constraints: a general approach applied to ground structures with material nonlinearity10.1007/s00158-017-1768-3 ↗
40. Property modeling across transition temperatures in polymers: a robust stiffness–temperature model10.1016/S0032-3861(00)00614-5 ↗
41. S.C. Garla Venkatakrishnaiah, H. Varadaraju, Validation of Black-and-White Topology Optimization Designs, 2021.
42. Multi-material topology optimization considering joint stiffness using a two-step filtering approach10.1016/j.finel.2021.103635 ↗