journal article·2025-10Open access

Synergistic Effects of Molten Salt Corrosion and Proton Irradiation on Grain Boundary Strength in Ni-20Cr

Fei Teng, Weiyue Zhou, Yingxin Zhu, Yachun Wang, Xiang Liu, Daniel Murray, Yang Yang, Michael P. Short, Lingfeng He

Materials & Design· Volume 258

Abstract

Nickel-based alloys are leading contenders for use as structural materials in molten salt reactors. While there have been extensive studies on the impact of fluoride/chloride-based molten salt corrosion on the microstructural evolution of various nickel-based alloys, the effects of simultaneous molten salt corrosion and radiation on the mechanical integrity of grain boundaries (GBs) remain underexplored. In this study, we use a Ni-20Cr model alloy to investigate this issue, subjecting it to simultaneous molten fluoride salt corrosion and proton irradiation. We performed cross-sectional and chemically-sensitive electron microscopy characterization of the microstructures of these materials, identifying the characteristic corrosion-induced microstructure and local chemical heterogeneity near GBs. After developing a sample preparation method for reliable characterization of GB strength, we assess the mechanical degradation of GBs using in situ push-to-pull micro tensile tests. Our findings reveal that voids induced by corrosion are the primary influence on the failure mode of GBs, regardless of whether proton irradiation is present. For materials that exhibit ductile fracture, those subjected to simultaneous corrosion and radiation exhibit lower yield strengths than those exposed to corrosion alone, which may be linked to the previously observed phenomenon of proton irradiation-decelerated intergranular corrosion in molten salt.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Molten salt reactors: a new beginning for an old idea10.1016/j.nucengdes.2009.12.033 ↗
2. Conceptual design study for heat exhaust management in the ARC fusion pilot plant10.1016/j.fusengdes.2018.09.007 ↗
3. Historical development of concentrating solar power technologies to generate clean electricity efficiently–a review10.1016/j.rser.2014.09.008 ↗
4. Heat transfer characteristics of a molten-salt thermal energy storage unit with and without heat transfer enhancement10.1016/j.apenergy.2014.10.004 ↗
5. Direct conversion of greenhouse gas CO2 into graphene via molten salts electrolysis10.1002/cssc.201501591 ↗
6. A review on molten salt synthesis of metal oxide nanomaterials: Status, opportunity, and challenge10.1016/j.pmatsci.2020.100734 ↗
7. The molten salt reactor (MSR) in generation IV: overview and perspectives10.1016/j.pnucene.2014.02.014 ↗
8. Molten fluorides for nuclear applications10.1016/S1369-7021(10)70222-4 ↗
9. An overview on the passivity of metals10.1016/0010-938X(90)90086-K ↗
10. Electrochemical study of the dissolution of oxide films grown on type 316L stainless steel in molten fluoride salt10.1016/j.corsci.2021.109457 ↗
11. D.E. Holcomb, S.M. Cetiner, An overview of liquid fluoride salt heat transport systems, (2010).10.2172/990239 ↗
12. Corrosion in the molten fluoride and chloride salts and materials development for nuclear applications10.1016/j.pmatsci.2018.05.003 ↗
13. Investigating corrosion behavior of Ni and Ni-20Cr in molten ZnCl210.1016/j.corsci.2020.109105 ↗
14. Materials corrosion in molten LiF–NaF–KF salt10.1016/j.jfluchem.2008.05.008 ↗
15. Measurement of grain boundary strength of Inconel X-750 superalloy using in-situ micro-tensile testing techniques in FIB/SEM system10.1016/j.msea.2022.143475 ↗
16. Proton irradiation-decelerated intergranular corrosion of Ni-Cr alloys in molten salt10.1038/s41467-020-17244-y ↗
17. K. Bawane, X. Liu, R. Gakhar, M. Woods, M. Ge, X. Xiao, W.-K. Lee, P. Halstenberg, S. Dai, S. Mahurin, S.M. Pimblott, J.F. Wishart, Y.-c.K. Chen-Wiegart, L. He, Visualizing time-dependent microstructural and chemical evolution during molten salt corrosion of Ni-20Cr model alloy using correlative quasi in situ TEM and in situ synchrotron X-ray nano-tomography, Corrosion Science 195 (2022).10.1016/j.corsci.2021.109962 ↗
18. Pitting corrosion of metals: a review of the critical factors10.1149/1.1838615 ↗
19. Effects of flow, Si inhibition, and concurrent corrosion of dissimilar metals on the corrosion of aluminium in the environment following a loss-of-coolant accident10.1016/j.corsci.2017.09.012 ↗
20. Morphological Evolution and Dealloying during Corrosion of Ni20Cr (wt.%) in Molten FLiNaK Salts10.1149/1945-7111/ad6037 ↗
21. Evolution of micro-pores in Ni–Cr alloys via molten salt dealloying10.1038/s41598-022-20286-5 ↗
22. Effect of grain refinement on the corrosion of Ni-Cr alloys in molten (Li,Na,K)F10.1016/j.corsci.2016.03.027 ↗
23. Elucidating the role of Cr migration in Ni-Cr exposed to molten FLiNaK via multiscale characterization10.1016/j.actamat.2024.120206 ↗
24. Measurement of europium (III)/europium (II) couple in fluoride molten salt for redox control in a molten salt reactor concept10.1016/j.jnucmat.2017.09.027 ↗
25. A simultaneous corrosion/irradiation facility for testing molten salt-facing materials10.1016/j.nimb.2018.11.024 ↗
26. SRIM–The stopping and range of ions in matter (2010)10.1016/j.nimb.2010.02.091 ↗
27. M. Norgett, M. Robinson, I. Torrens, Standard Practice for Neutron Radiation Damage Simulation by Charged-Particle Irradiation, Annual book of ASTM Standards (1975).
28. Mechanism for diffusion induced grain boundary migration10.1016/0001-6160(81)90073-0 ↗
29. Y. Yang, W. Zhou, S. Yin, S.Y. Wang, Q. Yu, M.J. Olszta, Y.-Q. Zhang, S.E. Zeltmann, M. Li, M. Jin, One Dimensional Wormhole Corrosion in Metals, arXiv preprint arXiv:2203.16312 (2022).10.1038/s41467-023-36588-9 ↗
30. Deformation twinning versus slip in Ni-based alloys, containing Pt2Mo-structured, Ni2Cr-typed precipitates10.1016/j.matdes.2021.109820 ↗
31. Redox potential control in molten salt systems for corrosion mitigation10.1016/j.corsci.2018.08.035 ↗
32. Corrosion of Incoloy 800H alloys with nickel cladding in FLiNaK salts at 850° C10.1016/j.corsci.2018.01.026 ↗
33. The effect of Cr alloying on defect migration at Ni grain boundaries
34. F. Lukáč, J. Čižek, I. Procházka, Y. Jirásková, D. Janičkovič, W. Anwand, G. Brauer, Vacancy-induced hardening in Fe-Al alloys, Journal of Physics: Conference Series, IOP Publishing, 2013, p. 012025.10.1088/1742-6596/443/1/012025 ↗