The structural regulation of H-bonding network in the chemically-bonded polyimide/silica nanocomposite with excellent mechanical stability and improved moisture resistance
Source abstract
Abstract
• The prepared Polyimide nanocomposite exhibits unique chemically-bonded structure, performing high T g of 442.5℃ and improved thermal stability. • The nanostructure of the polyimide is rich in hydroxyl functionalities, which promoted the regulation of H-bonding structure. • The rebuilt H-bonding network within polyimide nanocomposite performed excellent moisture resistance, i.e. reduced moisture absorption and weakened mechanical degradation. Polymer-based nanocomposites, being widely concerned for lightweight and high-strength functional materials, still exhibit irreversible failures to resist mechanical damage and water erosion. In this paper, a kind of hydroxyl-rich silica nanomaterial was prepared and used for fabricating the chemically-bonded polyimide (PI)/hydroxyl-rich silica (SiO 2 -OH) nanocomposite through the surface-initiated curing and the coupling reaction, which then regulate the H-bonding network within the PI matrix. As a result, the prepared nanocomposite performed excellent thermal stability ( T g reaches 442.5℃) and improved mechanical properties. The improved nano-construction incorporates the film with the rebuilt H-bonding network to improve the moisture resistance of the PI matrix. This work, focusing on the constitution of chemically-bonded silicon-containing nanocomposite structure, will promote an in-depth understanding of the relationship between structure and properties of polymer film materials, being beneficial for the development of modern polymer-based materials of long-term service life.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Synthesis and properties of polymers · Silicone and Siloxane Chemistry · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Thermal degradation behavior of carborane-containing phenylethynyl terminated imide systems10.1016/j.polymdegradstab.2016.05.006 ↗
2. High Tg and Thermo-Oxidatively Stable Thermosetting Polyimides Derived from a Carborane-Containing Diamine10.1002/marc.201800484 ↗
3. Remarkable gas separation performance of a thermally rearranged membrane derived from an alkynyl self-crosslinkable precursor10.1016/j.memsci.2023.121464 ↗
4. Post-polymerization modification of aromatic polyimides via Diels-Alder cycloaddition10.1002/pol.20210711 ↗
5. Characterization of multi-walled carbon nanotube/phenylethynyl terminated polyimide composites10.1016/j.compositesa.2003.09.003 ↗
6. High temperature resin/carbon nanotube composite fabrication10.1016/j.compscitech.2006.01.008 ↗
7. Incorporation of multi-walled carbon nanotubes into high temperature resin using dry mixing techniques10.1016/j.compositesa.2005.03.033 ↗
8. Thermomechanical properties of nanotubes in a thermosetting polyimide matrix: Relationship to the percolation threshold10.1016/j.compositesa.2014.02.009 ↗
9. Chemistry and properties of a phenylethynyl-terminated polyimide10.1002/(SICI)1097-4628(19960222)59:8<1249::AID-APP7>3.0.CO;2-C ↗
10. In situ synthesis and thermal, tribological properties of thermosetting polyimide/graphene oxide nanocomposites10.1007/s10853-011-5975-9 ↗
11. In situ synthesis and properties of PMR PI/SiO2 nanocomposites10.1002/app.35672 ↗
12. Synergistic effect of nano-SiO2 and graphene oxide: hybrid filled thermosetting polyimide nanocomposites with ultralow wear10.1088/2053-1591/ab4155 ↗
13. High wear-resistant performance of thermosetting polyimide reinforced by graphitic carbon nitride (g-C3N4) under high temperature10.1016/j.compositesa.2018.07.008 ↗
14. Enhancing thermo-oxidative stability of thermoset polyimide composites using nano neodymium oxide particles10.1016/j.jmrt.2021.07.115 ↗
15. Preparation and Properties of Modified Phenylethynyl Terminated Polyimide with Neodymium Oxide10.3390/ma15124148 ↗
16. W. Guzman, A. Griffin, M. Robertson, et al. Sub-nm Pore Size of Phenylethynyl End-Capped Imide OligomerDerived Carbon for Molecular Sorption and Separation. ACS Appl. Nano Mater 6(2023) 14957-14966.10.1021/acsanm.3c02516 ↗
17. Infrared Spectroscopy of Silica Sols - Effects of Water Concentration, Catalyst, and Aging
18. Hydrolysis-condensation reactions of TEOS in the presence of acetic acid leading to the generation of glass-like silica microspheres in solution at room temperature10.1039/b003221m ↗
19. H. Kaur, S. Chaudhary, H.n Kaur, M. Chaudhary, K.C. Jena. Hydrolysis and Condensation of Tetraethyl Orthosilicate at the Air-Aqueous Interface: Implications for Silica Nanoparticle Formation. ACS Appl. Nano Mater. 5(1) (2022) 411-422.10.1021/acsanm.1c03250 ↗
20. Dispersion of in-situ controllably grown nano-SiO2 in alkaline environment for improving cement paste10.1016/j.conbuildmat.2023.130460 ↗
21. Preparation of Hollow Nanostructured Si Spheres by Zincothermic Reduction of SiO2 to Si for Lithium-Ion Batteries10.1021/acsanm.2c04593 ↗
22. A solid-state 13C NMR study of the cure of 13C-labeled Phenylethynyl end-capped polyimides10.1021/ma991197m ↗
23. Curing reactions in acetylene-terminated resins. Part 2. - Differential scanning calorimetric, thermal gravimetric and thermomechanical analytical study of catalysed cure of an aryl prop-2-ynyl ether-terminated monomer10.1039/JM9930300027 ↗
24. Free-Radical Addition of Organic Disulfides to Acetylenes10.1021/jo01287a025 ↗
25. Synthesis of branched polypropylene by a reactive extrusion process10.1021/ma0109469 ↗
26. Disulfide-Catalyzed Visible-Light-Mediated Oxidative Cleavage of C=C Bonds and Evidence of an Olefin-Disulfide Charge-Transfer Complex10.1002/ange.201607948 ↗
27. A coupling strategy for excellent mechanical properties and enhanced interfacial performance of polyimide/carbon fiber composite with novel metal-free catalyzed-curing route10.1016/j.compscitech.2023.110188 ↗
28. Analysis of dimensionally stable copolyimide with a low-level residual stress10.1002/1099-0488(20010401)39:7<796::AID-POLB1054>3.0.CO;2-W ↗
29. Influence of Preparation Conditions on Microdomain Formation in Poly(urethane urea) Block Copolymers10.1021/ma010915d ↗
30. Design and analysis of experiments in silica filled natural rubber compounds-effect of castor oil10.1016/S0142-9418(03)00011-4 ↗
31. Radical-disulfide exchange in thiol-ene-disulfidation polymerizations10.1039/D2PY00172A ↗
32. A phosphorus/sulfur-containing compound toward simultaneously endowing epoxy resin with good flameretardancy and high transparency10.1002/app.52431 ↗
33. Sulphur-containing phenylethynyl terminated polyimide via chemical crosslinking method for excellent thermal properties and antibacterial performance10.1016/j.reactfunctpolym.2023.105550 ↗
34. Some basic aspects of flame resistance of polymeric materials10.1016/0032-3861(75)90157-3 ↗
35. Insightful characterization of sesamol-based polybenzoxazines: Effect of phenol and amine chain type on physical and nanomechanical properties10.1016/j.polymertesting.2022.107578 ↗
36. A. Al Arbash, Z. Ahmad, F. Al-Sagheer, A. A. M. Ali. Microstructure and Thermomechanical Properties of Polyimide-Silica Nanocomposites. Journal of Nanomaterials 1(2006) 1-9.10.1155/JNM/2006/58648 ↗
37. Preparation and Properties of Polyimide/Silica Hybrid Nanocomposites10.1002/pc.20232 ↗
38. Y. Kim, J. Kim, Shin-Woo Ha, D. Kwon, J. Lee. Polyimide nanocomposites with functionalized SiO2 nanoparticles: enhanced processability, thermal and mechanical properties. RSC Adv. 4(2014) 43371-43377.10.1039/C4RA04952G ↗
39. Synthesis and Thermal Curing of Aryl-Ethynyl-Terminated coPOSS Imide Oligomers: New Inorganic/Organic Hybrid Resins10.1021/cm020238h ↗
40. Synthesis of Aromatic Polyhedral Oligomeric SilSesquioxane (POSS) Dianilines for Use in High-Temperature Polyimides10.1007/s12633-012-9130-2 ↗
41. Polymer/SiO2 nanocomposites: Production and applications10.1016/j.pmatsci.2018.04.002 ↗
42. Preparation and mechanical properties of nano-silica/UPR polymer composite10.1515/secm-2013-0051 ↗
43. Dielectric properties of polyimide/SiO2 hollow spheres composite films with ultralow dielectric constant
44. Polyimide nanocomposites with functionalized SiO2 nanoparticles: enhanced processability, thermal and mechanical properties10.1039/C4RA04952G ↗
45. Synthesis and Properties of Polyimide Silica Nanocomposite Film with High Transparent and Radiation Resistance10.3390/nano11030562 ↗
46. Enhanced Mechanical and Thermal Properties of Polyimide Films Using Hydrophobic Fumed Silica Fillers10.3390/polym16020297 ↗
47. High Wear Resistance of POSS Grafted-Polyimide/Silica Composites under Atomic Oxygen Conditions10.3390/polym15102385 ↗
48. G. Baschek, G. Hartwiga, F. Zahradnik. Effect of water absorption in polymers at low and high temperatures. 40 (12) (1999) 3433-3441.10.1016/S0032-3861(98)00560-6 ↗
49. Comparison of water absorption in natural cellulosic fibres from wood and one-year crops in polypropylene composites and its influence on their mechanical properties10.1016/j.compositesa.2004.04.004 ↗
50. Some consequences of saline solution immersion on mechanical behavior of two marine epoxy-based coatings10.1016/j.porgcoat.2010.05.009 ↗
51. Durability study of pultruded CFRP plates immersed in water and seawater under sustained bending: Water uptake and effects on the mechanical properties10.1016/j.compositesb.2014.10.034 ↗
52. On the Molecular Mechanism of H2O Diffusion into Polyimides: A Vibrational Spectroscopy Investigation10.1021/ma071385+ ↗
53. Studies of Miscibility Behavior and Hydrogen Bonding in Blends of Poly(vinylphenol) and Poly(vinylpyrrolidone)10.1021/ma010517a ↗
54. Unusual hydrogen bonding in water-filled carbon nanotubes10.1021/ja057856u ↗
55. FTIR Study on Hydrogen-Bonding Interactions in Biodegradable Polymer Blends of Poly(3-hydroxybutyrate) and Poly(4-vinylphenol)10.1021/ma100307m ↗