Spatially resolved structural and chemical properties of the white layer in machined Inconel 718 super alloy
Source abstract
Abstract
Inconel 718 is one type of nickel-based alloy used for a large range of applications, including gas turbines and aeroengines components. Although mechanical and thermodynamic properties of this material have been deeply studied in the past years, a method able to investigate local properties of the thin white layer formed on the alloy surface after machining remains challenging. Here, a 90 nm X-ray beam is used to probe the local strain, crystal orientation, and chemical composition of grains in the white layer. Data reveals mosaicity induced by the tool during machining. The high spatial resolution, combined with crystal lattice sensitivity, shows that the average grain size is around 30 nm throughout the white layer, while the strain is anisotropic nearest to the surface. Results provide new insights on the basic properties of the white layer in super alloys, revealing important information about the impact of finish machining which might help to explain fatigue and cracking formation on these materials during their usage phase.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Additive Manufacturing Materials and Processes · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Alloy design and development of INCONEL718 type alloy10.1016/j.msea.2007.11.115 ↗
2. Fracture mechanisms induced by microporosity and precipitates in isothermal fatigue of polycrystalline nickel based superalloy10.1016/j.msea.2018.06.095 ↗
3. Microstructure and Properties of Inconel 718 Superalloy Fabricated by Selective Laser Melting Additive Manufacture Technology10.3390/ma14040991 ↗
4. Quantitative phase analysis of Inconel 718 by X-ray diffraction10.1023/A:1018553703030 ↗
5. Effect of standard heat treatment on the microstructure and mechanical properties of hot isostatically pressed superalloy inconel 71810.1016/S0921-5093(03)00079-0 ↗
6. Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties10.1016/j.matdes.2016.10.075 ↗
7. In situ TEM observation of γ′, γ″ and δ precipitations on Inconel 718 superalloy through HIP treatment10.1016/j.jallcom.2009.07.046 ↗
8. Influence of modified processing on structure and properties of hot isostatically pressed superalloy Inconel 71810.1016/j.msea.2005.11.031 ↗
9. Machining induced surface integrity in titanium and nickel alloys: A review10.1016/j.ijmachtools.2010.11.003 ↗
10. Surface integrity analysis of machined Inconel 718 over multiple length scales10.1016/j.cirp.2012.03.058 ↗
11. A fundamental study on the impact of surface integrity by hard turning on rolling contact fatigue10.1016/j.ijfatigue.2005.12.002 ↗
12. Surface integrity in material removal processes: Recent advances10.1016/j.cirp.2011.05.002 ↗
13. Characterization of White Layer Generated when Turning Aged Inconel 71810.1016/j.proeng.2011.11.080 ↗
14. Influence of Surface Anomalies Following Hole Making Operations on the Fatigue Performance for a Nickel-Based Superalloy10.1115/1.4027619 ↗
15. Nano-scale characterization of white layer in broached Inconel 71810.1016/j.msea.2016.12.045 ↗
16. Microstructure and mechanical properties of surface and subsurface layers in broached and shot-peened Inconel-718 gas turbine disc fir-trees10.1016/j.matchar.2017.08.002 ↗
17. Destructive and non-destructive testing methods for characterization and detection of machining-induced white layer: A review paper10.1016/j.cirpj.2018.10.001 ↗
18. Glancing-incidence focussed ion beam milling: A coherent X-ray diffraction study of 3D nano-scale lattice strains and crystal defects10.1016/j.actamat.2018.05.018 ↗
19. Ptychographic characterization of a coherent nanofocused X-ray beam10.1364/OE.386068 ↗
20. Combining Nanofocused X-Rays with Electrical Measurements at the NanoMAX Beamline10.3390/cryst9080432 ↗
21. NanoMAX: the hard X-ray nanoprobe beamline at the MAX IV Laboratory10.1107/S1600577521008213 ↗
22. In Situ Imaging of Ferroelastic Domain Dynamics in CsPbBr 3 Perovskite Nanowires by Nanofocused Scanning X-ray Diffraction10.1021/acsnano.0c07426 ↗
23. Inducing ferroelastic domains in single-crystal CsPbBr 3 perovskite nanowires using atomic force microscopy10.1103/PhysRevMaterials.5.L063001 ↗
24. On chemical and diffusional interactions between PCBN and superalloy Inconel 718: Imitational experiments10.1016/j.jeurceramsoc.2019.03.002 ↗
25. TEM study on the surface white layer in two turned hardened steels10.1016/S0921-5093(01)01447-2 ↗
26. Tool wear mechanisms of PcBN in machining Inconel 718: Analysis across multiple length scale10.1016/j.cirp.2021.04.008 ↗
27. Investigation of mechanical and thermal loads in pcBN tooling during machining of Inconel 71810.1007/s00170-020-05081-8 ↗
28. Dissolution kinetics of δ phase and its influence on the notch sensitivity of Inconel 71810.1016/j.matchar.2006.04.020 ↗
29. Delta phase precipitation in Inconel 71810.1016/j.matchar.2004.07.004 ↗
30. Enhancing Mechanical Properties of the Spark Plasma Sintered Inconel 718 Alloy by Controlling the Nano-Scale Precipitations10.3390/ma12203336 ↗
31. Non-destructive detection of machining-induced white layers through grain size and crystallographic texture-sensitive methods10.1016/j.matdes.2021.109472 ↗
32. The sensitivity of Ni-based superalloy to hole making operations: Influence of process parameters on subsurface damage and residual stress10.1016/j.jmatprotec.2008.09.014 ↗