Improvement of cavitation erosion resistance of structural metals by alternating magnetic field treatment
Source abstract
Abstract
Results of cavitation erosion tests for EN8 steel, nickel-aluminium bronze (NAB), 70/30 brass and aluminium alloy AA2014-T6 following alternating magnetic field (AMF) treatment are presented. These alloys were selected because of their magnetic nature; EN8 steel is ferromagnetic, NAB and 70/30 brass are diamagnetic and AA2014 alloy is paramagnetic. The indirect cavitation erosion tests (ASTM G32–10 standard) were fulfilled at a frequency of 20 kHz in deionized water which was maintained at room temperature and ambient pressure for a predetermined time. The results show significant decrease in the mass loss for all samples that had underg1 AMF treatment. The eroded samples were characterised by means of scanning electron microscopy, while microhardness measurements showed an increase in the surface hardness as a result of the AFM treatment. The results of X-ray diffraction indicated formation of more compressive residual stresses following treatment, while examination by transmission electron microscopy showed evidence of dislocation movement away from grain boundaries. In the case of the NAB and 20014-T6 alloys, there was evidence of new precipitation. By considering the deformed state and the magnetic nature of each alloy, mechanisms explaining the increase in the cavitation erosion resistance due to the treatment are proposed and discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Electromagnetic Effects on Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Erosion–corrosion resistance of engineering materials in various test conditions10.1016/j.wear.2009.01.052 ↗
2. Influence of ultrasound treatment on cavitation erosion resistance of AlSi7 alloy10.3390/ma10030256 ↗
3. Scaling study of cavitation pitting from cavitating jets and ultrasonic horns10.1016/j.wear.2012.07.025 ↗
4. Cavitation erosion of age-hardenable aluminum alloys10.1007/BF02646379 ↗
5. Mass loss simulation in cavitation erosion: Fatigue criterion approach10.1016/j.wear.2013.01.118 ↗
6. Fatigue failure of SUS 304 caused by vibratory cavitation erosion10.1016/0043-1648(94)90238-0 ↗
7. The interaction mechanism of cavitation erosion and corrosion on HVOF sprayed NiCrWMoCuCBFe coating in artificial seawater10.1016/j.apsusc.2020.146499 ↗
8. Deposition and cavitation erosion behavior of multimodal WC-10Co4Cr coatings sprayed by HVOF10.1016/j.surfcoat.2020.125757 ↗
9. Ultrasonic cavitation erosion of gas nitrided Ti–6Al–4V alloys10.1016/j.ultsonch.2014.01.005 ↗
10. The effect of shot peening on the cavitation erosion of pure iron and austenitic stainless steel in distilled and 1% salt waters10.1016/0043-1648(87)90145-1 ↗
11. Exploration on repairing fatigue damage of steel specimens with magnetic treatment10.1016/S1359-6462(99)00010-X ↗
12. Restoration of fatigue damage in stainless steel by high-density electric current10.1016/j.ijfatigue.2013.08.012 ↗
13. Influence of heat treatment on the fatigue life of a laser-welded NiTi alloy wire10.1016/j.matchar.2006.05.001 ↗
14. Effect of electropulsing on the fatigue resistance of aluminium alloy 2014–T610.1016/j.msea.2019.138679 ↗
15. Effect of Alternating Magnetic Field on the Fatigue Behaviour of EN8 Steel and 2014–T6 Aluminium Alloy10.3390/met9090984 ↗
16. Effect of Electromagnetic Treatment on Fatigue Resistance of 2011 Aluminum Alloy10.1142/S1756973716500049 ↗
17. Effect of pulsed magnetic treatment on the corrosion of titanium10.1080/02670836.2017.1302141 ↗
18. Effect of pulsed magnetic field pre-treatment of AISI 52100 steel on the coefficient of sliding friction and wear in pin-on-disk tests10.1007/s40544-014-0048-0 ↗
19. Influence of magnetic field on wear in high frequency reciprocating sliding contacts10.1016/j.triboint.2011.04.001 ↗
20. Evaluation of effect of magnetostriction on residual stress relief by pulsed magnetic treatment10.1179/026708304X4286 ↗
21. Residual stress reduction by combined treatment of pulsed magnetic field and pulsed current
22. Effect of a pulsed magnetic treatment on the dislocation substructure of a commercial high strength steel10.1016/j.msea.2005.03.003 ↗
23. Effects of Pulsed Magnetic Fields of Different Intensities on Dislocation Density, Residual Stress, and Hardness of Cr4Mo4V Steel10.3390/cryst10020115 ↗
24. Influence of a high pulsed magnetic field on the tensile properties and phase transition of 7055 aluminum alloy
25. Effects of pulsed magnetic field on thrust bearing washer hardness10.1016/j.wear.2006.11.007 ↗
26. Effect of pulsed magnetic treatment on drill wear10.1016/S0924-0136(02)01002-6 ↗
27. The Effects of Magnetic Treatment on the Tribological Behavior of AISI 1045 Steel under Lubricated Conditions10.1080/10402004.2017.1390180 ↗
28. Effects of a Pulsed Magnetic Treatment on the Fatigue of Low Carbon Steel10.1016/S1359-6462(98)00046-3 ↗
29. The influence of magnetic treatment of screw propeller on the cavitation wear
30. Asm.matweb.com, ASM Material Data Sheet.
31. Richardson · 2016 · No. 222
32. Standard · 1992 · 3
33. Chahine, G.L., J.-P. Franc, and A. Karimi, Laboratory Testing Methods of Cavitation Erosion, in Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction, K.-H. Kim, et al., Editors. 2014, Springer Netherlands: Dordrecht. p. 21-35.10.1007/978-94-017-8539-6_2 ↗
34. Cseh, D. and V. Mertinger, X-Ray Diffraction Measurements of Residual Stress Induced by Surface Compressing Methods. Vol. 729. 2012. 199-204.10.4028/www.scientific.net/MSF.729.199 ↗
35. Lewis, G.N. and M. Randall, Thermodynamics and the free energy of chemical substances. New York and London, 1923: McGraw-Hill.
36. The effects of applied magnetic fields on the α/γ phase boundary in the Fe–Si system10.1088/0022-3727/39/14/003 ↗
37. Energy storage during the tensile deformation of armco iron and austenitic steel10.1016/0025-5416(85)90274-5 ↗
38. On the conversion of plastic work into heat during high-strain-rate deformation
39. Rao, D.K., Properties of soft Magnetic Materials. Magnetic Materials Data. Magweb, Version 7 Release Date Aug. 15, 2021.
40. Direct observation of electrotransport of dislocations in a metal
41. The effect of residual stresses on hardness measurements10.1007/BF02322494 ↗
42. Estimation of residual stress by instrumented indentation: A review
43. Improvement in cavitation erosion resistance of AA5083 aluminium alloy by laser shock processing10.1016/j.surfcoat.2019.07.023 ↗
44. Effects of laser shock processing on electrochemical corrosion resistance of ANSI 304 stainless steel weldments after cavitation erosion10.1016/j.corsci.2012.08.034 ↗
45. Improvement in cavitation erosion resistance of a copper-based propeller alloy by laser surface melting10.1016/j.surfcoat.2003.08.048 ↗
46. Laser surface alloying of a marine propeller bronze using aluminium powder: Part I: Microstructural analysis and cavitation erosion study10.1016/j.surfcoat.2004.12.021 ↗
47. Microstructure design to improve the corrosion and cavitation corrosion resistance of a nickel-aluminum bronze10.1016/j.corsci.2018.04.043 ↗
48. Cavitation erosion of NiAl-bronze layers generated by friction surfacing10.1016/j.wear.2011.06.002 ↗
49. Corrosion and cavitation erosion behaviors of friction stir processed Ni-Al bronze: effect of processing parameters and position in the stirred zone10.5006/1070 ↗
50. Electromechanical effect in metals
51. Sprecher, A., S. Mannan, and H. Conrad, Overview no. 49: On the mechanisms for the electroplastic effect in metals. Acta Metallurgica, 1986. 34(7): p. 1145-1162.10.1016/0001-6160(86)90001-5 ↗
52. A study of the electroplastic effect in metals10.1016/0036-9748(78)90026-1 ↗
53. Additional results on the electroplastic effect in metals10.1016/0036-9748(79)90311-9 ↗
54. Electroplasticity in metals and ceramics10.1016/S0921-5093(00)00786-3 ↗
55. Electroplastic behaviour in an aluminium alloy and dislocation density based modelling10.1016/j.matdes.2017.03.072 ↗
56. Effect of directed electron beam on moving dislocations
57. Conrad · 1989 · 499
58. Spytsin · 1985
59. Interaction of conduction electrons with single dislocations in metals
60. Christy · 1965
61. Effect of pulsed magnetic treatment on the corrosion of titanium
62. Physical bases of electric-pulse and electroplastic treatments and new materials
63. Troitskii, O., et al., Application of high‐density current in plastic working of metals. physica status solidi (a), 1979. 52(1): p. 85-93.10.1002/pssa.2210520109 ↗
64. Magnetoplastic effects in solids10.1134/1.1744954 ↗
65. Spin effects in plasticity10.1103/PhysRevLett.78.2779 ↗
66. Possible mechanism of the magnetoplastic effect
67. Theoretical basis for electro-and magnetoplasticity10.1016/S0921-5093(00)00782-6 ↗
68. Jiles, D., Introduction to magnetism and magnetic materials. 2015: CRC press.10.1201/b18948 ↗
69. Effect of milling depth of the junction pattern on magnetic properties and yields in magnetic tunnel junctions10.1143/JJAP.41.L183 ↗
70. Effect of magnetic treatment on fatigue life of AISI 4140 steel10.1016/j.matdes.2004.09.003 ↗
71. Residual stress reduction by pulsed magnetic treatment10.1016/S0924-0136(03)00387-X ↗
72. A micro-mechanism model of residual stress reduction by low frequency alternating magnetic field treatment10.1016/S0924-0136(02)00915-9 ↗
73. Transition from ferromagnetism to mictomagnetism in Fe—Al alloys10.1016/0038-1098(76)91292-8 ↗
74. Marine wear and tribocorrosion10.1016/j.wear.2017.01.076 ↗
75. Binns, C., Introduction to nanoscience and nanotechnology. Vol. 14. 2010: John Wiley & Sons.10.1002/9780470618837 ↗
76. A mechanism of magnetic hysteresis in heterogeneous alloys. Philosophical Transactions of the Royal Society of London
77. Hard magnetic materials10.1080/00018735900101178 ↗
78. Grain boundary characteristics and texture formation in a medium carbon steel during its austenitic decomposition in a high magnetic field10.1016/j.actamat.2005.08.007 ↗
79. Belov, N.A., A.A. Aksenov, and D.G. Eskin, Iron in aluminium alloys: impurity and alloying element. 2002: CRC Press.10.1201/9781482265019 ↗
80. Aluminum Alloys: Structure and Properties, Butterworths