Effect of moisture content on curing kinetics of agglomerate cork
Source abstract
Abstract
Abstract The curing process of Toluene 2,4-DiIsocyanate (TDI) pre-polymer with granulate cork is significantly affected by the cork moisture content since the reaction of isocyanate is highly sensitive to water. Two types of moisture are considered: the moisture contained inside the granulate cork, residual moisture, and the moisture intentionally sprayed over the granules of cork, added moisture. This study analyses the curing kinetics of TDI and granulate cork mixtures containing added moisture using Differential Scanning Calorimetry (DSC), and the reaction rate increase associated with the added moisture content (AMC). The underlying objective of this work is to reduce the time needed to obtain agglomerate cork stoppers through AMC increase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Plant Surface Properties and Treatments · Natural Fiber Reinforced Composites · Postharvest Quality and Shelf Life Management
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Fortes · 2004
2. Pereira · 2007
3. Cork agglomerates as an ideal core material in lightweight structures10.1016/j.matdes.2009.05.039 ↗
4. Modelling impact response of agglomerated cork10.1016/j.matdes.2014.02.011 ↗
5. Effect of density on the compression behaviour of cork10.1016/j.matdes.2013.07.038 ↗
6. Variability of the compression properties of cork10.1007/s00226-014-0651-2 ↗
7. Dynamic crushing behaviour of agglomerated cork10.1016/j.matdes.2014.09.054 ↗
8. Mechanical behavior of multilayered sandwich panels of wood veneer and a core of cork agglomerates10.1016/j.matdes.2014.09.059 ↗
9. Influence of the wetting properties of polymeric adhesives on the mechanical behaviour of cork agglomerates10.1163/156856196X00148 ↗
10. Mechanism of migration from agglomerated cork stoppers: I. Electron spin resonance investigation10.1002/app.10230 ↗
11. Detection of migration of phthalates from agglomerated cork stoppers using HPLC–MS/MS10.1002/jssc.201100871 ↗
12. Effect of surface treatment in cork reinforced composites10.1007/s10965-009-9339-y ↗
13. Mechanism of migration from agglomerated cork stoppers, II. Safety assessment criteria of agglomerated cork stoppers for champagne wine cork producers, for users and for control laboratories10.1080/02652030310001597583 ↗
14. Search for the contamination source of butyltin compounds in wine: agglomerated cork stoppers10.1021/es049787+ ↗
15. UNE 56922: 2004 – Agglomerate cork stoppers for still wines. Test methods and specifications.
16. FDA – Food and Drug Administration, 2012, [accessed 16.10.12]. .
17. Frisch · 1984 · vols. 1–9
18. Wirpsza · 1993
19. Use of isoconversional methods to analyze the cure kinetics of isocyanate-ended quasi-prepolymers with water10.1002/app.24914 ↗
20. Evaluation of the cure kinetics of the wood/pMDI bondline10.1016/S0143-7496(00)00045-2 ↗
21. Prime · 1981
22. Gilham JK. Curing. In: Encyclopedia of polymer science and engineering, 2nd ed. [S.l.:s.n], v. 4; 1986.
23. Effect of moisture content on curing kinetics of pMDI resin and wood mixtures10.1016/j.ijadhadh.2004.12.002 ↗