journal article·2015-12

Preparation and thermal performance analysis of novel multilayer cladding structure composites

Yang Wang, Zhaofeng Chen, Zhaozhan Gu, Huimin Sun, Shengjie Yu, Lili Nie, Ruiying Luo

Materials & Design· Volume 86
Publisher page

Abstract

Abstract With regard to the adiabatic principle of insulation, a novel multilayer cladding structure composites (MCSC) with vacuum inside was put forward, which could be used in high temperature insulation field. In the composites, SiO 2 was used to fill the microcracks and protect the carbon matrix from oxidizing. This novel material was composed of two parts, one was the core material consisted of SiC foam ceramic, the other was the flawless outer shell consisted of carbon fiber reinforced composites with vacuum inside that produced by Chemical Vapor Infiltration (CVI) Pyrolytic Carbon (PyC) and silicasol-infiltration–sintering methods. Material density was 0.81 g/cm 3 . The effective thermal conductivity of MCSC ranged from 0.193 W/m · K to 0.721 W/m · K within the temperature from 303 K to 703 K, which was 13.5–23.3% lower than the value of SiC ceramic foam core materials. However, at 1473 K, the measured data of MCSC and SiC foam were 1.815 W/m · K and 1.911 W/m · K, respectively. It was only 5.02% lower than that of SiC foam.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Space Shuttle Orbiter - Reusable surface insulation subsystem thermal performance
2. Cheremisinoff · 1990 · Vols. 1–3
3. Experimental study of insulating properties and behaviour of thermal barrier coating systems in thermo cyclic conditions10.1016/j.matdes.2014.11.029 ↗
4. New lightweight composite construction materials with low thermal conductivity10.1016/S0958-9465(00)00072-X ↗
5. Gas pressure and temperature dependences of thermal conductivity of porous ceramic materials: part 2, refractories and ceramics with porosity exceeding 30%10.1111/j.1151-2916.1996.tb08598.x ↗
6. Thermal conductivity of porous alumina ceramics prepared using starch as a pore-forming agent10.1016/j.jeurceramsoc.2008.06.018 ↗
7. Design and fabrication of porous ZrO2/(ZrO2+Ni) sandwich ceramics with low thermal conductivity and high strength10.1016/j.matdes.2014.05.006 ↗
8. Studies on high-temperature multilayer thermal insulations10.1016/j.ijheatmasstransfer.2003.08.012 ↗
9. Thermal conductivity of highly porous zirconia10.1016/j.jeurceramsoc.2005.11.011 ↗
10. Application of vacuum insulation panels in the cold chain — analysis of viability10.1016/j.ijrefrig.2014.07.010 ↗
11. The effect of drying condition of glassfibre core material on the thermal conductivity of vacuum insulation panel10.1016/j.matdes.2013.03.021 ↗
12. Hints for an additional aging factor regarding the thermal performance of vacuum insulation panels with pyrogenic silica core10.1016/j.vacuum.2013.07.033 ↗
13. ASTM E422 — 05. Standard test method for measuring heat flux using a water-cooled calorimeter
14. Microstructure and mechanical properties of three-dimensional carbon/silicon carbide composites fabricated by chemical vapor infiltration10.1016/S0008-6223(98)00076-1 ↗
15. Classification and quantification of initial porosity in a CMC laminate10.1016/j.compositesa.2003.09.026 ↗
16. Microstructure and strength of Al2O3 and carbon fiber reinforced 2024 aluminum alloy composites10.1007/s11665-014-1036-2 ↗
17. Mechanical properties and microstructure of 3D orthogonal quartz fiber reinforced silica composites fabricated by silicasol-infiltration-sintering10.1016/j.matdes.2011.11.022 ↗
18. Vacuum insulation panels: study on VIP-components and panels for service life prediction of VIP in building applications
19. Thermal transport in polystyrene and polyurethane foam insulations10.1016/0017-9310(92)90150-Q ↗
20. Heat transfer in open cell foam insulation10.1115/1.2824072 ↗
21. Thermal conductivity of highly porous mullite material10.1016/j.actamat.2005.03.040 ↗
22. Lin · 1995
23. Liu · 2002