Highly aligned and interconnected porous poly( ε -caprolactone) scaffolds derived from co-continuous polymer blends
Source abstract
Abstract
Abstract Constructing oriented porous architecture in the scaffolds offers the basis for mimicking the structure of highly organized tissues. In the current work, we attempted to fabricate three-dimensional (3D), oriented porous poly(e-caprolactone) (PCL) scaffolds by water extracting polyethylene oxide (PEO) from the oriented PCL/PEO co-continuous blends. Solid phase extrusion was imposed to the bulk co-continuous blends so as to align both PCL and PEO phases along the extrusion direction, where coarsening of binary blends was impeded due to control over the extrusion temperature below their melting points. Thus, fully interconnected (connectivity: ~ 100%) aligned pores with uniform size were generated in the PCL porous scaffold after PEO extraction. Intriguingly, in vitro bone marrow stem cell staining results showed that such a porous scaffold with anisotropic structure exhibited very high ability to guide cellular alignment and elongation compared to the regular one with isotropic structure. The enabling strategy provides a versatile, scalable and tissue-friendly route to construct the 3D porous scaffolds with highly interconnected aligned pores, which is promising for the use in tissue repair.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Hierarchical structure and mechanical improvement of an n-HA/GCO-PU composite scaffold for bone regeneration10.1021/acsami.5b07327 ↗
2. Surface modification of 3D-printed porous scaffolds via mussel-inspired polydopamine and effective immobilization of rhBMP-2 to promote osteogenic differentiation for bone tissue engineering10.1016/j.actbio.2016.02.006 ↗
3. Tailored surface treatment of 3D printed porous Ti6Al4V by Microarc oxidation for enhanced osseointegration via optimized bone in-growth patterns and interlocked bone/implant interface10.1021/acsami.6b05893 ↗
4. Bioinspired trimodal macro/micro/nano-porous scaffolds loading rhBMP-2 for complete regeneration of critical size bone defect10.1016/j.actbio.2015.12.006 ↗
5. Neurite outgrowth on nanofiber scaffolds with different orders, structures, and surface properties10.1021/nn900070z ↗
6. The regulation of tendon stem cell differentiation by the alignment of nanofibers10.1016/j.biomaterials.2009.11.083 ↗
7. Biomimetic electrospun nanofibrous structures for tissue engineering10.1016/j.mattod.2013.06.005 ↗
8. Engineering multi-layered skeletal muscle tissue by using 3D microgrooved collagen scaffolds10.1016/j.biomaterials.2015.09.010 ↗
9. The effect of the alignment of electrospun fibrous scaffolds on Schwann cell maturation10.1016/j.biomaterials.2007.10.025 ↗
10. Nanofiber assembly by rotary jet-spinning10.1021/nl101355x ↗
11. Nanofibers from scalable gas jet process10.1021/mz300297g ↗
12. Surface modification of melt extruded poly(ε-caprolactone) nanofibers: toward a new scalable biomaterial scaffold10.1021/mz500112d ↗
13. Micropattern width dependent sarcomere development in human ESC-derived cardiomyocytes10.1016/j.biomaterials.2014.02.001 ↗
14. Biomimetic three-dimensional anisotropic geometries by uniaxial stretch of poly(ε-caprolactone) films for mesenchymal stem cell proliferation, alignment, and myogenic differentiation10.1089/ten.tec.2012.0472 ↗
15. Periosteum-mimetic structures made from freestanding microgrooved nanosheets10.1002/adma.201305804 ↗
16. Synergic effects of nanofiber alignment and electroactivity on myoblast differentiation10.1016/j.biomaterials.2012.05.018 ↗
17. Dual-microstructured porous, anisotropic film for biomimicking of endothelial basement membrane10.1021/acsami.5b02464 ↗
18. Manufacturing and morphology structure of polylactide-type microtubules orientation-Structured scaffolds10.1016/j.biomaterials.2006.05.028 ↗
19. Preparation and cell affinity of microtubular orientation-structured PLGA(70/30) blood vessel scaffold10.1016/j.biomaterials.2008.04.010 ↗
20. Preparation of aligned porous gelatin scaffolds by unidirectional freeze-drying method10.1016/j.actbio.2009.08.041 ↗
21. Nanofiber yarn/hydrogel core-shell scaffolds mimicking native skeletal muscle tissue for guiding 3D myoblast alignment, elongation, and differentiation10.1021/acsnano.5b03644 ↗
22. Preparation of poly(l-lactic acid) honeycomb monolith structure by unidirectional freezing and freeze-drying10.1016/j.ces.2008.04.036 ↗
23. Poly(ε-caprolactone) scaffolds of highly controlled porosity and interconnectivity derived from co-continuous polymer blends: model bead and cell infiltration behavior10.1007/s10856-014-5256-7 ↗
24. Morphology control in co-continuous poly(L-lactide)/polystyrene blends: a route towards highly Structured and interconnected porosity in poly(l-lactide) materials10.1021/bm030034+ ↗
25. An analysis of the mechanics of solid phase extrusion of polymers10.1007/PL00020069 ↗
26. Recent developments in ultraorientation of polyethylene by solid-state extrusion10.1021/cr60326a005 ↗
27. Fabrication and characterization of interconnected porous biodegradable poly(ε-caprolactone) load bearing scaffolds10.1007/s10856-011-4367-7 ↗
28. Preparation of interconnected poly(ε-caprolactone) porous scaffolds by a combination of polymer and salt particulate leaching10.1016/j.polymer.2006.04.029 ↗
29. Toward a tunable fibrous scaffold: structural development during uniaxial drawing of coextruded poly(ε-caprolactone) fibers10.1021/acs.macromol.5b00370 ↗
30. Macroporous poly(l-lactide) of controlled pore size derived from the annealing of co-continuous polystyrene/poly(L-lactide) blends10.1016/j.biomaterials.2003.08.060 ↗
31. Shish-kebab-Structured poly(ε-caprolactone) nanofibers hierarchically decorated with chitosan-poly(ε-caprolactone) copolymers for bone tissue engineering10.1021/acsami.5b00900 ↗
32. Directed 3D cell alignment and elongation in microengineered hydrogels10.1016/j.biomaterials.2010.05.056 ↗
33. Fabrication of a highly ordered hierarchically designed porous nanocomposite via indirect 3D printing: mechanical properties and in vitro cell responses10.1016/j.matdes.2015.08.133 ↗