journal article·2019-03Open access

Microstructure characterization and strengthening behavior of dual precipitation particles in Cu Ti microalloyed dual-phase steels

Cheng-Han Li, Chih-Yuan Chen, Shao-Pu Tsai, Jer-Ren Yang

Materials & Design· Volume 166

Abstract

Copper particles that directly nucleated on the interphase precipitated TiC within the ferrite matrix were found in the CuTi bearing dual-Phase (DP) steel after a multistep heat treatment process. The formation of dual precipitates within ferrite grains should be considered a separated phase transformation process because only titanium carbides form initially when austenite undergoes decomposition reaction; subsequently, copper particles heterogeneously nucleate on these carbides.The above separated precipitation behavior leads to a gentle tempering behavior of CuTi microalloyed DP steel. For example, in Cu microalloyed DP steel, the changes in the average Vickers hardness of ferrite and martensite after 9 h of tempering treatment were 165 to 210 and 407 to 278, respectively. However, in the CuTi microalloyed DP steel, the average Vickers hardness of ferrite and martensite increased from 235 to 249 and 339 to 353, respectively, after 9 h of tempering.Fractography analysis revealed the mixed mode fracture characteristic due to the DP steel consisting of soft ferrite and hard martensite. However, fewer brittle-feature cleavage facets were found in the CuTi microalloyed DP steel after 5 h of tempering treatment, indicating the suppression of damage due to ferrite and martensite interface decohesion. Keywords: DP steel, Hardness, Interphase precipitation, Dual precipitation, Transmission electron microscopy
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. An overview of dual-phase steels: advances in microstructure-oriented processing and micromechanically guided design10.1146/annurev-matsci-070214-021103 ↗
2. Influence of martensite distribution on the mechanical properties of dual phase steels: experiments and simulation
3. Development of a high strength and ductile Nb-bearing dual phase steel by cold-rolling and intercritical annealing of the ferrite-martensite microstructures10.1016/j.msea.2016.02.028 ↗
4. New insights into martensite strength and the damage behavior of dual; phase steel10.1016/j.actamat.2018.08.010 ↗
5. Effects of inter-critical temperatures on martensite morphology, volume fraction and mechanical properties of dual-phase steels obtained from direct and continuous annealing cycles10.1016/j.matdes.2014.04.073 ↗
6. Effects of morphology on the mechanical behavior of a dual phase Fe/2Si/0.1C steel10.1007/BF02648546 ↗
7. Austenite-to-ferrite phase transformation in low-alloyed steels10.1016/j.commatsci.2004.09.031 ↗
8. Isothermal austenite-ferrite transformation of Fe-0.04 at.% C alloy: dilatometric measurement and kinetic analysis10.1016/j.actamat.2008.04.015 ↗
9. Examination of phase transformation kinetics during step quenching of dual phase steels10.1016/j.matchemphys.2016.12.002 ↗
10. Effects of microstructure and notches on the mechanical properties of dual-phase steels10.1016/S1044-5803(99)00044-3 ↗
11. Morphology and distribution of martensite in dual phase (DP980) steel and its relation to the multiscale mechanical behavior10.1016/j.msea.2016.02.048 ↗
12. Tempering of manganese and Mn-Si-V steels10.1007/BF02670446 ↗
13. Cu precipitation kinetics during martensite tempering in a medium C steel10.1016/j.jallcom.2012.11.108 ↗
14. In situ determination of aging precipitation in deformed Fe-Cu and Fe-Cu-B-N alloys by time-resolved small-angle neutron scattering10.1103/PhysRevB.82.174111 ↗
15. Thermodynamic prediction of the equilibrium chemical composition of critical nuclei: bcc cu precipitation in α-Fe10.1016/j.scriptamat.2008.07.008 ↗
16. Multiple precipitation behavior of niobium carbide and copper in martensitic steel10.4028/www.scientific.net/AMR.89-91.395 ↗
17. Precipitation hardening of high-strength low-alloy steels by nanometer-sized carbides10.1016/j.msea.2007.11.110 ↗
18. Dualism of precipitation morphology in high strength low alloy steel10.1016/j.msea.2014.12.029 ↗
19. Precipitation behavior during thin slab thermomechanical processing and isothermal aging of copper-bearing niobium-microalloyed high strength structural steels: the effect on mechanical properties10.1016/j.msea.2011.08.047 ↗
20. Effect of Cr and Al additions on the development of interphase-precipitated carbides strengthened dual-phase Ti-bearing steels10.1016/j.matdes.2017.01.071 ↗
21. Effects of interphase TiC precipitates on tensile properties and dislocation structures in a dual phase steel10.1016/j.matchar.2016.11.023 ↗
22. ASTM E8/E8M-15 · 2015
23. The influence of aluminum on the ferrite formation and microstructural development in hot rolled dual–phase steel10.1016/j.matchar.2011.11.016 ↗
24. Austenite grain size effects on isothermal allotriomorphic ferrite formation in 0.37C–1.45Mn–0.11V microalloyed steel10.2320/matertrans.44.1087 ↗
25. Acicular ferrite formation in a medium carbon steel with a two stage continuous cooling10.1016/S1359-6462(99)00149-9 ↗
26. Effects of auto-tempering behaviour of martensite on mechanical properties of ultra high strength steel sheets10.1016/j.jallcom.2012.04.108 ↗
27. Coarsening behavior of lath and its effect on creep rates in tempered martensitic 9Cr–W steels10.1016/j.msea.2004.01.057 ↗
28. Precipitation behavior of the lower bainitic carbide in a medium-carbon steel containing Si, Mn and Mo10.1016/j.msea.2005.12.047 ↗
29. Maraging steels: making steel strong and cheap10.1038/nmat4949 ↗
30. Ultrahigh-strength steels strengthened by nanoparticles10.1016/j.scib.2017.07.012 ↗
31. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗
32. Control of precipitation morphology in the novel HSLA steel10.1016/j.msea.2015.03.027 ↗
33. Effect of composition and isothermal holding temperature on the precipitation hardening in vanadium-microalloyed steels10.1016/j.matchar.2017.08.003 ↗
34. A dispersion strengthening model based on differing elastic moduli applied to the iron-copper system10.1016/0001-6160(72)90091-0 ↗
35. Modeling Cu precipitation in tempered martensitic steels10.1016/j.msea.2006.02.003 ↗
36. Cu precipitation kinetics during martensite tempering in a medium C steel10.1016/j.jallcom.2012.11.108 ↗
37. The precipitation of copper in abnormal ferrite and pearlite in hyper-eutectoid steels10.1016/S1359-6454(00)00176-2 ↗
38. A microscopic investigation of the precipitation phenomena observed during the pearlite reaction in vanadium alloyed carbon steels10.1016/0956-7151(95)90157-4 ↗
39. Atomic structure of the Cu precipitates in two stages hardening in maraging steel10.1016/j.matlet.2004.09.058 ↗
40. High-resolution electron microscopy studies of the structure of Cu precipitates in α-Fe10.1080/01418619408242533 ↗
41. The bcc-to-9R martensitic transformation of Cu precipitates and the relaxation process of elastic strains in an Fe-Cu alloy10.1080/01418610008212077 ↗
42. Effects of α/γ orientation relationship on VC interphase precipitation in low-carbon steels10.1016/j.scriptamat.2013.03.020 ↗
43. Overview of the current issues in austenite to ferrite transformation and the role of migrating interfaces therein for low alloyed steels10.1016/j.mser.2015.03.001 ↗
44. Influence of martensite volume fraction and hardness on the plastic behavior of dual-phase steels: experiments and micromechanical modeling10.1016/j.ijplas.2015.09.006 ↗
45. Fatigue properties of transformation-induced plasticity and dual-phase steels for auto-body lightweight: experiment, modeling and application10.1016/j.matdes.2009.12.034 ↗
46. A novel and simple technique for development of dual phase steels with excellent ductility10.1016/j.msea.2016.10.098 ↗
47. Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging10.1016/j.actamat.2010.10.002 ↗
48. Tensile behavior of ferrite-martensite dual phase steels with Nano-precipitation of vanadium carbides10.2355/isijinternational.ISIJINT-2015-106 ↗
49. Influence of martensite content and morphology on tensile and impact properties of high martensite dual phase steels10.1007/s11661-999-0269-4 ↗
50. Chapter 15 fractography with the SEM (failure analysis)
51. Micromechanisms of deformation in dual phase steels at high strain rates10.1016/j.msea.2016.10.101 ↗
52. A novel route for development of ultrahigh strength dual phase steels10.1016/j.msea.2014.09.058 ↗
53. Effects of quenching-partitioning-tempering treatment on microstructure and mechanical performance of Nb-V-Ti microalloyed ultra-high strength steel10.1016/j.msea.2017.03.020 ↗
54. Solubility products for titanium-, vanadium-, and niobium-carbide in ferrite10.1016/S0956-716X(99)80002-8 ↗
55. Copper precipitation and its impact on mechanical properties in a low carbon microalloyed steel processed by a three-step heat treatment10.1016/j.matdes.2014.05.059 ↗
56. Direct observation of Cu interphase precipitation in continuous cooling transformation by atom probe tomography10.1080/14786435.2013.853137 ↗
57. Role of rolling temperature in the precipitation hardening characteristics of Ti–Mo microalloyed hot-rolled high strength steel10.1016/j.msea.2014.07.077 ↗
58. Effect of transformation texture on the impact toughness of hot-rolled Ti + Nb microalloyed steel10.1016/j.matdes.2017.04.099 ↗