Experimental characterization of Mode I fatigue delamination growth onset in composite joints: A comparative study
Source abstract
Abstract
This work focuses on Mode I fatigue induced delamination growth onset characterization of co-cured (CC), co-bonded (CB) and secondary bonded (SB) composite joints with an epoxy interleaf. The CC joints used in this work comprise only fibers and resin, while, CB and SB joints contain an adhesive film. Experimental tests were carried out at room temperature using double cantilever beam (DCB) specimens. The delamination behavior was evaluated in terms of the strain energy release rate (SERR) considering a no-growth criterion based on 106 cycles without crack propagation. For Mode I cyclic loading, the threshold values of the CB and SB joints were about 2.5 times higher than the one achieved by the CC joints, presenting a better performance in terms of fatigue delamination growth-onset. A fractographic study was conducted using scanning electron microscopy in order to relate the SERR results with the joint′s failure mechanisms. It was observed that there is a good mechanical compatibility between the substrate and adhesive in the CB and SB joints studied herein. The results found in this paper indicated that the Mode I SERR threshold values were not significantly affected by the interleaf.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Composite adhesive joints under cyclic loading10.1016/S0261-3069(99)00032-1 ↗
2. Mode I fracture of epoxy bonded composite joints 2. Fatigue loading10.1016/S0143-7496(01)00050-1 ↗
3. Predicting the residual strength for environmentally degraded adhesive lap joints10.1016/j.ijadhadh.2005.04.003 ↗
4. Failure mode and strength of uni-directional composite single lap bonded joints with different bonding methods10.1016/j.compstruct.2005.01.023 ↗
5. Fatigue/fracture characterization of composite bonded joints under mode I, mode II and mixed-mode I+II10.1016/j.compstruct.2015.11.073 ↗
6. An updated review of adhesively bonded joints in composite materials10.1016/j.ijadhadh.2016.10.010 ↗
7. Effect of manufacturing methods on the shear strength of composite single-lap bonded joints10.1016/j.compstruct.2009.08.041 ↗
8. Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: adhesives, adhesion theories and surface pretreatment10.1023/B:JMSC.0000007726.58758.e4 ↗
9. Fatigue in adhesively bonded joints: a review10.5402/2012/746308 ↗
10. Adhesive bonding of fibre reinforced polymer composite materials10.1108/01445150010321797 ↗
11. Static and fatigue failures of adhesively bonded laminate joints in moist environments10.1177/1056789510395363 ↗
12. Mode II fatigue delamination growth characterization of a carbon/epoxy laminate at high frequency under vibration loading10.1016/j.engfracmech.2015.08.030 ↗
13. Fractography and failure mechanisms in static mode I and mode II delamination testing of unidirectional carbon reinforced composites10.1016/j.polymertesting.2009.05.003 ↗
14. Fracture and fatigue study of unidirectional glass/epoxy laminate under different mode of loading10.1111/j.1460-2695.2010.01440.x ↗
15. Characterising mode I/mode II fatigue delamination growth in unidirectional fibre reinforced polymer laminates10.1016/j.matdes.2014.10.038 ↗
16. Standard test method for mode I fatigue delamination growth onset of unidirectional fibre-reinforced polymer matrix composites
17. Modes I and II interlaminar fracture toughness and fatigue delamination of CF/epoxy laminates with self-same epoxy interleaf10.1016/j.ijfatigue.2006.02.004 ↗
18. Effect of environment on the fatigue of bonded composite joints. Part 2: fatigue threshold prediction10.1016/S1359-835X(00)00132-9 ↗
19. A total fatigue life model for mode i delaminated composite laminates10.1016/j.ijfatigue.2005.04.006 ↗
20. Characterization of Mode I and Mode II Delamination Growth and Thresholds in AS4/PEEK Composites
21. Interlaminar crack initiation and growth rate in a carbon-fibre epoxy composite under mode-I fatigue loading10.1016/j.compscitech.2007.09.012 ↗
22. Influence of the matrix constituent on mode I and mode II delamination toughness in fiber-reinforced polymer composites under cyclic fatigue10.1016/j.mechmat.2010.10.001 ↗
23. Mode I interlaminar fracture toughness analysis of Co-bonded and secondary bonded carbon fiber reinforced composites joints
24. Standard test method for Mode I interlaminar fracture toughness of unidirectional fiber-reinforced polymer matrix composites
25. Anderson · 2005
26. Towards a Damage Tolerance Philosophy for Composite Materials and Structures
27. Mode I fracture toughness of co-cured and secondary bonded composite joints10.1016/j.ijadhadh.2014.02.008 ↗
28. Effects of temperature on delamination growth in a carbon/epoxy composite under fatigue loading10.1016/S0142-1123(01)00071-8 ↗
29. Greenhalgh · 2009
30. Influence of fibre reinforcement and peel ply surface treatment towards adhesion of composite surfaces10.1016/j.ijadhadh.2004.11.006 ↗
31. The peel ply surface treatment for adhesive bonding of composites: a review10.1016/j.ijadhadh.2013.01.014 ↗
32. Pizzi · 1994
33. Influence of low temperatures on the phenomenon of delamination of mode I fracture in carbon-fibre/epoxy composites under fatigue loading10.1016/j.compstruct.2014.02.007 ↗