journal article·2018-04Open access

Development of a gall-resistant stainless-steel hardfacing alloy

Ryan Smith, Marc Doran, David Gandy, Suresh Babu, Leonardo Wu, Antonio J. Ramirez, Peter M. Anderson

Materials & Design· Volume 143

Abstract

Abstract This work details the development of a new cobalt-free stainless steel powder metallurgy hardfacing alloy designed to replace Stellite 6, a cobalt-based hardfacing alloy used in nuclear valve applications. The fundamental strategy centers on alloying stainless steels with up to 0.5 wt% nitrogen, which is shown to increase both the volume fraction of hard phase precipitates and the strain-hardening rate of the matrix. The resultant alloy, Nitromaxx, exhibits galling performance that is comparable to Stellite 6, up to 350 °C. This performance is attributed to the suppression of strain localization events associated with galling. In particular, transmission electron microscopy and diffraction measurements from tensile tests show that the nitrogen addition decreases the calculated matrix stacking fault energy and enhances both deformation-induced martensite transformation at room temperature and deformation twinning at elevated temperature. These strain-hardening mechanisms, coupled with the increase in precipitate volume fraction, effectively suppress localization and enhance galling resistance up to 350 °C. The enhanced galling resistance cannot be rationalized in terms of tensile stress-strain response alone.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · High Entropy Alloys Studies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Bayer · 1994
2. Bhushan · 200010.1201/9780849377877 ↗
3. Nitrogen containing austenitic stainless steels10.1002/mawe.200600068 ↗
4. Temperature dependence of tensile behaviors of nitrogen-alloyed austenitic stainless steels10.1007/s11665-010-9603-7 ↗
5. The effect of chemical composition and heat treatment conditions on stacking fault energy for Fe-Cr-Ni austenitic stainless steel10.1007/s11661-013-1943-0 ↗
6. Revisiting stacking fault energy of steels10.1007/s11661-015-3266-9 ↗
7. Creep-fatigue interaction behavior of 316LN austenitic stainless steel with varying nitrogen content10.1016/j.matdes.2015.09.007 ↗
8. Kinetics of strain-induced martensite nucleation10.1007/BF02672301 ↗
9. A constitutive model for analyzing martensite formation in austenitic steels deforming at high strain rates10.1016/j.ijplas.2011.08.003 ↗
10. A microstructural investigation on deformation mechanisms of Fe–18Cr–12Mn–0.05C metastable austenitic steels containing different amounts of nitrogen10.1016/j.matdes.2015.05.075 ↗
11. In situ observation of strain and phase transformation in plastically deformed 301 austenitic stainless steel10.1016/j.matdes.2016.09.057 ↗
12. Strength, damage and fracture behaviors of high-nitrogen austenitic stainless steel processed by high-pressure torsion10.1016/j.scriptamat.2014.09.016 ↗
13. A study on high temperature gas nitriding and tempering heat treatment in 17Cr–1Ni–0.5C10.1016/j.matdes.2008.07.023 ↗
14. A galling-resistant substitute for silicon nickel10.1016/S0043-1648(03)00047-4 ↗
15. Deformation behavior of additively manufactured GP1 stainless steel10.1016/j.msea.2017.04.081 ↗
16. Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing10.1016/j.actamat.2016.03.019 ↗
17. Bhushan · 201310.1002/9781118403259 ↗
18. Chattopadhyay · 2001
19. Dieter · 2013
20. Lippold · 2005
21. Rabinowicz · 2013
22. Wear evaluation of high interstitial stainless steels10.1080/10402000802071285 ↗
23. Marshall · 1984
24. Anderson · 2017
25. Twinning and strain-induced f.c.c. - h.c.p. transformation on the mechanical properties of CoNiCrMo alloys10.1016/0025-5416(76)90234-2 ↗
26. Effect of stacking fault energy on work hardening behaviors in Fe-Mn-Si-C high manganese steels by varying silicon and carbon contents10.1016/j.matdes.2015.07.072 ↗
27. Strain hardening and transformation mechanism of deformation-induced martensite transformation in metastable austenitic stainless steels10.1016/0921-5093(91)90769-J ↗
28. Christian · 2002
29. Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels10.1016/j.actamat.2007.07.015 ↗
30. The unlubricated adhesive wear resistance of metastable austenitic stainless steels containing silicon10.1016/0043-1648(77)90060-6 ↗
31. The compressive response of idealized cermet-like materials10.1115/1.4029782 ↗
32. Dodd · 2012
33. Deformation twinning in high-nitrogen austenitic stainless steel10.1016/j.actamat.2007.02.023 ↗
34. Nitrogen in chromium-manganese stainless steels: a review on the evaluation of stacking fault energy by computational thermodynamics10.1088/1468-6996/14/3/033001 ↗
35. Effect of nitrogen on stacking fault energy of f.c.c. iron-based alloys10.1016/S1359-6454(98)00419-4 ↗
36. Design of a new Ni-free austenitic stainless steel with unique ultrahigh strength-high ductility synergy10.1016/j.matdes.2015.05.075 ↗
37. Thermodynamic modeling of the stacking fault energy of austenitic steels10.1016/j.actamat.2010.10.037 ↗
38. Temperature dependence of stacking fault energy in close-packed metals and alloys10.1016/0025-5416(78)90194-5 ↗
39. The role of stacking fault energy on galling and wear behavior10.1016/0043-1648(82)90151-X ↗
40. Effect of alloying and heat treatment on the structure and tribological properties of nitrogen-bearing stainless austenitic steels under abrasive and adhesive wear10.1007/s11041-007-0039-0 ↗
41. The temperature dependence of the wear resistance of iron-base NOREM 02 hardfacing alloy10.1016/S0043-1648(99)00326-9 ↗
42. In situ X-ray diffraction analysis of strain-induced transformations in Fe- and Co-base hardfacing alloys10.1016/j.scriptamat.2014.11.003 ↗
43. Talonen · 2007 · 127
44. Thermo-Calc & DICTRA, computational tools for materials10.1016/S0364-5916(02)00037-8 ↗
45. Nitrogen in iron and steel10.2355/isijinternational.36.738 ↗
46. Relation between lattice expansion and nitrogen content in expanded phase in austenitic stainless steel and CoCr alloys10.1016/j.surfcoat.2010.12.046 ↗
47. Gavriljuk · 1999
48. Modeling kinetics of strain-induced martensite transformation during plastic deformation of austenitic stainless steel10.1016/j.matdes.2016.07.106 ↗
49. Twin-induced grain boundary engineering for 316 austenitic stainless steel10.1016/j.actamat.2006.06.030 ↗
50. Stacking fault energy in silicon10.1063/1.1728570 ↗
51. Stacking fault energies of seven commercial austenitic stainless steels10.1007/BF02641927 ↗
52. The influence of manganese content on the stacking fault and austenitic/e-martensite interfacial energies in Fe-Mn-(Al-Si) steels investigated by experiment and theory10.1016/j.actamat.2014.01.001 ↗