Self-assembling WC interfacial layer on diamond grains via gas-phase transport mechanism during sintering of metal matrix composite
Source abstract
Abstract
Abstract Diamond wire saws are widely used in machining of high strength reinforced concrete and steel structures. In such operation conditions, the tools wear down rather quickly, which has significant technical and economic implications. Currently, there are three main ways to improve a quality of diamond cutting tools: increasing (1) strength of a binder (metal matrix), (2) diamond grain grade and (3) adhesion strength between diamond and a binder. In this work, an effective approach involving simultaneous improvement of (1) and (3) during diamond composite material sintering is reported. The mechanism of spontaneous formation of WC layer on a diamond surface during sintering with metal matrix composite in the presence of WC nanopowder as a reinforcing additive is studied. The layer is formed via gas-phase transport mechanism leading to chemisorption of volatile tungsten oxide WO3 onto a diamond surface followed by WO3 reduction and carbide formation. The simultaneous enhancement of mechanical properties of the binder and formation of protective WC interfacial layer on diamonds provide a synergistic effect, which results in increased productivity and cutting speed of diamond tools.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Diamond tools for wire sawing metal components10.1016/S0925-9635(01)00727-0 ↗
2. MMC based materials as an alternative cutting material for cutting densely filled and heavily reinforced concrete structures
3. Wire cutting tool concepts for steel machining
4. Konstanty · 2005
5. Anosov · 1986
6. An analysis of the catalysis of Fe, Ni or Co on the wear of diamonds10.1016/j.triboint.2004.07.004 ↗
7. Carbon reactivity of binder metals in diamond–metal composites–characterization by scanning electron microscopy and X-ray diffraction10.1016/j.diamond.2013.07.002 ↗
8. Study of the diamond-matrix interface in hot-pressed cobalt-based tools10.1016/0921-5093(90)90066-C ↗
9. Influence of WC-Co substrate pretreatment on diamond film deposition by laser-assisted combustion synthesis10.1021/am101271b ↗
10. Towards a better understanding of nickel/diamond interactions: the interface formation at low temperatures10.1039/C5RA07840G ↗
11. Chemical vapor deposition of highly adherent diamond coatings onto co-cemented tungsten carbides irradiated by high power diode laser10.1021/am2012992 ↗
12. Chemical deposition of nanostructured tungsten and tungsten-alloy coatings from gas phase10.1134/S0033173208040024 ↗
13. Selection of a coating material for diamond grits and optimization of its thickness
14. Interlayers for diamond deposition on tool materials10.1016/0925-9635(95)00352-5 ↗
15. Study hot pressed Fe-diamond composites graphitization10.1016/j.ijrmhm.2012.03.015 ↗
16. Ultrathin W−Al dual interlayer approach to depositing smooth and adherent nanocrystalline diamond films on stainless steel10.1021/am9007159 ↗
17. The effects of Ti carbonization on the nucleation and oriented growth of diamond films on cemented carbide10.1021/am404617m ↗
18. Direct coating adherent diamond films on Fe-based alloy substrate: the roles of Al, Cr in enhancing interfacial adhesion and promoting diamond growth10.1021/am401709j ↗
19. Characterization of sputter deposited niobium and boron interlayer in the copper–diamond system10.1016/j.surfcoat.2012.07.068 ↗
20. Improved interfacial adhesion between diamond film and copper substrate using a Cu(Cr)–diamond composite interlayer10.1016/j.matlet.2012.05.015 ↗
21. Preparation of flat adherent diamond films on thin copper substrates using a nickel interlayer10.1016/S0257-8972(02)00038-5 ↗
22. Effects of Cu and Cu/Ti interlayer on adhesion of diamond film10.1016/j.surfcoat.2007.05.014 ↗
23. Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites10.1016/j.msea.2006.10.184 ↗
24. Carbon nanotube reinforced metal binder for diamond cutting tools10.1016/j.matdes.2015.06.056 ↗
25. Diamond and CBN hybrid and nanomodified cutting tools with enhanced performances: development, testing and modeling10.1016/j.matdes.2015.08.126 ↗
26. Improved mechanical and tribological properties of metal-matrix composites dispersion-strengthened by nanoparticles10.3390/ma3010097 ↗
27. Diamond tools in metal bonds dispersion-strengthened with nanosized particles for cutting highly reinforced concrete10.3103/S1063457610060080 ↗
28. Development and application of the Cu-Ni-Fe-Sn-based dispersion-hardened bond for cutting tools of superhard materials10.3103/S1063457612040090 ↗
29. Interaction of diamond grains with nanosized alloying agents in metal-matrix composites as studied by Raman spectroscopy10.1016/j.diamond.2013.05.007 ↗
30. Interfacial characterization of Cu/diamond composites prepared by powder metallurgy for heat sink applications10.1016/j.scriptamat.2007.10.011 ↗
31. Advanced composite materials for heat sink applications
32. The solid phase bonding of copper, nickel and some of their alloys to diamonds10.1007/BF02396642 ↗
33. Graphitization as a precursor to wear of diamond in machining pure iron: a molecular dynamics investigation10.1016/j.commatsci.2008.10.007 ↗
34. Bale
35. Iron-catalyzed gasification of char in CO210.1021/ef00011a005 ↗
36. Panov · 2004
37. Carbon self-diffusion in tungsten carbide10.1007/BF00549949 ↗