journal article·2026-10

Effect of Fe substitution for Ni on the structure of macroporous Ni–Fe–Al alloys produced by combustion synthesis

Nikita S. Pichugin, Ramil M. Gabbasov, Vladimir D. Kitler, Anatloy S. Maznoy

Publisher page

Abstract

Porous Ni-Al intermetallic alloys are widely used in high-temperature applications that require resistance to oxidation, thermal shock, and steep temperature gradients. Combustion synthesis is an energy-efficient method for producing these materials, allowing for simultaneous synthesis and the formation of a porous structure in a single processing step without the need for complex equipment. However, the high cost of nickel limits the cost-effectiveness of Ni-Al-based materials. Moreover, not all high-temperature applications require the entire porous material to exhibit the exceptional oxidation resistance and thermal stability characteristic of Ni-Al alloys. Thus, partial substitution of Ni with Fe represents a promising approach to tailor material composition and reduce production costs while maintaining the advantages of intermetallic porous structures. This study investigates the effect of substituting Ni with Fe on the fabrication of macroporous Ni-Fe-Al alloys at a fixed aluminum content. Stable self-propagating combustion and the formation of a uniform porous structure were achieved with Ni-to-Fe substitution levels of up to 80 %. The size of the porous scaffold struts varied from 0.26 to 1.8 mm, depending on the Fe concentration and the initial temperature of the reaction mixture. These findings demonstrate the feasibility of direct combustion synthesis of macroporous Ni-Fe-Al alloys with controlled structures and provide a pathway for developing cost-effective porous materials for high-temperature energy applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors · Cellular and Composite Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Fully explicit formulae for flame speed in infinite and finite porous media10.1080/13647830.2021.1939422 ↗
2. Stabilization hydrogen–air flame in two-section metallic porous burner near lean limit10.1016/j.ijhydene.2025.04.502 ↗
3. Combustion synthesis of tailored intermetallic porous burners: Effects of two-section and graded morphologies on lean hydrogen flame stability10.1080/00102202.2025.2495722 ↗
4. Fuel interchangeability for lean premixed combustion in cylindrical radiant burner operated in the internal combustion mode10.1016/j.applthermaleng.2020.115997 ↗
5. A review on the properties of iron aluminide intermetallics10.3390/cryst6010010 ↗
6. Comparative study on NiAl and FeAl intermetallic-bonded diamond tools and grinding performance for Si3N4 ceramic10.1016/j.ceramint.2021.08.170 ↗
7. Nickel Aluminide intermetallic composites fabricated by various processing routes – A review10.1080/02670836.2022.2062648 ↗
8. Critical review on porous material manufacturing techniques, properties & their applications
9. Mechanical characterization and properties of laser-based powder bed–fused lattice structures: A review10.1007/s00170-021-06631-4 ↗
10. Processing and properties of macroporous silicon carbide ceramics: A review10.1016/j.jascer.2013.07.003 ↗
11. Research on self-propagating high-temperature synthesis of ceramic matrix composites, engineering and applied sciences, Science Publishing Group
12. Combustion synthesis of MAX phases: Microstructure and properties inherited from the processing pathway10.3390/cryst13071143 ↗
13. Self-propagating high-temperature synthesis of high-entropy ceramic composition (Hf0.25Ti0.25Cr0.25(FeV)0.25)N
14. Combustion synthesis of porous single-phase β-SiAlON (z=3)10.1007/s11182-025-03383-6 ↗
15. Progress of porous Al-containing intermetallics fabricated by combustion synthesis reactions: A review10.1007/s10853-021-06035-5 ↗
16. Self-propagating high-temperature synthesis of high-entropy materials: A review
17. Combustion synthesis of advanced materials: Principles and applications
18. The use of self-propagating combustion reactions for the preparation and consolidation of metallic and ceramic powders10.4028/www.scientific.net/SSP.25-26.197 ↗
19. The role of self-fluidization in combustion synthesis of porous and granular Ni-Al intermetallics10.1016/j.combustflame.2023.112783 ↗
20. Self-propagating high-temperature synthesis of AlxCoCrFeNiMoy high-entropy alloys: Thermochemical modelling, microstructural evaluation and high temperature oxidation behaviour10.1016/j.matchemphys.2024.129304 ↗
21. The role of Cr in the reactive synthesis of porous FeAlCr intermetallic compounds10.1016/j.matchemphys.2020.123013 ↗
22. Thermal explosion in Ni-Al system: Influence of reaction medium microstructure10.1016/S0010-2180(02)00402-9 ↗
23. A study of self-propagating high-temperature synthesis of NiAl in thermal explosion mode10.1016/S1359-6454(01)00387-1 ↗
24. Self-propagating high-temperature synthesis of macroporous B2+L12 Ni-Al intermetallics used in cylindrical radiant burners10.1016/j.jallcom.2019.04.023 ↗
25. Oxidation-affected erosion of porous Ni-Al intermetallic alloy in combustion applications: pore-scale simulation10.3390/met13020277 ↗
26. Predicting oxidation-limited lifetime of Ni-Al-Cr porous radiant burners made by combustion synthesis10.1016/j.jallcom.2022.167885 ↗
27. Improving high-temperature oxidation resistance of porous Ni-Al intermetallics obtained by self-propagating high-temperature synthesis through microalloying with Dy and Y10.1016/j.jallcom.2024.178057 ↗
28. Exchange · 2025
29. Fabrication and characterization of highly porous feal-based intermetallics by thermal explosion reaction10.1002/adem.201801110 ↗
30. Kinetics study on the SHS reaction in massive samples with high heating rate in the Fe–Al system10.1016/j.jallcom.2014.11.163 ↗
31. On the formation of intermetallics in Fe–Al system – An in situ XRD study10.1016/j.intermet.2012.08.020 ↗
32. Effects of aluminum content and particle size on volume expansion during the sintering of Fe-Al mixed powders10.1016/j.jallcom.2018.02.299 ↗
33. The influence of different additives on the kinetics of self-propagating high-temperature synthesis during the sintering process of Fe and Al elemental powders10.1016/j.intermet.2010.02.018 ↗
34. Experimental formation enthalpies for intermetallic phases and other inorganic compounds10.1038/sdata.2017.162 ↗
35. Gasless combustion of mixtures of metal powders I. Mechanism and details10.1007/BF00751087 ↗
36. Fabrication of Fe-Al intermetallic foams via organic compounds assisted sintering10.3390/ma8052217 ↗
37. Amino acids aided sintering for the formation of highly porous FeAl intermetallic alloys10.3390/ma10070746 ↗
38. Fabrication of feal intermetallic foams by tartaric acid-assisted self-propagating high-temperature synthesis10.3390/ma11040621 ↗
39. Fabrication of a porous Fe–Al intermetallic alloy with ultrahigh open porosity10.1002/adem.202201835 ↗
40. Microalloying effects on the microstructure and kinetics of nanoscale precipitation in Ni–Al–Fe alloy10.1016/j.intermet.2012.01.002 ↗
41. Magnetism-induced ductility in NiAl intermetallic alloys with Fe additions: Theory and experiment10.1016/j.jallcom.2011.12.101 ↗
42. Screening of NiAl-base Ni-Fe-Al Alloys for structural high temperature applications and development of a new Ni-30Fe-10Al-Cr alloy10.1515/ijmr-1999-900911 ↗
43. Effect of Cu on oxidation behaviour of FCC Fe-Ni-Cr-Al and Ni-Cr-Al based alloys10.1016/j.corsci.2019.108273 ↗
44. Effects of Cr on NiAl (β′) Precipitation in ferritic Fe-Ni-Al alloys10.1007/s11661-021-06338-x ↗
45. Microstructure and mechanical properties of the (Fe,Ni)Al-based alloy produced by SLM and HIP of spherical composite powder10.1016/j.msea.2018.11.104 ↗
46. Plasma powder transferred arc additive manufacturing of ((Fe, Ni)-Al) intermetallic alloy and resulting properties10.1007/s40194-023-01631-2 ↗
47. The effect of separating layer between reacting media and molding template on the porous structure of combustion synthesized Ni-Al intermetallics10.1016/j.matlet.2022.131854 ↗
48. Dissolution–precipitation mechanism of self-propagating high-temperature synthesis of mononickel aluminide10.1016/S0966-9795(01)00046-2 ↗
49. The mechanism of self-propagating high-temperature synthesis of nickel aluminides, Part I: Formation of the product microstructure in a combustion wave
50. Mechanisms of reaction wave propagation during combustion synthesis of advanced materials10.1016/S0009-2509(98)00457-6 ↗
51. Diffusion of iron, nickel and cobalt in aluminum10.1016/0001-6160(62)90100-1 ↗
52. Diffusion in metals and intermetallics: An overview10.62721/diffusion-fundamentals.34.1147 ↗
53. Assessment of the Fe–Ni–Al system10.1016/j.intermet.2005.11.021 ↗
54. Review: Reaction synthesis processing of Ni-Al intermetallic materials10.1016/S0921-5093(00)01407-6 ↗
55. Effects of preheating by direct electric current on the self-propagating high-temperature synthesis of Ni3Al-CNT intermetallic nanocomposites10.1007/s11661-022-06708-z ↗