journal article·2026-10

The influence of illuminance on the electrochemical preparation of cerium-containing silicon acrylate coatings

Yang Zhang, Yumeng Yang, Haoyu Han, Liyang Chen, Benfeng Zhu, Li Jiang, Chen Xu, Guoying Wei

Publisher page

Abstract

Introducing light during the electrochemical preparation of coatings can affect their deposition rate and morphology. In this study, a xenon lamp-assisted electrodeposition method was employed to fabricate a uniform cerium-containing silicone-acrylic coating on Q235 steel. The performance of the coating was studied under five different light intensities (ranging from 100 to 190,000 lux).The results showed that as the light intensity increased, the deposition rate accelerated; however, increased internal stress also led to more surface cracks. At 130,000 lux, the coating exhibited the most uniform and dense surface morphology, along with the optimal roughness. Composition analysis revealed a significant increase in cerium content, especially in the proportion of its trivalent state (Ce3+). In performance tests, the water contact angle of the coating prepared under 130,000 lux increased to about 110 degrees (from 99 degrees under baseline conditions), indicating significantly enhanced hydrophobicity. The ultraviolet absorption rate increased with the increasing light intensity. Electrochemical data (including Tafel curves and Nyquist plots) indicated that this coating possessed the lowest corrosion current density and the most positive corrosion potential, suggesting the best anti-corrosion performance. After a 90-day natural exposure test, the coating prepared at 130,000 lux remained intact and rust-free, demonstrating its long-term stability and effective protective capability. This study confirms that an optimal light intensity of 130,000 lux can significantly improve the coating’s uniformity, compactness, and corrosion resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Electrodeposition and Electroless Coatings · Surface Modification and Superhydrophobicity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Synthesis and characterization of anticorrosion zirconia/acrylic nanocomposite resin coatings for steel
2. Preparation and properties of PEDOT-PSS/waterborne acrylic resin coating10.3390/coatings15010014 ↗
3. Nano-SiO2-modified waterborne acrylic acid resin coating for wood wallboard10.3390/coatings12101453 ↗
4. Preparation and UV aging of nano-SiO2/fluorinated polyacrylate polyurethane hydrophobic composite coating
5. On the addition of multifunctional methacrylate monomers to an acrylic-based infusible resin for the weldability of acrylic-based glass fibre composites10.3390/polym15051250 ↗
6. Tailoring the holocellulose fiber/acrylic resin composite interface with hydrophobic carboxymethyl cellulose to enhance optical and mechanical properties10.1021/acs.biomac.4c00295 ↗
7. Preparation and properties of vinyltriethoxysilane-modified waterborne acrylate resins10.1016/j.polymer.2024.127781 ↗
8. Effective corrosion protection by eco-friendly self-healing PMMA-cerium oxide coatings10.1016/j.cej.2019.123219 ↗
9. Influence of ethanol content in the precursor solution on photo-assisted anodic deposition of ceria films10.1149/2.0321504jes ↗
10. Electro-chemo-mechanical effect in Gd-doped ceria thin films with a controlled orientation10.1039/D0TA05500J ↗
11. Defect engineering for tuning the photoresponse of ceria-based solid oxide photoelectrochemical cells10.1021/acsami.0c17921 ↗
12. The difficult search for organocerium (IV) compounds10.1039/C7CS00147A ↗
13. Preparation and properties of waterborne acrylic-modified epoxy phosphate resin and its coating10.3390/coatings14091129 ↗
14. Dip-coating method of preparation of a silicon-modified acrylic resin hydrophobic coating with corrosion resistance for copper–aluminum composite10.1007/s11665-024-10414-9 ↗
15. Evaluation of heat resistant properties of silicone‐acrylic polyol coating by electrochemical methods10.1108/03699421311301106 ↗
16. Preparation of superhydrophobic coating with anti-corrosion and anti-fouling properties on the surface of low manganese steel by electrodeposition10.1016/j.surfcoat.2023.129412 ↗
17. Corrosion protection of Zn-Mo coatings electrodeposited from alkaline solutions10.1016/j.surfcoat.2023.129737 ↗
18. Electrodeposited ZIF-67 reinforced polypyrrole coating on ferritic stainless steel substrate with durable anticorrosion performance
19. Characterization of high absorbance and high-emissivity black NiCe oxide composite coatings produced via photo-assisted electrodeposition10.1016/j.surfcoat.2022.129173 ↗
20. Low-cost fabrication methods of ZnO nanorods and their physical and photoelectrochemical properties for optoelectronic applications10.1038/s41598-024-73352-5 ↗
21. Photo-assisted electrodeposition of sol–gel films on p-type semiconductors10.1016/j.elecom.2015.10.002 ↗
22. Electrosynthesis of cerium containing silicon acrylate coatings with antifouling and corrosion resistant properties
23. Superhydrophobic and photocatalytic self-cleaning surfaces by atmospheric pressure plasma jet deposited hydroxyapatite, titanium-dioxide silicone-like multilayers10.1016/j.surfcoat.2025.132265 ↗
24. The effect of plasma-polymerized cerium-doped hexamethyldisiloxane film thickness on corrosion protection of L-PBF AlSi10Mg10.1007/s00706-025-03408-3 ↗
25. Ceric ammonium nitrate catalyzed oxidation of aldehydes and alcohols10.1002/cjoc.201180406 ↗
26. The effect of cerium-based conversion treatment on the cathodic delamination and corrosion protection performance of carbon steel-fusion-bonded epoxy coating systems10.1016/j.apsusc.2016.09.140 ↗
27. Microstructure and electrochemical behavior of cerium conversion coating modified with silane agent on magnesium substrates10.1016/j.apsusc.2016.03.150 ↗
28. A novel high anti-corrosion performance polymer based composite coating with new functional fillers
29. Eco-friendly marine antifouling coating consisting of cellulose nanocrystals with bioinspired micromorphology10.1016/j.carbpol.2022.120504 ↗
30. Strengthen corrosion resistance of epoxy coating by synergy of oxygen vacancies of CeO2 nanoparticles as charge capture centers and BTA/TEOS
31. Mechanical properties, corrosion resistance and microstructural analysis of recycled aggregate concrete made with ceramic wall waste and ultrafine ceria10.1016/j.jmrt.2025.03.154 ↗