journal article·2026-10

Enhanced green and blue/yellow photoluminescence in composite coatings synthesized on titanium by plasma electrolytic oxidation via Ce3+→Tb3+ and Ce3+→Dy3+ energy transfer

Stevan Stojadinović, Aleksandar Ćirić

Publisher page

Abstract

This study examines the synthesis and photoluminescence (PL) properties of composite coatings formed by plasma electrolytic oxidation (PEO) on titanium substrates, specifically designed as UV-to-VIS conversion layers through rare-earth ions functionalization. The research successfully created high-integrity single-doped (Tb3+, Dy3+) PEO coatings in phosphate-aluminate electrolyte using Tb4O7 and Dy2O3 particles as additives, as well as co-doped (Ce3+/Tb3+, Ce3+/Dy3+) coatings by adding Ce(CH3COO)3 as the precursor for the co-doped systems. The PEO coatings have a crystalline structure mainly consisting of anatase and rutile TiO2 phases and Al2TiO5; notably, cerium-doped variants also contain CePO4. Steady-state PL shows that in Tb3+ single-doped coatings, the PL emission spectra are dominated by sharp 4f→4f line emissions, specifically the green 5D4→7F5 transition at 541 nm. Within the Tb4O7 concentration range of 0.25 to 2.0 g/L, the PL intensity increases monotonically, indicating that the critical distance for concentration quenching has not been reached. In contrast, Dy3+ single-doped coatings exhibit characteristic blue 4F9/2 → 6H15/2 emission at 480 nm and yellow 4F9/2 → 6H13/2 emission at 573 nm. The PL emission intensity for Dy3+ peaks at a Dy2O3 concentration of 1.0 g/L; above this level, a marked decrease in PL intensity is observed at 2.0 g/L, indicating non-radiative energy migration and subsequent concentration quenching. Ce3+ in PEO coatings exhibits a broad 5d→4f PL emission band centered at 395 nm under near-UV excitation with a main excitation band at 275 nm, confirming strong UV absorption suitable for sensitising Tb3+ and Dy3+ activators. In Ce3+/Tb3+ and Ce3+/Dy3+ co-doped PEO coatings, Ce3+ emission is progressively quenched, while Tb3+ or Dy3+ emission is strongly enhanced, indicating efficient energy transfer from Ce3+ to the activators. The calculated energy-transfer efficiencies reach 83% for Ce3+→Tb3+ at 2.0 g/L Tb4O7 and 94% for Ce3+→Dy3+ at 2.0 g/L Dy2O3. PL excitation spectra monitored at the activator emission wavelengths are dominated by Ce3+ absorption features, confirming sensitized emission pathways. Ce3+ sensitization produces PL gains of up to approximately 3800% for Tb3+ and 2600% for Dy3+ compared to single-doped coatings with equivalent activator concentration, demonstrating the practical impact of the sensitizer-activator architecture. The concentration dependence and spectral overlap are consistent with dipole–dipole energy transfer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Pigment Synthesis and Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Recent progress in surface modification of metals coated by plasma electrolytic oxidation: principle, structure, and performance10.1016/j.pmatsci.2020.100735 ↗
2. A review of recent work on discharge characteristics during plasma electrolytic oxidation of various metals10.1080/09506608.2018.1466492 ↗
3. A comprehensive overview in improving corrosion resistance of Mg alloys: enhancing protective coatings with plasma electrolytic oxidation and superhydrophobic coatings10.1016/j.jma.2025.02.023 ↗
4. Plasma electrolytic oxidation (PEO) coatings on aluminum alloy 2024: a review of mechanisms, processes, and corrosion resistance enhancement10.1016/j.apsadv.2025.100707 ↗
5. Influence of sodium aluminate concentration and process duration on microstructure, mechanical and electrochemical behavior of PEO coatings formed on CP-Ti10.1016/j.surfcoat.2021.127240 ↗
6. A review on plasma electrolytic oxidation coatings for organic pollutant degradation: how to prepare them and what to expect of them?10.1016/j.jece.2023.110027 ↗
7. Micro-arc oxidation surface-modification of titanium alloys for biomedical applications: mechanisms, advances, challenges, and prospects
8. On the enhanced antibacterial activity of plasma electrolytic oxidation (PEO) coatings that incorporate particles: a review10.1016/j.ceramint.2020.05.206 ↗
9. Plasma electrolytic oxidation coatings for photoluminescent applications
10. Rare earth (RE) doped phosphors and their emerging applications: a review10.1016/j.ceramint.2021.03.308 ↗
11. Insight into the physical, structural, thermal and spectroscopic characteristics of intense green luminescent Tb3+ incorporated lithium alumino-borate glasses for green LED application10.1016/j.molstruc.2025.142523 ↗
12. A review of the efficiency of white light (or other) emissions in singly and co-doped Dy3+ ions in different host (phosphate, silicate, aluminate) materials10.1007/s10895-023-03250-y ↗
13. Recent developments in phosphors with different emitting colours via energy transfer10.1039/C6TC00436A ↗
14. Efficient green emission via energy transfer in CaLuAlO4:Ce3+,Tb3+ phosphors for high-quality warm white lighting10.1016/j.ceramint.2025.12.404 ↗
15. Development of near-ultraviolet-excitable single-phase white-light-emitting phosphor KBaY(BO3)2:Ce3+,Dy3+ for phosphor-converted white light-emitting-diodes10.1016/j.ceramint.2018.05.111 ↗
16. Photoluminescence of ZrO2:Gd3+ and ZrO2:Dy3+ coatings formed by the plasma electrolytic oxidation10.1016/j.jallcom.2020.154907 ↗
17. High photocatalytic activity of TiO2/Al2TiO5 coatings obtained by plasma electrolytic oxidation of titanium10.1016/j.matlet.2023.134069 ↗
18. Photocatalytic and photoluminescent properties of Er3+ doped TiO2/Al2TiO5 coatings formed by plasma electrolytic oxidation of titanium10.1016/j.optmat.2025.116873 ↗
19. Photoluminescence of ZnO:Eu3+ and ZnO:Tb3+ coatings formed by plasma electrolytic oxidation of pure zinc substrate10.1016/j.jlumin.2021.118022 ↗
20. Structural, luminescence emission and photocatalytic properties of pure and Dy3+ doped anatase TiO2 nanorods10.1016/j.matchemphys.2023.127312 ↗
21. Concentration effects of fluorescence quenching and optical transition properties of Dy3+ doped NaYF4 phosphor10.1016/j.jallcom.2021.162616 ↗
22. Dy3+-doped niobate phosphor based on charge transfer band red-shift effect: luminescence thermal stability and temperature sensing performance10.1016/j.jallcom.2024.176899 ↗
23. Luminescence spectroscopy and energy level location of lanthanide ions doped in La(PO3)310.1016/j.jlumin.2014.06.029 ↗
24. Efficient green emission via energy transfer in CaLuAlO4:Ce3+,Tb3+ phosphors for high-quality warm white lighting10.1016/j.ceramint.2025.12.404 ↗
25. Luminescence and energy transfer in CsLaSiS4 single crystals doped with Tb3+ and Ce3+ ions10.1016/j.optmat.2024.116484 ↗
26. Spectroscopic properties and tunable colour emission via Ce3+/Dy3+ energy transfer in K2O–Al2O3–P2O5 glasses for solid-state lighting and scintillation applications10.1016/j.jallcom.2025.184294 ↗
27. Energy transfer from Ce3+ to Dy3+ ions for white light emission in Sr2MgAl22O36:Ce3+,Dy3+ phosphor10.1016/j.jlumin.2018.10.092 ↗
28. Review of luminescent properties of Ce3+-doped garnet phosphors: new insight into the effect of crystal and electronic structure
29. Recent progress in luminescence tuning of Ce3+ and Eu2+-activated phosphors for pc-WLEDs10.1039/C4CS00446A ↗
30. Luminescence properties and energy transfer in Tb3+ and Eu3+ co-doped Ba2P2O7 phosphors10.1039/C6RA28122B ↗
31. Resonance energy transfer: from fundamental theory to recent applications10.3389/fphy.2019.00100 ↗
32. A theory of sensitized luminescence in solids10.1063/1.1699044 ↗